SIST EN 15336:2007
(Main)Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)
Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)
This European Standard describes a procedure for the determination of the time to failure of a bonded joint, using a specimen which is statically loaded under specified conditions. This method can only be used for comparing adhesives, and the results cannot be used for design purposes.
Klebstoffe - Bestimmung der Zeit bis zum Bruch geklebter Fügeverbindungen unter statischer Belastung (ISO 15109:1998 modifiziert)
Adhésifs - Détermination du temps jusqu'a la rupture de joints collés soumis a une charge statique (ISO 15109:1998 modifiée)
La présente Norme européenne décrit une méthode permettant de déterminer le temps jusqu'a la rupture d'un joint collé en utilisant une éprouvette soumise a une charge statique dans des conditions spécifiées. Il s'agit uniquement d'une méthode de comparaison des adhésifs et les résultats ne peuvent en aucun cas etre utilisés pour des besoins de conception.
Lepila - Določanje časa pretrganja lepljenih spojev pri statični obremenitvi (ISO 15109:1998, spremenjen)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives - Determination of the time to rupture of bonded joints under static load (ISO 15109:1998 modified)Adhésifs - Détermination du temps jusqu'a la rupture de joints collés soumis a une charge statique (ISO 15109:1998 modifiée)Klebstoffe - Bestimmung der Zeit bis zum Bruch geklebter Fügeverbindungen unter statischer Belastung (ISO 15109:1998 modifiziert)Ta slovenski standard je istoveten z:EN 15336:2007SIST EN 15336:2007en,fr,de83.180LepilaAdhesivesICS:SLOVENSKI
STANDARDSIST EN 15336:200701-september-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15336February 2007ICS 83.180 English VersionAdhesives - Determination of the time to rupture of bonded jointsunder static load ( ISO 15109:1998 modified)Adhésifs - Détermination du temps jusqu'à la rupture dejoints collés soumis à une charge statique (ISO 15109:1998modifiée)Klebstoffe - Bestimmung der Zeit bis zum Bruch geklebterFügeverbindungen unter statischer Belastung (ISO15109:1998 modifiziert)This European Standard was approved by CEN on 29 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15336:2007: E
EN 15336:2007 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Principle.5 4 Apparatus.5 5 Specimens.5 5.1 Adherend material.5 5.2 Shape and dimensions.5 5.3 Cleaning and surface treatment of adherends.6 5.4 Preparation of specimens.6 5.5 Conditioning and testing atmosphere.6 5.6 Number of specimens.6 6 Procedure.6 7 Expression of results.7 8 Precision.7 9 Test report.7
EN 15336:2007 (E) 3 Foreword This document (EN 15336:2007) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2007, and conflicting national standards shall be withdrawn at the latest by August 2007. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyp
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.