SIST EN IEC 61753-043-02:2022

Fibre optic interconnecting devices and passive components - Performance standard - Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C - Controlled environment (IEC 61753-043-02:2022)

This part of IEC 61753 specifies the test requirements for wavelength selective cords used in a controlled environment (Category C) according to IEC 61753-1: 2018, where the connectors already comply with the Category C requirements of IEC 61753-1: 2018. The tests selected are a subset of the connector tests from IEC 61753-1: 2018 appropriate for requalification with additional requirements relevant to cords and the connector/cable interface.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 043-02: Wellenlängenselektive Bauelemente in Simplex-Patchkabelbauform mit zylindrischen Ferrule-Steckverbindern für die Kategorie C - Kontrollierte Umgebung (IEC 61753-043-02:2022)

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance - Partie 043-02: Dispositifs sélectifs en longueur d'onde à fibres unimodales de type cordon simplex de brassage avec des connecteurs à férules cylindriques pour la catégorie C - Environnement contrôlé (IEC 61753-043-02:2022)

IEC 61753-043-02: 2022 spécifie les exigences d’essai pour les cordons sélectifs en longueur d’onde utilisés dans un environnement contrôlé (catégorie C) selon l’IEC 61753­1: 2018, lorsque les connecteurs sont déjà conformes aux exigences de la catégorie C de l’IEC 61753­1: 2018. Les essais choisis constituent un sous-ensemble des essais de connecteurs de l’IEC 61753-1: 2018 appropriés pour la requalification avec des exigences supplémentaires pour les cordons et l’interface connecteur/câble.

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 043-02. del: Simpleksne valovnodolžinsko selektivne naprave z enorodovnim optičnim vlaknom s cilindričnimi tulčastimi konektorji za kategorijo C - Nadzorovano okolje (IEC 61753-043-02:2022)

General Information

• Status: Published
• Publication Date: 16-Oct-2022
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Oct-2022
• Due Date: 18-Dec-2022
• Completion Date: 17-Oct-2022
• Ref Project: EN IEC 61753-043-02:2022 - Fibre optic interconnecting devices and passive components - Performance standard - Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C - Controlled environment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61753-043-02:2022
01-december-2022

Optični spojni elementi in pasivne komponente - Izvedbeni standard - 043-02. del:

Simpleksne valovnodolžinsko selektivne naprave z enorodovnim optičnim

vlaknom s cilindričnimi tulčastimi konektorji za kategorijo C - Nadzorovano okolje

(IEC 61753-043-02:2022)

Fibre optic interconnecting devices and passive components - Performance standard -

Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices

with cylindrical ferrule connectors for category C - Controlled environment (IEC 61753-

043-02:2022)

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil

043-02: Wellenlängenselektive Bauelemente in Simplex-Patchkabelbauform mit

zylindrischen Ferrule-Steckverbindern für die Kategorie C - Kontrollierte Umgebung (IEC

61753-043-02:2022)

Dispositifs d'interconnexion et composants passifs fibroniques - Norme de performance -

Partie 043-02: Dispositifs sélectifs en longueur d'onde à fibres unimodales de type

cordon simplex de brassage avec des connecteurs à férules cylindriques pour la
catégorie C - Environnement contrôlé (IEC 61753-043-02:2022)
Ta slovenski standard je istoveten z: EN IEC 61753-043-02:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 61753-043-02:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61753-043-02:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 61753-043-02:2022
EUROPEAN STANDARD EN IEC 61753-043-02
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2022
ICS 33.180.20
English Version
Fibre optic interconnecting devices and passive components -
Performance standard - Part 043-02: Simplex patch-cord style
single-mode fibre wavelength selective devices with cylindrical
ferrule connectors for category C - Controlled environment
(IEC 61753-043-02:2022)

Dispositifs d'interconnexion et composants passifs Lichtwellenleiter - Verbindungselemente und passive

fibroniques - Norme de performance - Partie 043-02: Bauteile - Betriebsverhalten - Teil 043-02:

Dispositifs sélectifs en longueur d'onde à fibres unimodales Wellenlängenselektive Bauelemente in Simplex-

de type cordon simplex de brassage avec des connecteurs Patchkabelbauform mit zylindrischen Ferrule-

à férules cylindriques pour la catégorie C - Environnement Steckverbindern für die Kategorie C - Kontrollierte

contrôlé Umgebung
(IEC 61753-043-02:2022) (IEC 61753-043-02:2022)

This European Standard was approved by CENELEC on 2022-10-03. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 61753-043-02:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 61753-043-02:2022
EN IEC 61753-043-02:2022 (E)
European foreword

The text of document 86B/4635/FDIS, future edition 1 of IEC 61753-043-02, prepared by SC 86B

