SIST EN ISO 13164-4:2023
(Main)Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2023)
Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation counting (ISO 13164-4:2023)
ISO 13164-4:2015 describes a test method for the determination of radon-222 (222Rn) activity concentration in non-saline waters by extraction and liquid scintillation counting.
The radon-222 activity concentrations, which can be measured by this test method utilizing currently available instruments, are at least above 0,5 Bq l−1 for a 10 ml test sample and a measuring time of 1 h.
This test method can be used successfully with drinking water samples and it is the responsibility of the laboratory to ensure the validity of this test method for water samples of untested matrices.
Annex A gives indication on the necessary counting conditions to meet the required detection limits for drinking water monitoring.
Wasserbeschaffenheit - Radon-222 - Teil 4: Verfahren mittels zweistufiger Flüssigszintillationszählung (ISO 13164-4:2023)
Dieses Dokument beschreibt ein Prüfverfahren zur Bestimmung der Aktivitätskonzentration von Radon-222 (222Rn) in nicht salzhaltigen Gewässern durch Extraktion und Flüssigszintillationszählverfahren.
Die Radon-222-Aktivitätskonzentrationen, die mit diesem Verfahren unter Verwendung derzeit verfügba
rer Instrumente gemessen werden können, liegen über0,5Bq⋅l−1, was die typische Nachweisgrenze für eine10-ml-Analysenprobe und einen Messzeitraum von1h ist.
Es liegt in der Verantwortung des Labors, die Gültigkeit dieses Verfahrens für Wasserproben nicht geprüfter Matrizen sicherzustellen.
AnhangA enthält Angaben zu den erforderlichen Zählbedingungen, um die für die Trinkwasserüberwachung erforderlichen Nachweisgrenzen zu erreichen.
WARNUNG— Dieses Dokument erhebt nicht den Anspruch, alle Sicherheitsprobleme im Zusammen
hang mit seiner Verwendung zu behandeln. Es liegt in der Verantwortung des Arbeitgebers,
sene Sicherheits- und Schutzmaßnahmen zu treffen und sicherzustellen, dass diese mit nationalen Festlegungen übereinstimmen.
WICHTIG— Es ist unerlässlich, dass nach diesem Dokument durchgeführte Untersuchungen von ent
sprechend qualifiziertem Personal durchgeführt werden.
Qualité de l'eau - Radon 222 - Partie 4: Méthode d'essai par comptage des scintillations en milieu liquide à deux phases (ISO 13164-4:2023)
L'ISO 13164-4:2015 spécifie une méthode d'essai permettant de déterminer l'activité volumique du radon 222 (222Ra) dans des eaux non salines par extraction et comptage des scintillations en milieu liquide.
Les valeurs d'activité volumique du radon 222 qui peuvent être mesurées par cette méthode d'essai à l'aide d'instruments actuellement disponibles, sont au moins supérieures à 0,5 Bq l−1 pour une prise d'essai de 10 ml et un temps de comptage de 1 h.
Cette méthode d'essai peut être utilisée avec succès sur des échantillons d'eau potable et il appartient au laboratoire de s'assurer de la validité de cette méthode d'essai pour des échantillons d'eau provenant de matrices non testées.
L'Annexe A donne une indication sur les conditions de comptage nécessaires pour obtenir les limites de détection requises pour la surveillance de l'eau potable.
Kakovost vode - Radon Rn-222 - 4. del: Preskusna metoda s štetjem z dvofaznim tekočinskim scintilatorjem (ISO 13164-4:2023)
Standard ISO 13164-4:2015 opisuje preskusno metodo za določevanje koncentracije aktivnosti radona Rn-222 (222Rn) v neslanih vodah z ekstrakcijo in štetjem s tekočinskim scintilatorjem.
Koncentracije aktivnosti radona Rn-222, ki jih je mogoče izmeriti s to preskusno metodo in trenutno razpoložljivimi instrumenti, so vsaj nad 0,5 Bq l−1 za 10 ml preskusnega vzorca in čas merjenja 1 h.
