SIST EN ISO 16484-6:2006

Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2005)

This standard provides a comprehensive set of procedures for  verifying the correct implementation of each capability claimed  on a BACnet PICS including the support of each claimed  BACnet service, either as an initiator, executor, or both and the  support of each claimed BACnet object-type, including both  required properties and each claimed opitonal property. Further  the support of the BACnet network layer protocol, the support of  each claimed data link option and the support of all claimed  special functionality.

Systeme der Gebäudeautomation - Teil 6: Datenübertragungsprotokoll Konformitätsprüfung (ISO 16484-6:2005)

Systemes d'automatisation et de gestion technique du bâtiment - Partie 6: Essais de conformité de la communication de données (ISO 16484-6:2005)

Avtomatizacija stavb in sistemi za regulacijo – 6. del: Protokol izmenjave preskušanja skladnosti (ISO 16484-6:2005)

General Information

• Status: Withdrawn
• Publication Date: 28-Feb-2006
• Withdrawal Date: 14-Apr-2009
• ICS: 35.240.67 - IT applications in building and construction industry
• ICS: 97.120 - Automatic controls for household use
• Technical Committee: OGS - Heating for buildings
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 25-Mar-2009
• Due Date: 17-Apr-2009
• Completion Date: 15-Apr-2009
• Ref Project: EN ISO 16484-6:2005 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2005)

Relations

• Replaced By: SIST EN ISO 16484-6:2009 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2009)
• Effective Date: 01-Jul-2009
• Replaced By: SIST EN ISO 16484-6:2009 - Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16484-6:2006
01-marec-2006
Avtomatizacija stavb in sistemi za regulacijo – 6. del: Protokol izmenjave
preskušanja skladnosti (ISO 16484-6:2005)
Building automation and control systems (BACS) - Part 6: Data communication
conformance testing (ISO 16484-6:2005)
Systeme der Gebäudeautomation - Teil 6: Datenübertragungsprotokoll
Konformitätsprüfung (ISO 16484-6:2005)
Systemes d'automatisation et de gestion technique du bâtiment - Partie 6: Essais de
conformité de la communication de données (ISO 16484-6:2005)
Ta slovenski standard je istoveten z: EN ISO 16484-6:2005
ICS:
35.240.99 8SRUDEQLãNHUHãLWYH,7QD IT applications in other fields
GUXJLKSRGURþMLK
97.120 Avtomatske krmilne naprave Automatic controls for
za dom household use
SIST EN ISO 16484-6:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16484-6:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 16484-6:2006
EUROPEAN STANDARD
EN ISO 16484-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 91.040.01

English Version
Building automation and control systems (BACS) - Part 6: Data
communication conformance testing (ISO 16484-6:2005)
Systèmes d'automatisation et de gestion technique du Systeme der Gebäudeautomation - Teil 6:
bâtiment - Partie 6: Essais de conformité de la Datenübertragungsprotokolle Konformitätsprüfung (ISO
communication de données (ISO 16484-6:2005) 16484-6:2005)
This European Standard was approved by CEN on 14 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16484-6:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16484-6:2006

EN ISO 16484-6:2005 (E)





Foreword


This document (EN ISO 16484-6:2005) has been prepared by Technical Committee ISO/TC 205
"Building environment design" in collaboration with Technical Committee CEN/TC 247 "Building
Automation, Controls and Building Management", the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 16484-6:2005 has been approved by CEN as EN ISO 16484-6:2005 without any
modifications.

2

---------------------- Page: 4 ----------------------

SIST EN ISO 16484-6:2006


INTERNATIONAL ISO
STANDARD 16484-6
First edition
2005-12-15


Building automation and control systems
(BACS) —
Part 6:
Data communication conformance testing
Systèmes d'automatisation et de gestion technique du bâtiment —
Partie 6: Essais de conformité de la communication de données




Reference number
ISO 16484-6:2005(E)
©
 ISO 2005

---------------------- Page: 5 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

© ISO 2005 – All rights reserved
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this Technical Report may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16484-6 was prepared by the American Society of Heating, Refrigerating and Air-Conditioning
Engineers (ASHRAE) as ANSI/ASHRAE 135.1-2003, and was adopted (without modifications except those
stated in Clause 2 of this International Standard) by Technical Committee ISO/TC 205, Building environment
design.
ISO 16484 consists of the following parts, under the general title Building automation and control
systems (BACS):
Part 2: Hardware
Part 3: Functions
Part 5: Data communication protocol
Part 6: Data communication conformance testing
The task of updating this part of ISO 16484 has been delegated to an ISO Maintenance Agency. Details are
given in the "Maintenance" clause overleaf.


