Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU

The present document applies to Radiosondes in the Meteorological Aids service to be used in the 400,15 MHz to
406 MHz frequency range with power levels ranging up to 200 mW.
The present document contains requirements to demonstrate that "... Radio equipment shall be so constructed that it
both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference" [i.1].

Meteorološki pripomočki (Met Aids) - Radiosonde za uporabo v frekvenčnem območju od 400,15 MHz do 406 MHz z močnostnimi nivoji do največ 200 mV - 2. del: Harmonizirani standard, ki zajema bistvene zahteve člena 3.2 direktive 2014/53/EU

Ta dokument velja za radiosonde v meteoroloških pripomočkih (Met Aids) za uporabo v frekvenčnem območju od 400,15 MHz do 406 MHz z močnostnimi nivoji do največ 200 mV – 2. Ta dokument zajema zahteve za dokaz, da »... je radijska oprema sestavljena tako, da učinkovito uporablja in tudi podpira učinkovito uporabo radijskega spektra, tako da ne pride do škodljivega motenja« [i.1].

General Information

Status
Published
Publication Date
06-Jan-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Nov-2015
Due Date
09-Jan-2016
Completion Date
07-Jan-2016

Buy Standard

Standard
EN 302 054-2 V1.2.1:2016
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Standard
ETSI EN 302 054-2 V1.2.0 (2015-06) - Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU
English language
11 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHQþQHP(8Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunications07.060Geologija. Meteorologija. HidrologijaGeology. Meteorology. HydrologyICS:Ta slovenski standard je istoveten z:EN 302 054-2 V1.2.1SIST EN 302 054-2 V1.2.1:2016en,fr,de01-februar-2016SIST EN 302 054-2 V1.2.1:2016SLOVENSKI
STANDARD



SIST EN 302 054-2 V1.2.1:2016



ETSI EN 302 054-2 V1.2.1 (2015-10) Meteorological Aids (Met Aids); Radiosondes to be used in the 400,15 MHz to 406 MHz frequency range with power levels ranging up to 200 mW; Part 2: Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU
HARMONISED EUROPEAN STANDARD SIST EN 302 054-2 V1.2.1:2016



ETSI ETSI EN 302 054-2 V1.2.1 (2015-10) 2
Reference REN/ERM-JTFEA-26 Keywords radio, regulation, short range, testing, UHF ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 302 054-2 V1.2.1:2016



ETSI ETSI EN 302 054-2 V1.2.1 (2015-10) 3 Contents Intellectual Property Rights . 4 Foreword . 4 Modal verbs terminology . 4 Executive summary . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions, symbols and abbreviations . 6 3.1 Definitions . 6 3.2 Symbols . 6 3.3 Abbreviations . 7 4 Technical requirements specifications . 7 4.1 Environmental profile . 7 4.2 Conformance requirements . 7 4.2.1 Transmitter requirements . 7 4.2.1.1 Frequency error . 7 4.2.1.2 Carrier power (conducted) . 7 4.2.1.3 Effective radiated power . 7 4.2.1.4 Modulation bandwidth . 7 4.2.1.5 Spurious emissions . 7 4.2.1.6 Frequency stability under low-voltage conditions . 7 5 Testing for compliance with technical requirements . 8 5.1 Environmental conditions for testing . 8 5.1.1 Normal and extreme test-conditions . 8 5.1.2 Test power source . 8 5.2 Interpretation of the measurement results . 8 5.3 Radio test suites . 8 5.3.1 Transmitter test specifications . 8 5.3.1.1 Frequency error . 8 5.3.1.2 Carrier power (conducted) . 8 5.3.1.3 Effective radiated power . 9 5.3.1.4 Modulation bandwidth . 9 5.3.1.5 Spurious emissions . 9 5.3.1.6 Frequency stability under low-voltage conditions . 9 Annex A (normative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 10 History . 11
SIST EN 302 054-2 V1.2.1:2016



