SIST EN 13331-2:2002
(Main)Trench lining systems - Part 2: Assessment by calculation or test
Trench lining systems - Part 2: Assessment by calculation or test
This second part of European Standard prEN 13331 specifies methods of calculation and test to assess conformity with Part 1. It is limited to steel, cast iron and aluminium for the principal components.
Grabenverbaugeräte - Teil 2: Nachweis durch Berechnung oder Prüfung
Dieser zweite Teil der Europäischen Norm prEN XXXX legt Verfahren zur Berechnung und Prüfung fest, um Übereinstimmung mit Teil 1 nachzuweisen. Dieser Teil ist auf Stahl, Gußeisen und Aluminium für die Hauptbauteile beschränkt.
Dispositifs de blindage de tranchées - Partie 2: Evaluation par calculs ou essais
La présente Norme européenne prescrit des méthodes de calcul et d'essais pour évaluer la conformité des dispositifs de blindage de tranchées avec les exigences de l'EN 13331-1.
Sistemi za razpiranje izkopov - 2. del: Dokaz z računom ali preskusom
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.XVRPGrabenverbaugeräte - Teil 2: Nachweis durch Berechnung oder PrüfungDispositifs de blindage de tranchées - Partie 2: Evaluation par calculs ou essaisTrench lining systems - Part 2: Assessment by calculation or test93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground worksICS:Ta slovenski standard je istoveten z:EN 13331-2:2002SIST EN 13331-2:2002en01-december-2002SIST EN 13331-2:2002SLOVENSKI
STANDARD
SIST EN 13331-2:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13331-2August 2002ICS 93.020English versionTrench lining systems - Part 2: Assessment by calculation ortestDispositifs de blindage de tranchées - Partie 2: Evaluationpar calculs ou essaisGrabenverbaugeräte - Teil 2: Nachweis durch Berechnungoder PrüfungThis European Standard was approved by CEN on 6 July 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13331-2:2002 ESIST EN 13331-2:2002
EN 13331-2:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Symbols.45General.56Assessment by calculation.57Assessment by testing.6Bibliography.7SIST EN 13331-2:2002
EN 13331-2:2002 (E)3ForewordThis document (EN 13331-2:2002) has been prepared by Technical Committee CEN/TC 53 "Temporary worksequipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2003, and conflicting national standards shall be withdrawn at the latestby February 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain,Sweden, Switzerland and the United Kingdom.EN 13331 Trench lining systems consists of the following parts: Part 1: Product specifications. Part 2: Assessment by calculation or test.These standards are to be read in conjunction with prEN 12811-2 and prEN 12811-3.SIST EN 13331-2:2002
EN 13331-2:2002 (E)4IntroductionTrench lining systems are intended to ensure the stability of vertical trench walls and to protect workers from theeffects of collapse of trenches.Part 1 of the series deals with materials and specifications on the manufacture of trench lining systems.Part 2 of the series deals with the evaluation methods using both calculations and tests for the trench liningsystems.A trench lining system comprises a variety of components, which, when assembled, create trench support. Theinstruction manual provides all the necessary information on the safe use of trench lining systems.1 ScopeThis European Standard specifies methods of calculation and tests to assess the conformity of trench liningsystems with the requirements of EN 13331-1.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 10002-1, Metallic materials - Tens
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.