"Fibre optic interconnecting devices and passive components" of IEC/TC 86 "Fibre optics" was

submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 61753-043-

02:2022.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2023-07-03

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2025-10-03

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 61753-043-02:2022 was approved by CENELEC as a

European Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards

indicated:
IEC 60794-2 (series) NOTE Harmonized as EN 60794-2 (series)
IEC 61300 (series) NOTE Harmonized as EN 61300 (series)
IEC 61753 (series) NOTE Harmonized as EN 61753 (series)
IEC 61753-041-2 NOTE Harmonized as EN 61753-041-2
IEC 61753-042-2 NOTE Harmonized as EN 61753-042-2
IEC 61753-121-2 NOTE Harmonized as EN 61753-121-2
IEC 61755-1 NOTE Harmonized as EN 61755-1
IEC 61755-2-5 NOTE Harmonized as EN 61755-2-5
IEC 61756-1 NOTE Harmonized as EN IEC 61756-1
---------------------- Page: 4 ----------------------
SIST EN IEC 61753-043-02:2022
EN IEC 61753-043-02:2022 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the

relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification
for class B single-mode fibres
IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor EN IEC 60794-2-50 -
optical fibre cables - Family
specification for simplex and duplex
cables for use in terminated cable
assemblies
IEC 61300-1 - Fibre optic interconnecting devices EN IEC 61300-1 -
and passive components - Basic test
and measurement procedures - Part
1: General and guidance
IEC 61300-2-1 - Fibre optic interconnecting devices EN 61300-2-1 -
and passive components - Basic test
and measurement procedures - Part
2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-2 - Fibre optic interconnecting devices EN 61300-2-2 -
and passive components - Basic test
and measurement procedures - Part
2-2: Tests - Mating durability
IEC 61300-2-4 - Fibre optic interconnecting devices EN IEC 61300-2-4 -
and passive components - Basic test
and measurement procedures - Part
2-4: Tests - Fibre or cable retention
IEC 61300-2-5 - Fibre optic interconnecting devices EN 61300-2-5 -
and passive components - Basic test
and measurement procedures - Part
2-5: Tests - Torsion
IEC 61300-2-6 - Fibre optic interconnecting devices EN 61300-2-6 -
and passive components - Basic test
and measurement procedures - Part
2-6: Tests - Tensile strength of
coupling mechanism
---------------------- Page: 5 ----------------------
SIST EN IEC 61753-043-02:2022
EN IEC 61753-043-02:2022 (E)
IEC 61300-2-12 - Fibre optic interconnecting devices EN 61300-2-12 -
and passive components - Basic test
and measurement procedures - Part
2-12: Tests - Impact
IEC 61300-2-17 - Fibre optic interconnecting devices EN 61300-2-17 -
and passive components - Basic test
and measurement procedures - Part
2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices EN 61300-2-18 -
and passive components - Basic test
and measurement procedures - Part
2-18: Tests - Dry heat - High
temperature endurance
IEC 61300-2-19 - Fibre optic interconnecting devices EN 61300-2-19 -
and passive components - Basic test
and measurement procedures - Part
2-19: Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices EN 61300-2-22 -
and passive components - Basic test
and measurement procedures - Part
2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices EN 61300-2-42 -
and passive components - Basic test
and measurement procedures - Part
2-42: Tests - Static side load for strain
relief
IEC 61300-2-44 - Fibre optic interconnecting devices EN 61300-2-44 -
and passive components - Basic test
and measurement procedures - Part
2-44: Tests - Flexing of the strain relief
of fibre optic devices
IEC 61300-3-1 - Fibre optic interconnecting devices EN 61300-3-1 -
and passive components - Basic test
and measurement procedures - Part
3-1: Examinations and measurements
- Visual examination
IEC 61300-3-6 - Fibre optic interconnecting devices EN 61300-3-6 -
and passive components - Basic test
and measurement procedures - Part
3-6: Examinations and measurements
- Return loss
IEC 61300-3-22 - Fibre optic interconnecting devices EN 61300-3-22 -
and passive components - Basic test
and measurement procedures - Part
3-22: Examinations and
measurements - Ferrule compression
force
IEC 61300-3-25 - Fibre optic interconnecting devices EN 61300-3-25 -
and passive components - Basic test
and measurement procedures - Part
3-25: Examinations and
measurements - Concentricity of non-
angled ferrules and non-angled
ferrules with fibre installed
---------------------- Page: 6 ----------------------
SIST EN IEC 61753-043-02:2022
EN IEC 61753-043-02:2022 (E)
IEC 61300-3-26 - Fibre optic interconnecting devices EN 61300-3-26 -
and passive components - Basic test
and measurement procedures - Part
3-26: Examinations and
measurements - Measurement of the
angular misalignment between fibre
and ferrule axes
IEC 61300-3-34 - Fibre optic interconnecting devices EN 61300-3-34 -
and passive components - Basic test
and measurement procedures - Part
3-34: Examinations and
measurements - Attenuation of
random mated connectors
IEC 61300-3-35 - Fibre optic interconnecting devices EN 61300-3-35 -
and passive components - Basic test
and measurement procedures - Part
3-35: Examinations and
measurements - Visual inspection of
fibre optic connectors and fibre-stub
transceivers
IEC 61300-3-47 - Fibre optic interconnecting devices EN 61300-3-47 -
and passive components - Basic test
and measurement procedures - Part
3-47: Examinations and
measurements - End face geometry of
PC/APC spherically polished ferrules
using interferometry
IEC 61753-1 2018 Fibre optic interconnecting devices EN IEC 61753-1 2018
and passive components -
Performance standard - Part 1:
General and guidance
IEC 61753-021-2 - Fibre optic interconnecting devices EN 61753-021-2 -
and passive components performance
standard - Part 021-2: Grade C/3
single-mode fibre optic connectors for
category C - Controlled environment
IEC 61754 series Fibre optic interconnecting devices EN 61754 series
and passive components - Fibre optic
connector interfaces
IEC 61755 series Fibre optic interconnecting devices EN IEC 61755 series
and passive components - Connector
optical interfaces
IEC 61977 - Fibre optic interconnecting devices EN IEC 61977 -
and passive components - Fibre optic
fixed filters - Generic specification
IEC/TR 61931 - Fibre optic - Terminology - -
---------------------- Page: 7 ----------------------
SIST EN IEC 61753-043-02:2022
---------------------- Page: 8 ----------------------
SIST EN IEC 61753-043-02:2022
IEC 61753-043-02
Edition 1.0 2022-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective
devices with cylindrical ferrule connectors for category C – Controlled
environment
Dispositifs d’interconnexion et composants passifs fibroniques – Norme de
performance –
Partie 043-02: Dispositifs sélectifs en longueur d’onde à fibres unimodales de
type cordon simplex de brassage avec des connecteurs à férules cylindriques
pour la catégorie C – Environnement contrôlé
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-5631-2

