SIST EN ISO 17249:2005/A1:2007

Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO 17249:2004/Amd 1:2007)

Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte - Änderung 1 (ISO 17249:2004/Amd 1:2007)

Chaussures de sécurité résistantes aux coupures de scie a chaîne - Amendement 1 (ISO 17249:2004/Amd 1:2007)

Zaščitna obutev, odporna proti urezu z verižno žago - Dopolnilo 1 (ISO 17249:2004/Amd 1:2007)

General Information

• Status: Withdrawn
• Publication Date: 15-Aug-2007
• Withdrawal Date: 08-Jan-2014
• ICS: 13.340.50 - Leg and foot protection
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Jan-2014
• Due Date: 31-Jan-2014
• Completion Date: 09-Jan-2014
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Directive: 93/68/EEC - Council Directive amending Dir. 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC and 73/23/EEC
• Directive: 93/95/EEC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Directive: 96/58/EC - Personal protective equipment (Dir. 89/686/EEC amendment)
• Mandate: M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
• Ref Project: EN ISO 17249:2004/A1:2007 - Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO 17249:2004/Amd 1:2007)

Relations

• Amends: SIST EN ISO 17249:2005 - Safety footwear with resistance to chain saw cutting - (ISO 17249:2004)
• Effective Date: 01-Sep-2007
• Replaced By: SIST EN ISO 17249:2014 - Safety footwear with resistance to chain saw cutting (ISO 17249:2013)
• Effective Date: 01-Feb-2014
• Amends: SIST EN ISO 17249:2005 - Safety footwear with resistance to chain saw cutting - (ISO 17249:2004)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17249:2005/A1:2007
01-september-2007
=DãþLWQDREXWHYRGSRUQDSURWLXUH]X]YHULåQRåDJR'RSROQLOR,62
$PG
Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO
17249:2004/Amd 1:2007)
Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte - Änderung 1 (ISO
17249:2004/Amd 1:2007)
Chaussures de sécurité résistantes aux coupures de scie a chaîne - Amendement 1
(ISO 17249:2004/Amd 1:2007)
Ta slovenski standard je istoveten z: EN ISO 17249:2004/A1:2007
ICS:
13.340.50 =DãþLWQDREXWHY Protective footwear
SIST EN ISO 17249:2005/A1:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 17249:2004/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2007
ICS 13.340.50

English Version
Safety footwear with resistance to chain saw cutting -
Amendment 1 (ISO 17249:2004/Amd 1:2007)
Chaussures de sécurité résistantes aux coupures de scie à Sicherheitsschuhe mit Schutz gegen Kettensägenschnitte
chaîne - Amendement 1 (ISO 17249:2004/Amd 1:2007) (ISO 17249:2004/Amd 1:2007)
This amendment A1 modifies the European Standard EN ISO 17249:2004; it was approved by CEN on 23 December 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17249:2004/A1:2007: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17249:2004/A1:2007 (E)





Foreword


This document (EN ISO 17249:2004/A1:2007) has been prepared by Technical Committee
CEN/TC 161 "Foot and leg protectors", the secretariat of which is held by BSI, in collaboration
with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment".

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by July 2007, and conflicting national standards
shall be withdrawn at the latest by July 2007.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United
Kingdom.

2

---------------------- Page: 3 ----------------------

EN ISO 17249:2004/A1:2007 (E)




ANNEX ZA
(informative)

Relationship between this International Standard and the Essential
Requirements of EU Directive 89/686 EEC



This International Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide one means of conforming to
Essential Requirements of the New Approach Directive 89/686/EEC.

Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been
...

SLOVENSKI SIST EN ISO
17249:2005/oprA1:2006

PREDSTANDARD
februar 2006
Zaščitna obutev, odporna proti urezu z verižno žago – Dopolnilo 1 (ISO
17249:2004/DAM 1:2005)
Safety footwear with resistance to chain saw cutting - Amendment 1 (ISO
17249:2004/DAM 1:2005)
ICS 13.340.50 Referenčna številka
SIST EN ISO
17249:2005/oprA1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
DRAFT
EN ISO 17249:2004
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2005
ICS 13.340.50

English Version
Safety footwear with resistance to chain saw cutting -
Amendment 1 (ISO 17249:2004/DAM 1:2005)
Chaussures de sécurité résistantes aux coupures de scie à
chaîne - Amendement 1 (ISO 17249:2004/DAM 1:2005)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 161.
This draft amendment A1, if approved, will modify the European Standard EN ISO 17249:2004. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status
as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17249:2004/prA1:2005:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17249:2004/prA1:2005 (E)





Foreword


This document (EN ISO 17249:2004/prA1:2005) has been prepared by Technical Committee
CEN/TC 161 "Foot and leg protectors", the secretariat of which is held by BSI, in collaboration
with Technical Committee ISO/TC 94 "Personal safety - Protective clothing and equipment".

This document is currently submitted to the parallel Enquiry.

This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).

2

---------------------- Page: 3 ----------------------

PROJET D'AMENDEMENT ISO17249:2004/DAmd 1
ISO/TC 94/SC 3 Secrétariat: BSI
Début de vote Vote clos le

2005-12-01 2006-05-01
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Chaussures de sécurité résistantes aux coupures de scie à chaîne
AMENDEMENT 1
Safety footwear with resistance to chain saw cutting
AMENDMENT 1
ICS 13.340.50



ENQUÊTE PARALLÈLE ISO/CEN
Le présent projet de Norme internationale est un projet de norme élaboré dans le cadre du Comité
européen de normalisation (CEN) et soumis selon le mode de collaboration sous la direction du CEN,
tel que défini dans l'Accord de Vienne. Le document a été transmis à l'ISO par le CEN en vue d'être
diffusé pour vote des comités membres de l'ISO en parallèle avec l'enquête au sein du CEN. Les
observations recueillies au sein de l'ISO, y com
...