oSIST prEN 3678:2024

Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa

This document specifies the requirements relating to:
Steel X5CrNiCu17-4 (1.4542)
Air melted
Solution treated and precipitation treated
Forgings
a or D ≤ 200 mm
Rm ≥ 930 MPa
for aerospace applications.
W.nr: 1.4542.

Luft- und Raumfahrt - Stahl X5CrNiCu17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Schmiedestücke - a oder D ≤ 200 mm - Rm ≥ 930 MPa

No Scope available

Série aérospatiale - Acier X5CrNiCu17-4 (1.4542) - Élaboré à l'air - Mis en solution et précipité - Pièces forgées ou matricées - a ou D ≤ 200 mm - Rm ≥ 930 MPa

No Scope available

Aeronavtika - Jeklo X5CrNiCu17-4 (1.4542) - Taljeno - Topilno žarjeno in izločevalno utrjeno - Izkovki - a ali D ≤ 200 mm - Rm ≥ 930 MPa

General Information

• Status: Not Published
• Public Enquiry End Date: 04-Sep-2024
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 20-Jun-2024
• Due Date: 07-Nov-2024
• Ref Project: prEN 3678 - Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa

Relations

• Revised: SIST EN 3678:2009 - Aerospace series - Steel FE-PM3801 (X5CrNiCu17-4) - Air melted - Solution treated and precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3678:2024
01-september-2024
Aeronavtika - Jeklo X5CrNiCu17-4 (1.4542) - Taljeno - Topilno žarjeno in
izločevalno utrjeno - Izkovki - a ali D ≤ 200 mm - Rm ≥ 930 MPa
Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air melted - Solution treated and
precipitation treated - Forgings - a or D ≤ 200 mm - Rm ≥ 930 MPa
Luft- und Raumfahrt - Stahl X5CrNiCu17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht
und ausscheidungsgehärtet - Schmiedestücke - a oder D ≤ 200 mm - Rm ≥ 930 MPa
Série aérospatiale - Acier X5CrNiCu17-4 (1.4542) - Élaboré à l'air - Mis en solution et
précipité - Pièces forgées ou matricées - a ou D ≤ 200 mm - Rm ≥ 930 MPa
Ta slovenski standard je istoveten z: prEN 3678
ICS:
49.025.10 Jekla Steels
oSIST prEN 3678:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3678:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3678:2024


DRAFT
EUROPEAN STANDARD
prEN 3678
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2024
ICS 49.025.10 Will supersede EN 3678:2007
English Version

Aerospace series - Steel X5CrNiCu17-4 (1.4542) - Air
melted - Solution treated and precipitation treated -
Forgings - a or D ≤ 200 mm - R ≥ 930 MPa
m
Série aérospatiale - Acier X5CrNiCu17-4 (1.4542) - Luft- und Raumfahrt - Stahl X5CrNiCu17-4 (1.4542) -
Élaboré à l'air - Mis en solution et précipité - Pièces Lufterschmolzen - Lösungsgeglüht und ausgehärtet -
forgées ou matricées - a ou D ≤ 200 mm - R ≥ 930 MPa Schmiedestücke - a oder D ≤ 200 mm - Rm ≥ 930 MPa
m
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3678:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3678:2024
prEN 3678:2024 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

2

---------------------- Page: 4 ----------------------
oSIST prEN 3678:2024
prEN 3678:2024 (E)
European foreword
This document (prEN 3678:2024) has been prepared by ASD-STAN.
After enquiries and v
...