ETSI ETSI EN 302 054-2 V1.2.1 (2015-10) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been prepared in reply to the Commission's standardisation request Commission Implementing Decision C(2015) 5376 final of 04.08.2015 to provide a means of conforming to the essential requirements of Directive 2014/53/EU on "the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment" - also known as the Radio Equipment Directive [i.1]. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 2 of a multi-part deliverable covering digitally modulated Radiosonde transmitters in the Meteorological Aids frequency band from 400,15 MHz to 406 MHz, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU".
National transposition dates Date of adoption of this EN: 22 October 2015 Date of latest announcement of this EN (doa): 31 January 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2016 Date of withdrawal of any conflicting National Standard (dow): 31 July 2017
Modal verbs terminology In the present documen
...

Draft ETSI EN 302 054-2 V1.2.0 (2015-06)






HARMONISED EUROPEAN STANDARD
Meteorological Aids (Met Aids);
Radiosondes to be used in the 400,15 MHz to 406 MHz
frequency range with power levels ranging up to 200 mW;
Part 2: Harmonised Standard covering the essential
requirements of article 3.2 of the Directive 2014/53/EU

---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 054-2 V1.2.0 (2015-06)



Reference
REN/ERM-JTFEA-26
Keywords
radio, regulation, short range, testing, UHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2015.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 054-2 V1.2.0 (2015-06)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
Executive summary . 5
1 Scope . 6
2 References . 6
2.1 Normative references . 6
2.2 Informative references . 6
3 Definitions, symbols and abbreviations . 6
3.1 Definitions . 6
3.2 Symbols . 6
3.3 Abbreviations . 7
4 Technical requirements specifications . 7
4.1 Environmental profile . 7
4.2 Conformance requirements . 7
4.2.1 Transmitter requirements . 7
4.2.1.1 Frequency error . 7
4.2.1.2 Carrier power (conducted) . 7
4.2.1.3 Effective radiated power . 7
4.2.1.4 Modulation bandwidth . 7
4.2.1.5 Spurious emissions . 7
4.2.1.6 Frequency stability under low-voltage conditions . 7
5 Testing for compliance with technical requirements . 8
5.1 Environmental conditions for testing . 8
5.1.1 Normal and extreme test-conditions . 8
5.1.2 Test power source . 8
5.2 Interpretation of the measurement results . 8
5.3 Radio test suites . 8
5.3.1 Transmitter test specifications . 8
5.3.1.1 Frequency error . 8
5.3.1.2 Carrier power (conducted) . 8
5.3.1.3 Effective radiated power . 9
5.3.1.4 Modulation bandwidth . 9
5.3.1.5 Spurious emissions . 9
5.3.1.6 Frequency stability under low-voltage conditions . 9
Annex A (normative): Relationship between the present document and the essential
requirements of Directive 2014/53/EU . 10
History . 11

ETSI

---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 054-2 V1.2.0 (2015-06)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This draft Harmonised European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic
compatibility and Radio spectrum Matters (ERM), and is now submitted for the combined Public Enquiry and Vote
phase of the ETSI standards EN Approval Procedure.
The present document has been prepared to provide a means of conforming to the essential requirements of Directive
2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the
Member States relating to the making available on the market of radio equipment and repealing Directive
1999/5/EC [i.1].
NOTE: The corresponding Commission's standardization request is expected shortly.
Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with
the normative clauses of the present document given in table A.1 confers, within the limits of the scope of the present
document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated
EFTA regulations.
The present document is part 2 of a multi-part deliverable, covering digitally modulated Radiosonde transmitters in the
Meteorological Aids frequency band from 400,15 MHz to 406 MHz, as identified below:
Part 1: "Technical characteristics and test methods";
Part 2: "Harmonised Standard covering the essential requirements of article 3.2 of the Directive
2014/53/EU".
Proposed national transposition dates
Date of latest announcement of this EN (doa): 3 months after ETSI publication
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 6 months after doa
Date of withdrawal of any conflicting National Standard (dow): 18 months after doa


Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 Draft
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.