Ta preskusna metoda se lahko uspešno uporablja pri vzorcih pitne vode, laboratorij pa mora zagotovi veljavnost te preskusne metode za vzorce vode nepreskušenih matric.
Dodatek A nakazuje potrebne pogoje štetja za izpolnjevanje zahtevanih meja zaznavanja za spremljanje stanja pitne vode.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13164-4:2023
01-november-2023
Nadomešča:
SIST EN ISO 13164-4:2020
Kakovost vode - Radon Rn-222 - 4. del: Preskusna metoda s štetjem z dvofaznim
tekočinskim scintilatorjem (ISO 13164-4:2023)
Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation
counting (ISO 13164-4:2023)
Wasserbeschaffenheit - Radon-222 - Teil 4: Verfahren mittels zweistufiger
Flüssigszintillationszählung (ISO 13164-4:2023)
Qualité de l'eau - Radon 222 - Partie 4: Méthode d'essai par comptage des scintillations
en milieu liquide à deux phases (ISO 13164-4:2023)
Ta slovenski standard je istoveten z: EN ISO 13164-4:2023
ICS:
13.060.60 Preiskava fizikalnih lastnosti Examination of physical
vode properties of water
17.240 Merjenje sevanja Radiation measurements
SIST EN ISO 13164-4:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13164-4:2023
---------------------- Page: 2 ----------------------
SIST EN ISO 13164-4:2023
EN ISO 13164-4
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2023
EUROPÄISCHE NORM
ICS 13.060.60; 13.280; 17.240 Supersedes EN ISO 13164-4:2020
English Version
Water quality - Radon-222 - Part 4: Test method using
two-phase liquid scintillation counting (ISO 13164-
4:2023)
Qualité de l'eau - Radon 222 - Partie 4: Méthode d'essai
par comptage des scintillations en milieu liquide à
deux phases (ISO 13164-4:2023)
This European Standard was approved by CEN on 12 June 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13164-4:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13164-4:2023
EN ISO 13164-4:2023 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13164-4:2023
EN ISO 13164-4:2023 (E)
European foreword
This document (EN ISO 13164-4:2023) has been prepared by Technical Committee ISO/TC 147 "Water
quality" in collaboration with Technical Committee CEN/TC 230 “Water analysis” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2024, and conflicting national standards shall
be withdrawn at the latest by January 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 13164-4:2020.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 13164-4:2023 has been approved by CEN as EN ISO 13164-4:2023 without any
modific
...
SLOVENSKI STANDARD
oSIST prEN ISO 13164-4:2022
01-april-2022
Kakovost vode - Radon Rn-222 - 4. del: Preskusna metoda s štetjem z dvofaznim
tekočinskim scintilatorjem (ISO/DIS 13164-4:2022)
Water quality - Radon-222 - Part 4: Test method using two-phase liquid scintillation
counting (ISO/DIS 13164-4:2022)
Qualité de l'eau - Radon 222 - Partie 4: Méthode d'essai par comptage des scintillations
en milieu liquide à deux phases (ISO/DIS 13164-4:2022)
Ta slovenski standard je istoveten z: prEN ISO 13164-4
ICS:
13.060.60 Preiskava fizikalnih lastnosti Examination of physical
vode properties of water
17.240 Merjenje sevanja Radiation measurements
oSIST prEN ISO 13164-4:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 13164-4:2022
---------------------- Page: 2 ----------------------
oSIST prEN ISO 13164-4:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 13164-4
ISO/TC 147/SC 3 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-02-07 2022-05-02
Water quality — Radon-222 —
Part 4:
Test method using two-phase liquid scintillation counting
Qualité de l'eau — Radon 222 —
Partie 4: Méthode d'essai par comptage des scintillations en milieu liquide à deux phases
ICS: 17.240; 13.060.60; 13.280
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 13164-4:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
---------------------- Page: 3 ----------------------
oSIST prEN ISO 13164-4:2022
ISO/DIS 13164-4:2022(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
© ISO 2022 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 13164-4:2022
ISO/DIS 13164-4:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
3.1 Terms and definitions . 1
3.2 Symbols . 2
4 Principle . 2
5 Reagents and apparatus .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.