iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10282:2001

(Main)

Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

This European Standard is intended to define a measurement method for the determination of the characteristics of surface insulation resistance of magnetic sheet and strip.  This method is applicable to magnetic sheet and strip insulated on one or both surfaces and is suitable for manufacturing control in the application of insulation coatings.

Magnetische Werkstoffe - Meßverfahren zur Bestimmung des Oberflächenisolationswiderstandes von Elektroblech und -band

Zweck dieser Internationalen Norm ist es, ein Meßverfahren zur Bestimmung der Eigenschaften des Oberflächenisolationswiderstandes von Elektroblech und -band festzulegen. Dieses Verfahren ist für Elektroblech und -band anwendbar, welches auf einer oder beiden Seiten isoliert ist, und es ist zur Produktionskontrolle beim Auftragen der Isolationsbeschichtung geeignet.

Matériaux magnétiques - Méthode d'essai pour la détermination de la résistance d'isolement superficiel des tôles et bandes magnétiques

La présente norme européenne a pour objet de définir une méthode de mesure pour la détermination des caractéristiques de résistance d'isolement superficiel des tôles et feuillards magnétiques.  Cette méthode est applicable aux tôles ou feuillards magnétiques isolés sur une ou deux faces et est adaptée au contrôle de fabrication dans le cas d'application de revetements isolants.

Magnetni materiali - Metoda preskušanja za ugotovitev upornosti površinske izolacije elektropločevin in trakov

General Information

Status
Withdrawn
Publication Date
31-Oct-2001
Withdrawal Date
20-Oct-2016
ICS
29.030 - Magnetic materials
77.140.50 - Flat steel products and semi-products
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
21-Oct-2016
Due Date
13-Nov-2016
Completion Date
21-Oct-2016
Ref Project
EN 10282:2001 - Magnetic materials - Method of test for the determination of surface insulation resistance of electrical sheet and strip

Buy Standard

EN 10282:2001EN 10282:2001
PreviousNext
Standard
EN 10282:2001
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RYUãLQVNHMagnetische Werkstoffe - Meßverfahren zur Bestimmung des Oberflächenisolationswiderstandes von Elektroblech und -bandMatériaux magnétiques - Méthode d'essai pour la détermination de la résistance d'isolement superficiel des tôles et bandes magnétiquesMagnetic materials - Method of test for the determination of surface insulation resistance of elec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10251:2015(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
EN 10251:2015

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
-   flatness;
-   residual curvature;
-   edge camber;
-   deviation from the shearing line due to internal stresses;
-   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10252:1998(Main)
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
EN 10252:1997

This European Standard is applicable to magnetic steel sheet and strip for the construction of magnetic circuits for use in the frequency range 400 Hz to 10 000 Hz. Its object is to define the terminology and to specify the methods for the measurement of magnetic properties of magnetic steel sheet and strip.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10265:1997(Main)
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10265:1995

This European standard defines the grades of steel and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic properties, the dimensional tolerances as well as the conditions of acceptance. This European Standard applies to material used for the poles and rims of rotating electrical machines. These materials correspond to clause D2 of IEC 404-1.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10251:2023(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
prEN 10251

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10251:2015(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
EN 10251:2015

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
-   flatness;
-   residual curvature;
-   edge camber;
-   deviation from the shearing line due to internal stresses;
-   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10342:2005(Main)
Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations
EN 10342:2005

This document establishes a classification of surface insulations for electrical steel sheet, strip and laminations according to their general composition, relative insulating ability and function.
These surface insulations are either oxide layers or applied coatings.
The purpose of this classification is to create a nomenclature for the various types of surface insulations and to assist users of surface insulations by providing general information about the chemical nature and use of the surface insulations.
It is not the intent of this classification to specify insulation requirements in terms of specific values of surface insulation resistance. Such requirements are to be agreed between the purchaser and the steel producer, where applicable.
The classification is to be used in conjunction with the various specifications for cold rolled electrical steels (see the European Standards listed in Clause 2).

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10252:1998(Main)
Magnetic materials - Methods of measurement of magnetic properties of magnetic steel sheet and strip at medium frequencies
EN 10252:1997

This European Standard is applicable to magnetic steel sheet and strip for the construction of magnetic circuits for use in the frequency range 400 Hz to 10 000 Hz. Its object is to define the terminology and to specify the methods for the measurement of magnetic properties of magnetic steel sheet and strip.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10265:1997(Main)
Magnetic materials - Specification for steel sheet and strip with specified mechanical properties and magnetic permeability
EN 10265:1995

This European standard defines the grades of steel and strip with specified mechanical properties and magnetic permeability. In particular it gives the technological, mechanical and magnetic properties, the dimensional tolerances as well as the conditions of acceptance. This European Standard applies to material used for the poles and rims of rotating electrical machines. These materials correspond to clause D2 of IEC 404-1.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 10251:2023(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
prEN 10251

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day