SIST EN ISO 2811-2:2011
(Main)Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products, using balls or other round bodies as immersion bodies (plummets). The method is limited to materials of low or medium viscosity, and is particularly suitable for production control.
Beschichtungsstoffe - Bestimmung der Dichte - Teil 2: Tauchkörper-Verfahren (ISO 2811-2:2011)
Dieser Teil von ISO 2811 legt ein Verfahren zum Bestimmen der Dichte von Beschichtungsstoffen und
ähnlichen Produkten mit Kugeln oder anderen rotationssymmetrischen Körpern als Tauchkörper fest.
Das Verfahren ist nur für Stoffe mit niedriger oder mittlerer Viskosität bei der Prüftemperatur anwendbar, es
eignet sich besonders als Betriebsprüfverfahren.
Peintures et vernis - Détermination de la masse volumique - Partie 2: Méthode par immersion d'un corps (plongeur) (ISO 2811-2:2011)
L'ISO 2811-2:2011 spécifie une méthode de détermination de la masse volumique des peintures, vernis et produits assimilés au moyen de sphères ou d'autres corps ronds utilisés comme corps immergés (plongeurs).
Cette méthode est limitée aux produits de viscosité faible ou moyenne, et convient particulièrement au contrôle de production.
Barve in laki - Določevanje gostote - 2. del: Metoda s potapljanjem (ISO 2811-2:2011)
Ta del ISO 2811 določa metodo določevanja gostote barv, lakov in sorodnih proizvodov s potapljanjem žog ali drugih okroglih teles. Metoda je omejena na materiale nizke ali srednje viskoznosti in je predvsem primerna za nadzor nad proizvodnjo.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Beschichtungsstoffe - Bestimmung der Dichte - Teil 2: Tauchkörper-Verfahren (ISO 2811-2:2011)Peintures et vernis - Détermination de la masse volumique - Partie 2: Méthode par immersion d'un corps (plongeur) (ISO 2811-2:2011)Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)87.040Barve in lakiPaints and varnishesICS:Ta slovenski standard je istoveten z:EN ISO 2811-2:2011SIST EN ISO 2811-2:2011en,fr,de01-september-2011SIST EN ISO 2811-2:2011SLOVENSKI
STANDARDSIST EN ISO 2811-2:20021DGRPHãþD
SIST EN ISO 2811-2:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 2811-2
March 2011 ICS 87.040 Supersedes EN ISO 2811-2:2001English Version
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011)
Peintures et vernis - Détermination de la masse volumique - Partie 2: Méthode par immersion d'un corps (plongeur) (ISO 2811-2:2011)
Beschichtungsstoffe - Bestimmung der Dichte - Teil 2: Tauchkörper-Verfahren (ISO 2811-2:2011) This European Standard was approved by CEN on 19 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 2811-2:2011: ESIST EN ISO 2811-2:2011
EN ISO 2811-2:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 2811-2:2011
EN ISO 2811-2:2011 (E) 3 Foreword This document (EN ISO 2811-2:2011) has been prepared by Technical Committee ISO/TC 35 "Paints and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2011, and conflicting national standards shall be withdrawn at the latest by September 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 2811-2:2001. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 2811-2:2011 has been approved by CEN as a EN ISO 2811-2:2011 without any modification.
SIST EN ISO 2811-2:2011
SIST EN ISO 2811-2:2011
Reference numberISO 2811-2:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO2811-2Second edition2011-03-01Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method Peintures et vernis — Détermination de la masse volumique — Partie 2: Méthode par immersion d'un corps (plongeur)
SIST EN ISO 2811-2:2011
ISO 2811-2:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2011 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2011 – All rights reserved
SIST EN ISO 2811-2:2011
ISO 2811-2:2011(E) © ISO 2011 – All rights reserved iii Contents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Principle.1 5 Temperature.1 6 Apparatus.2 7 Sampling.3 8 Procedure.3 8.1 General.3 8.2 Determination.3 9 Calculation.4 10 Precision.5 10.1 General.5 10.2 Repeatability limit, r.5 10.3 Reproducibility limit, R.5 11 Test report.5 Annex A (informative)
Example of a calibration method.7 Annex B (informative)
Temperature variation.8
SIST EN ISO 2811-2:2011
ISO 2811-2:2011(E) iv © ISO 2011 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2811-2 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9, General test methods for paints and varnishes. This second edition cancels and replaces the first edition (ISO 2811-2:1997), which has been technically revised. The main changes are the following. a) The unit for the density has been changed from grams per millilitre to grams per cubic centimetre, because this is the more common SI unit. b) The determination in duplicate has been changed to a single determination. c) The information on calibration procedure has been changed to an example only and the status of Annex B has been changed from normative to informative. d) The precision data has been updated by an interlaboratory test. e) The normative references have been updated. ISO 2811 consists of the following parts, under the general title Paints and varnishes — Determination of density: ⎯ Part 1: Pyknometer method ⎯ Part 2: Immersed body (plummet) method ⎯ Part 3: Oscillation method ⎯ Part 4: Pressure cup method
SIST EN ISO 2811-2:2011
INTERNATIONAL STANDARD ISO 2811-2:2011(E) © ISO 2011 – All rights reserved 1 Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method 1 Scope This part of ISO 2811 specifies a method for determining the density of paints, varnishes and related products, using balls or other round bodies as immersion bodies (plummets). The method is limited to materials of low or medium viscosity, and is particularly suitable for production control. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1513, Paints and varnishes — Examination and preparation of test samples ISO 15528, Paints, varnishe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.