SIST EN 3475-411:2015

Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids

This standard specifies methods of measuring the fluid resistance of a finished cable. It shall be used together with EN 3475-100, EN 3909 and TR 4542.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 411: Beständigkeit gegen Flüssigkeiten

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 411: Résistance aux fluides

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 411. del: Odpornost proti tekočinam

Ta standard določa metode za merjenje odpornosti končanega kabla proti tekočinam. Uporabljati ga je treba s standardi EN 3475-100, EN 3909 in TR 4542.

General Information

• Status: Withdrawn
• Publication Date: 19-Jan-2015
• Withdrawal Date: 09-Sep-2018
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Sep-2018
• Due Date: 03-Oct-2018
• Completion Date: 10-Sep-2018
• Ref Project: EN 3475-411:2014 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids

Relations

• Replaced By: SIST EN 3475-411:2018 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• Effective Date: 22-Aug-2018
• Replaces: SIST EN 3475-411:2006 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• Effective Date: 01-Feb-2015
• Revised: SIST EN 3475-411:2018 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
• Effective Date: 12-Apr-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 411: Beständigkeit gegen FlüssigkeitenSérie aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 411: Résistance aux fluidesAerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-411:2014SIST EN 3475-411:2015en,fr,de01-februar-2015SIST EN 3475-411:2015SLOVENSKI
STANDARDSIST EN 3475-411:20061DGRPHãþD



SIST EN 3475-411:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3475-411
November 2014 ICS 49.060 Supersedes EN 3475-411:2005English Version
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 411: Resistance to fluids
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 411: Résistance aux fluides
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 411: Beständigkeit gegen Flüssigkeiten This European Standard was approved by CEN on 11 October 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3475-411:2014 ESIST EN 3475-411:2015



EN 3475-411:2014 (E) 2 Contents Page Foreword .3 1 Scope .3 2 Normative references .3 3 Test fluids .4 4 Procedures .4 5 Requirements .7 SIST EN 3475-411:2015



EN 3475-411:2014 (E) 3 Foreword This document (EN 3475-411:2014) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2015, and conflicting national standards shall be withdrawn at the latest by May 2015. This document supersedes EN 3475-411:2005. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. 1 Scope This European Standard specifies two methods of determining the fluid resistance of a finished cable. Method 1: occasional contamination. Method 2: contamination test. It shall be used together with EN 3475-100 and EN 3909. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3475-100, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 100: General EN 3475-201, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 201: Visual examination EN 3475-203, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 203: Dimensions EN 3475-302, Aerospace series - Cable, electrical, aircraft use - Test methods - Part 302: Voltage proof test EN 3475-405, Aerospace series - Cables, electrical, aircraft use - Test methods - Part 405: Bending at
...