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN IEC 61753-043-02:2022
– 2 – IEC 61753-043-02:2022 © IEC 2022
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 6

1 Scope .............................................................................................................................. 7

2 Normative references ...................................................................................................... 7

3 Terms and definitions ...................................................................................................... 9

4 Description ...................................................................................................................... 9

4.1 General ................................................................................................................... 9

4.2 Optical fibres .......................................................................................................... 9

4.3 Cable design and construction .............................................................................. 10

4.4 Optical connectors ................................................................................................ 10

4.4.1 Mechanical connectivity ................................................................................. 10

4.4.2 Optical performance requirements ................................................................. 10

4.4.3 Connector set performance requirements ...................................................... 10

4.5 Cable bend radius ................................................................................................. 10

5 Tests ............................................................................................................................. 10

5.1 General ................................................................................................................. 10

5.2 Measurement wavelengths .................................................................................... 10

5.3 Device under test .................................................................................................. 10

5.4 Test report ............................................................................................................ 11

6 Test procedure .............................................................................................................. 11

6.1 General ................................................................................................................. 11

6.2 Visual examination ................................................................................................ 11

6.3 Fibre optic connector plug end face ...................................................................... 11

6.4 Optical performance requirements ........................................................................ 11

6.5 Environmental performance requirements ............................................................. 12

6.6 Mechanical performance requirements .................................................................. 15

Annex A (normative) Sample size requirements ................................................................... 19

Annex B (normative) Visual examination of outer cable sheath movement ........................... 20

B.1 General ................................................................................................................. 20

B.2 Preparation of the DUT and initial visual examination ........................................... 20

B.3 Final visual examination of outer cable sheath movement ..................................... 20

Annex C (normative) Change of temperature ....................................................................... 21

Annex D (informative) Functional principle of wavelength selective cords ............................ 22

Annex E (informative) Samples of application of wavelength selective cords ........................ 23

Bibliography .......................................................................................................................... 25

Figure B.1 – Initial marking of the cable sheath ..................................................................... 20

Figure B.2 – Final visual examination.................................................................................... 20

Figure C.1 – Change of temperature test configuration ......................................................... 21

Figure D.1 – Functional principle .......................................................................................... 22

Figure E.1 – Increasing isolation of a WDM........................................................................... 23

Figure E.2 – Migration of PON to CWDM-PON ...................................................................... 24

Figure E.3 – Protecting receiver against OTDR pulse ........................................................... 24