© ISO 2005 – All rights reserved iii

---------------------- Page: 7 ----------------------

SIST EN ISO 16484-6:2006

---------------------- Page: 8 ----------------------

SIST EN ISO 16484-6:2006
INTERNATIONAL STANDARD ISO 16484-6:2005(E)

Building automation and control systems (BACS) —
Part 6:
Data communication conformance testing
Scope
This part of ISO 16484 defines a standard method for verifying that an implementation of the BACnet protocol
provides each capability claimed in its Protocol Implementation Conformance Statement (PICS) in conformance
with the BACnet standard (ISO 16484-5).
The scope is further detailed in Clause 2 of the enclosed ANSI/ASHRAE publication.
Recommendations
The technical recommendations are those made in the following publication (reproduced on the following pages),
which is adopted as an International Standard:
ANSI/ASHRAE 135.1-2003, Method for Test for Conformance to BACnet
International Standards cited in the text are the following:
ISO 16484-5, Building automation and control systems — Part 5: Data communication protocol
ISO 10646, Information technology — Universal Multiple-Octet Coded Character Set (UCS)
ISO/IEC 8802-2, Information technology — Telecommunications and information exchange between
systems — Local and metropolitan area networks — Specific requirements — Part 2: Logical link control
ISO/IEC 8802-3, Information technology — Telecommunications and information exchange between
systems — Local and metropolitan area networks — Specific requirements — Part 3: Carrier sense multiple
access with collision detection (CSMA/CD) access method and physical layer
ISO/IEC 8859-1, Information technology — 8-bit single-byte coded graphic character sets — Part 1: Latin
alphabet No. 1
Maintenance
The ISO Maintenance Agency for ISO 16484-5 and ISO 16484-6, as designated by the ISO Council, is
American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc.,
1791 Tullie Circle NE,
Atlanta,
GA 30329,
USA.
E-mail: [e-mail]
The procedures for the maintenance of ISO 16484-5 and ISO 16484-6 are available at
http://www.iso.org/tc205
or from the Maintenance Agency Secretariat at the above address.
© ISO 2005 – All rights reserved
1

---------------------- Page: 9 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)

© ISO 2005 – All rights reserved
2

---------------------- Page: 10 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)
Contents
CLAUSE PAGE
1. PURPOSE.7
2. SCOPE.7
3. DEFINITIONS .7
4. ELECTRONIC PICS FILE FORMAT .7
4.1 Character Encoding.7
4.2 Structure of EPICS Files.8
4.3 Character Strings.9
4.4 Notational Rules for Parameter Values.9
4.5 Sections of the EPICS File.10
5. EPICS CONSISTENCY TESTS .27
6. CONVENTIONS FOR SPECIFYING BACnet CONFORMANCE TESTS .28
6.1 TCSL Components.28
6.2 TCSL Statements .29
6.3 Time Dependencies.34
6.4 BACnet References.34
7. OBJECT SUPPORT TESTS.35
7.1 Read Support for Properties in the Test Database.35
7.2 Write Support for Properties in the Test Database.35
7.3 Object Functionality Tests .36
8. APPLICATION SERVICE INITIATION TESTS .106
8.1 AcknowledgeAlarm Service Initiation Tests .106
8.2 ConfirmedCOVNotification Service Initiation Tests.107
8.3 UnconfirmedCOVNotification Service Initiation Tests.116
8.4 ConfirmedEventNotification Service Initiation Tests.118
8.5 UnconfirmedEventNotification Service Initiation Tests.151
8.6 GetAlarmSummary Service Initiation Tests .158
8.7 GetEnrollmentSummary Service Initiation Tests .158
8.8 GetEventInformation Service Initiation Tests.160
8.9 LifeSafetyOperation Service Initiation Tests.160
8.10 SubscribeCOV Service Initiation Tests .161
8.11 SubscribeCOVProperty Service Initiation Tests.162
8.12 AtomicReadFile Service Initiation Tests .163
8.13 AtomicWriteFile Service Initiation Tests .163
8.14 AddListElement Service Initiation Tests .164
8.15 RemoveListElement Service Initiation Tests.165
8.16 CreateObject Service Initiation Tests.165
8.17 DeleteObject Service Initiation Tests.166
8.18 ReadProperty Service Initiation Tests.167
8.19 ReadPropertyConditional Service Initiation Tests.167
8.20 ReadPropertyMultiple Service Initiation Tests.168
8.21 ReadRange Service Initiation Tests .169
8.22 WriteProperty Service Initiation Tests.170
8.23 WritePropertyMultiple Service Initiation Tests .171
8.24 DeviceCommunicationControl Service Initiation Tests.173
8.25 ConfirmedPrivateTransfer Service Initiation Test .174
8.26 UnconfirmedPrivateTransfer Service Initiation Test .174
© ISO 2005 – All rights reserved
3

