Passive neutron dosimetry systems - Part 2: Methodology and criteria for the qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)

This document provides methodology and criteria to qualify the dosimetry system at workplaces where
it is used. The criteria in this document apply to dosimetry systems which do not meet the criteria with
regard to energy and direction dependent responses described in ISO 21909-1.
The qualification of the dosimetry system at workplace aims to demonstrate that:
— either, the non-conformity of the dosimetry system to some of the requirements on the energy or
direction dependent responses defined in ISO 21909-1 does not lead to significant discrepancies in
the dose determination for a certain workplace field;
— or, that the correction factor or function used for this specific studied workplace enables the
dosimetry system to accurately determine the conventional dose value with uncertainties similar
to the ones given in ISO 21909-1.
The methodologies to characterize the work place field in order to perform the qualification of the
dosimetry system are given in Annex A. Annex B is complementary as it gives the practical methods to
follow, once one methodology is chosen.
The provider of the dosimetry system shall provide the type test results corresponding to ISO 21909-1.
However, when the dosimetry system to be qualified does not comply with all the criteria of ISO 21909-1
dealing with the energy and angle dependence of the response, some tests of the ISO 21909-1 can be not
performed.

Passive Dosimetriesysteme für Neutronenstrahlung - Teil 2: Verfahren und Kriterien für die Qualifizierung von Personendosimetriesystemen an Arbeitsplätzen (ISO 21909-2:2021)

Dieses Dokument enthält Verfahren und Kriterien zur Qualifizierung des Dosimetriesystems an Arbeitsplätzen, an denen es eingesetzt wird. Die Kriterien in diesem Dokument gelten für Dosimetriesysteme, die die in ISO 21909-1 beschriebenen Kriterien hinsichtlich der Energie- und Richtungsabhängigkeit des Ansprechver¬mögens nicht erfüllen.
Die Qualifizierung des Dosimetriesystems am Arbeitsplatz zielt darauf ab, Folgendes nachzuweisen:
–   entweder die Nichtübereinstimmung des Dosimetriesystems mit einigen der in ISO 21909-1 festgelegten Anforderungen an die Energie- oder Richtungsabhängigkeit des Ansprechvermögens führt nicht zu signi¬fikanten Diskrepanzen bei der Dosisbestimmung für ein bestimmtes Arbeitsfeld;
–   oder der für diesen speziell untersuchten Arbeitsplatz verwendete Korrektionsfaktor bzw. die verwendete Korrektionsfunktion ermöglicht dem Dosimetriesystem, den richtigen Wert der Dosis genau zu bestimmen, mit ähnlichen Unsicherheiten, wie sie in ISO 21909-1 angegeben sind.
ANMERKUNG   Dieses Dokument richtet sich an alle beteiligten Akteure: Personendosis-Messstellen (IMS, en: individual monitoring service), Akkreditierungs- oder Aufsichtsbehörden und Anwender der jeweiligen Dosimetrie (mit Anwender ist die Stelle gemeint, die das Dosimetriesystem der strahlenexponierten Arbeitskraft zuordnet und die zugeordnete Dosis aufzeichnet).
Die Verfahren zur Charakterisierung des Arbeitsplatzes im Hinblick auf die Qualifizierung des Dosimetriesys¬tems sind in Anhang A aufgeführt. Anhang B ist eine Ergänzung, da er die praktischen Verfahren enthält, die zu befolgen sind, sobald ein Verfahren gewählt wurde.
Der Anbieter des Dosimetriesystems muss die Ergebnisse der Bauartprüfung nach ISO 21909-1 vorlegen. Erfüllt das zu qualifizierende Dosimetriesystem nicht alle Kriterien der ISO 21909-1, die sich mit der Energie- und Winkelabhängigkeit des Ansprechvermögens befassen, können einige Prüfungen der ISO 21909-1 nicht durchgeführt werden.
Die Verknüpfungen zwischen ISO 21909-1 und ISO 21909-2 sind in Anhang E beschrieben.
Dieses Dokument bezieht sich ausschließlich auf die reguläre Personenüberwachung für Neutronenstrahlung und nicht auf die Bedingungen eines Kritikalitätsereignisses.

Systèmes dosimétriques passifs pour les neutrons - Partie 2: Méthodologie et critères de qualification des systèmes dosimétriques individuels aux postes de travail (ISO 21909-2:2021)

Sistemi pasivne nevtronske dozimetrije - 2. del: Metodologija in merila za kvalifikacijo osebnih dozimetričnih sistemov na delovnih mestih (ISO 21909-2:2021)