---------------------- Page: 10 ----------------------
SIST EN IEC 61753-043-02:2022
IEC 61753-043-02:2022 © IEC 2022 – 3 –

Table 1 – Wavelengths for attenuation and return loss measurements .................................. 10

Table 2 – Visual examination requirements ........................................................................... 11

Table 3 – End face requirements .......................................................................................... 11

Table 4 – Optical performance requirements ......................................................................... 12

Table 5 – Environmental performance requirements ............................................................. 13

Table 6 – Mechanical performance requirements .................................................................. 15

Table A.1 – Sample size requirements .................................................................................. 19

---------------------- Page: 11 ----------------------
SIST EN IEC 61753-043-02:2022
– 4 – IEC 61753-043-02:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 043-02: Simplex patch-cord style single-mode fibre wavelength
selective devices with cylindrical ferrule connectors for category C –
Controlled environment
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

IEC 61753-043-02 has been prepared by subcommittee 86B: Fibre optic interconnecting

devices and passive components, of IEC technical committee 86: Fibre optics. It is an

International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
86B/4635/FDIS 86B/4654/RVD

Full information on the voting for its approval can be found in the report on voting indicated in

the above table.
The language used for the development of this International Standard is English.
---------------------- Page: 12 ----------------------
SIST EN IEC 61753-043-02:2022
IEC 61753-043-02:2022 © IEC 2022 – 5 –

This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available

at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are

described in greater detail at www.iec.ch/standardsdev/publications.

A list of all parts of IEC 61753 series, published under the general title Fibre optic

interconnecting devices and passive components – Performance standard, can be found on the

IEC website.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under webstore.iec.ch in the data related to the

specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
---------------------- Page: 13 ----------------------
SIST EN IEC 61753-043-02:2022
– 6 – IEC 61753-043-02:2022 © IEC 2022
INTRODUCTION

Wavelength selective cords combine features and functions from cords as described in the

IEC 61753-12x series and from filters as described in IEC 61977. Additional information about

functional principle and application can be found in Annex D and Annex E.

The cords consist of simplex fibre optic cable terminated at each end of the cable with single-

mode fibre optic connector plugs with cylindrical ferrules. The operating wavelength range is

between 1 260 nm and 1 660 nm. Short length cords are used as test samples as the attenuation

of the cord and the temperature cycling performance will be affected by longer lengths of cable.

It is important that any qualification of a cord whose length is greater than 5 m takes these

factors into account.

The relevant requirements for the mechanical interface of connector sets are covered by

IEC 61754 (all parts). The relevant requirements for the optical interface of single-mode fibre

optical connector sets are covered by IEC 61755 (all parts). The relevant requirements for

performance of connector sets are covered by IEC 61753-1:2018. The relevant requirements

for single-mode fibres are covered by IEC 60793-2-50. The relevant requirements for cables for

cords are covered by IEC 60794-2-50.
---------------------- Page: 14 ----------------------
SIST EN IEC 61753-043-02:2022
IEC 61753-043-02:2022 © IEC 2022 – 7 –
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 043-02: Simplex patch-cord style single-mode fibre wavelength
selective devices with cylindrical ferrule connectors for category C –
Controlled environment
1 Scope

This part of IEC 61753 specifies the test requirements for wavelength selective cords used in a

controlled environment (category C) according to IEC 61753-1:2018, where the connectors

already comply with the category C requirements of IEC 61753-1:2018. The tests selected are

a subset of the connector tests from IEC 61753-1:2018 appropriate for requalification with

additional requirements relevant to cords and the connector/cable interface.
2 Normative references

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies.

For undated references, the latest edition of the referenced document (including any

amendments) applies.

IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for

class B single-mode fibres

IEC 60794-2-50, Optical fibre cables – Part 2-50: Indoor cables – Family specification for

simplex and duplex cables for use in terminated cable assemblies

IEC 61300-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 1: General and guidance

IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)

IEC 61300-2-2, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-2: Tests – Mating durability

IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-4: Tests – Fibre or cable retention

IEC 61300-2-5, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-5: Tests – Torsion

IEC 61300-2-6, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-6: Tests – Tensile strength of coupling mechanism

IEC 61300-2-12, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-12: Tests – Impact

IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-17: Tests – Cold
---------------------- Page: 15 ----------------------
SIST EN IEC 61753-043-02:2022
– 8 – IEC 61753-043-02:2022 © IEC 2022

IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-18: Tests – Dry heat

IEC 61300-2-19, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-19: Tests – Damp heat (steady state)

IEC 61300-2-22, Fibre optic interconnecting devices and passive components – Basic test and

measurement procedures – Part 2-22: Tests – Change of tem
...