---------------------- Page: 11 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)
8.27 ReinitializeDevice Service Initiation Tests .175
8.28 ConfirmedTextMessage Service Initiation Tests .176
8.29 UnconfirmedTextMessage Service Initiation Tests .177
8.30 TimeSynchronization Service Initiation Tests .178
8.31 UTCTimeSynchronization Service Initiation Tests .178
8.32 Who-Has Service Initiation Tests.178
8.33 I-Have Service Initiation Tests.179
8.34 Who-Is Service Initiation Tests.179
8.35 I-Am Service Initiation Tests .180
8.36 VT-Open Service Initiation Tests.180
8.37 VT-Close Service Initiation Tests .181
8.38 VT-Data Service Initiation Tests.183
8.39 RequestKey Service Initiation Tests .184
8.40 Authenticate Service Initiation Tests .185
9. APPLICATION SERVICE EXECUTION TESTS.190
9.1 AcknowledgeAlarm Service Execution Tests.190
9.2 ConfirmedCOVNotification Service Execution Tests .203
9.3 UnconfirmedCOVNotification Service Execution Tests .207
9.4 ConfirmedEventNotification Service Execution Tests.207
9.5 UnconfirmedEventNotification Service Execution Tests.209
9.6 GetAlarmSummary Service Execution Tests.209
9.7 GetEnrollmentSummary Service Execution Tests .210
9.8 GetEventInformation Service Execution Tests .214
9.9 LifeSafetyOperation Service Execution Test .216
9.10 SubscribeCOV Service Execution Tests .218
9.11 SubscribeCOVProperty Service Execution Tests.223
9.12 AtomicReadFile Service Execution Tests.230
9.13 AtomicWriteFile Service Execution Tests .237
9.14 AddListElement Service Execution Tests.248
9.15 RemoveListElement Service Execution Tests.250
9.16 CreateObject Service Execution Tests .252
9.17 DeleteObject Service Execution Tests .255
9.18 ReadProperty Service Execution Tests .256
9.19 ReadPropertyConditional Service Execution Tests.258
9.20 ReadPropertyMultiple Service Execution Tests.259
9.21 ReadRange Service Execution Tests.264
9.22 WriteProperty Service Execution Tests .267
9.23 WritePropertyMultiple Service Execution Tests.270
9.24 DeviceCommunicationControl Service Execution Test.274
9.25 ConfirmedPrivateTransfer Service Execution Tests .278
9.26 UnconfirmedPrivateTransfer Service Execution Tests .278
9.27 ReinitializeDevice Service Execution Tests.278
9.28 ConfirmedTextMessage Service Execution Tests.281
9.29 UnconfirmedTextMessage Service Execution Tests.282
9.30 TimeSynchronization Service Execution Tests.282
9.31 UTCTimeSynchronization Service Execution Tests.284
9.32 Who-Has Service Execution Tests.284
9.33 Who-Is Service Execution Tests .290
9.34 VT-Open Service Execution Tests.293
9.35 VT-Close Service Execution Tests.295
9.36 VT-Data Service Execution Tests .296
9.37 RequestKey Service Execution Test .296
9.38 Authenticate Service Execution Tests.298
© ISO 2005 – All rights reserved
4

---------------------- Page: 12 ----------------------

SIST EN ISO 16484-6:2006
ISO 16484-6:2005(E)
10. NETWORK LAYER PROTOCOL TESTS.304
10.1 Processing Application Layer Messages Originating from Remote Networks.304
10.2 Router Functionality Tests.304
10.3 Half-Router Functionality Tests.328
10.4 B/IP PAD Tests.336
10.5 Initiating Network Layer Messages .338
11. LOGICAL LINK LAYER PROTOCOL TESTS.340
11.1 UI Command and Response.340
11.2 XID Command and Response.340
11.3 TEST Command and Response .341
12. DATA LINK LAYER PROTOCOLS TESTS.342
12.1 MS/TP State Machine Tests.342
12.2 PTP State Machine Tests .399
13. SPECIAL FUNCTIONALITY TESTS.440
13.1 Segmentation .440
13.2 Time Master.449
13.3 Character Sets .450
13.4 Malformed PDUs.450
14. BACnet/IP Functionality T
...