Ta dokument podaja metodologijo in merila za kvalifikacijo dozimetričnega sistema na delovnih mestih, kjer se uporablja. Merila iz tega dokumenta se uporabljajo za dozimetrične sisteme, ki ne izpolnjujejo meril glede odzivov, ki so opisani v standardu ISO 21909-1.
Cilj kvalifikacije dozimetričnega sistema na delovnem mestu je pokazati, da:
– dozimetrični sistem ni skladen z nekaterimi zahtevami glede odzivov, odvisnih od energije ali
smeri, ki so določeni v standardu ISO 21909-1, kar ne povzroča bistvenih neskladij pri
določanju doze za delovno mesto na določenem področju;
– ali pa lahko s korekcijskim faktorjem ali funkcijo, ki se uporablja za to določeno proučevano delovno mesto,
dozimetrični sistem natančno določi vrednost običajne doze z negotovostmi, ki so podobne
tistim iz standarda ISO 21909-1.
Metodologije za karakterizacijo področja delovnega mesta za izvedbo kvalifikacije
dozimetričnega sistema so podane v dodatku A. Dodatek B je dopolnilo, saj podaja praktične metode, ki jih je treba upoštevati ob izbiri katere od metodologij.
Ponudnik dozimetričnega sistema mora zagotoviti rezultate tipskega preskusa, ki ustrezajo standardu ISO 21909-1.
Kadar dozimetrični sistem za kvalifikacijo ne izpolnjuje vseh meril iz standarda ISO 21909-1, ki obravnava odvisnost odziva od energije in kota, nekateri preskusi iz standarda ISO 21909-1 niso mogoči.

General Information

Status
Published
Public Enquiry End Date
13-Jun-2023
Publication Date
20-Aug-2023
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
26-Jul-2023
Due Date
30-Sep-2023
Completion Date
21-Aug-2023

Buy Standard

Standard
EN ISO 21909-2:2023 - BARVE
English language
40 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 21909-2:2023 - BARVE
English language
37 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 21909-2:2023
01-september-2023
Sistemi pasivne nevtronske dozimetrije - 2. del: Metodologija in merila za
kvalifikacijo osebnih dozimetričnih sistemov na delovnih mestih (ISO 21909-
2:2021)
Passive neutron dosimetry systems - Part 2: Methodology and criteria for the
qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)
Systèmes dosimétriques passifs pour les neutrons - Partie 2: Méthodologie et critères de
qualification des systèmes dosimétriques individuels aux postes de travail (ISO 21909-
2:2021)
Ta slovenski standard je istoveten z: EN ISO 21909-2:2023
ICS:
13.280 Varstvo pred sevanjem Radiation protection
17.240 Merjenje sevanja Radiation measurements
SIST EN ISO 21909-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 21909-2:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 21909-2:2023


EN ISO 21909-2
EUROPEAN STANDARD

NORME EUROPÉENNE

July 2023
EUROPÄISCHE NORM
ICS 13.280
English Version

Passive neutron dosimetry systems - Part 2: Methodology
and criteria for the qualification of personal dosimetry
systems in workplaces (ISO 21909-2:2021)
Systèmes dosimétriques passifs pour les neutrons -
Partie 2: Méthodologie et critères de qualification des
systèmes dosimétriques individuels aux postes de
travail (ISO 21909-2:2021)
This European Standard was approved by CEN on 16 July 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21909-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 21909-2:2023
EN ISO 21909-2:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 21909-2:2023
EN ISO 21909-2:2023 (E)
European foreword
The text of ISO 21909-2:2021 has been prepared by Technical Committee ISO/TC 85 "Nuclear energy,
nuclear technologies, and radiological protection” of the International Organization for Standardization
(ISO) and has been taken over as EN ISO 21909-2:2023 by Technical Committee CEN/TC 430 “Nuclear
energy, nuclear technologies, and radiological protection” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2190
...

SLOVENSKI STANDARD
oSIST prEN ISO 21909-2:2023
01-maj-2023
Sistemi pasivne nevtronske dozimetrije - 2. del: Metodologija in merila za
kvalifikacijo osebnih dozimetričnih sistemov na delovnih mestih (ISO 21909-
2:2021)
Passive neutron dosimetry systems - Part 2: Methodology and criteria for the
qualification of personal dosimetry systems in workplaces (ISO 21909-2:2021)
Systèmes dosimétriques passifs pour les neutrons - Partie 2: Méthodologie et critères de
qualification des systèmes dosimétriques individuels aux postes de travail (ISO 21909-
2:2021)
Ta slovenski standard je istoveten z: prEN ISO 21909-2
ICS:
13.280 Varstvo pred sevanjem Radiation protection
17.240 Merjenje sevanja Radiation measurements
oSIST prEN ISO 21909-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 21909-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 21909-2:2023
INTERNATIONAL ISO
STANDARD 21909-2
First edition
2021-12
Passive neutron dosimetry systems —
Part 2:
Methodology and criteria for the
qualification of personal dosimetry
systems in workplaces
Systèmes dosimétriques passifs pour les neutrons —
Partie 2: Méthodologie et critères de qualification des systèmes
dosimétriques individuels aux postes de travail
Reference number
ISO 21909-2:2021(E)
© ISO 2021

---------------------- Page: 3 ----------------------
oSIST prEN ISO 21909-2:2023
ISO 21909-2:2021(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
  © ISO 2021 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 21909-2:2023
ISO 21909-2:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 2
3.1 General terms and definitions . 2
3.2 Quantities . 3
3.3 Calibration and evaluation . . 4
3.4 Symbols . 6
4 Documentation and communication to the users . 7
5 Recommendations about the workplace to consider . 7
6 Methodologies and criteria to qualify the personal dosimetry system at a certain
workplace . 8
6.1 Choice of the methods to be used for the qualification at workplaces .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.