Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating

This European Standard deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations.

Appareils électrodomestiques et analogues - Sécurité - Partie 2-96: Exigences particulières pour les films souples chauffants pour le chauffage des locaux

Gospodinjski in podobni električni aparati - Varnost - 2-96. del: Posebne zahteve za grelne elemente z zvijavimi ploščami za sobno gretje - Dopolnilo A11

Ta evropski standard obravnava varnost grelnih elementov z zvijavimi ploščami, ki so namenjeni vgradnji v tla in stene na višini manj kot 1,2 m oziroma več kot 2,3 m ter v strope in katerih nazivna napetost ne presega 250 V za enofazne aparate oziroma 480 V za druge aparate.

General Information

Status
Published
Public Enquiry End Date
31-Jan-2021
Publication Date
11-Jan-2022
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
13-Dec-2021
Due Date
17-Feb-2022
Completion Date
12-Jan-2022

Relations

Overview

SIST EN IEC 60335-2-96:2022/A11:2022 is a European Standard developed by the CLC (European Committee for Electrotechnical Standardization) that addresses the safety requirements of flexible sheet heating elements used for room heating in household and similar electrical appliances. This standard applies specifically to flexible sheet heating elements designed to be installed in floors, walls (below 1.2 m and above 2.3 m), and ceilings with a rated voltage not exceeding 250 V for single-phase installations and 480 V for other installations.

This amendment A11 to EN IEC 60335-2-96:2021 updates and supersedes previous versions, reinforcing safety compliance and aligning with the latest technical and regulatory requirements, including those of the Low Voltage Directive 2014/35/EU.

Key Topics

  • Scope and Application
    The standard focuses on the safety of flexible sheet heating elements incorporated into room structures, ensuring they meet precise electrical and mechanical safety criteria.

  • Voltage & Installation Parameters
    Applicable for installations:

    • Rated voltage ≤ 250 V (single-phase)
    • Rated voltage ≤ 480 V (other installations)
    • Installation locations: floors, walls (below 1.2 m and above 2.3 m), and ceilings
  • Safety Compliance
    Requirements are designed to minimize risks such as electric shock, fire hazards, and overheating, ensuring user protection and appliance reliability.

  • Harmonization with EU Directives
    The standard supports compliance with the European Low Voltage Directive (2014/35/EU), providing a presumption of conformity when used with corresponding Part 1 standards.

  • Normative References and Related Standards
    References to related standards such as IEC 60364-7-701 (Low-voltage electrical installations), IEC 60884-1 (Plugs and socket-outlets), and ISO 3864-1 (Graphical safety signs) support holistic safety management.

Applications

SIST EN IEC 60335-2-96:2022/A11:2022 serves as a critical safety benchmark for manufacturers, installers, and regulators involved with:

  • Underfloor Heating Systems
    Ensuring flexible sheet heating elements integrated beneath floors comply with electrical and thermal safety requirements.

  • Wall and Ceiling Heating Panels
    Facilitating the safe use of heating films in walls and ceilings, particularly in residential and commercial buildings.

  • Household and Similar Electrical Appliances
    Supporting the design and deployment of household heating elements that require rigorous safety evaluation before market introduction.

  • Building and Construction Compliance
    Assisting architects and engineers with standards-based integration of heating elements in building designs to meet EU safety legislations.

Related Standards

  • EN IEC 60335-1
    General safety requirements for household and similar electrical appliances; Part 1 complements this standard and must be read in conjunction for full safety compliance.

  • IEC 60364-7-701
    Joint safety standards for special electrical installations or locations such as bathrooms, relevant for installation conditions.

  • IEC 60884-1
    Requirements for plugs and socket-outlets, relevant for appliances power connections.

  • ISO 3864-1
    Provides guidelines for safety signs and markings, aiding in hazard communication for heating appliances.


By adhering to SIST EN IEC 60335-2-96:2022/A11:2022, stakeholders can ensure that flexible sheet heating elements used in room heating applications meet the highest European safety standards, minimizing electrical hazards and promoting user safety. This standard is essential for manufacturers targeting the European market and looking to demonstrate compliance with EU legislation for electrical household appliances.

Amendment
SIST EN IEC 60335-2-96:2022/A11:2022
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Frequently Asked Questions

SIST EN IEC 60335-2-96:2022/A11:2022 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating". This standard covers: This European Standard deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations.

This European Standard deals with the safety of flexible sheet heating elements intended to be incorporated into floors and walls below 1,2 m and above 2,3 m and in ceilings, their rated voltage being not more than 250 V for single-phase installations and 480 V for other installations.

SIST EN IEC 60335-2-96:2022/A11:2022 is classified under the following ICS (International Classification for Standards) categories: 13.120 - Domestic safety; 97.100.10 - Electric heaters. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN IEC 60335-2-96:2022/A11:2022 has the following relationships with other standards: It is inter standard links to SIST EN IEC 60335-2-96:2022. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

SIST EN IEC 60335-2-96:2022/A11:2022 is associated with the following European legislation: EU Directives/Regulations: 2014/35/EU; Standardization Mandates: M/511. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase SIST EN IEC 60335-2-96:2022/A11:2022 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.

Standards Content (Sample)


SLOVENSKI STANDARD
01-februar-2022
Gospodinjski in podobni električni aparati - Varnost - 2-96. del: Posebne zahteve
za grelne elemente z zvijavimi ploščami za sobno gretje - Dopolnilo A11
Household and similar electrical appliances - Safety - Part 2-96: Particular requirements
for flexible sheet heating elements for room heating
Appareils électrodomestiques et analogues - Sécurité - Partie 2-96: Exigences
particulières pour les films souples chauffants pour le chauffage des locaux
Ta slovenski standard je istoveten z: EN IEC 60335-2-96:2021/A11:2021
ICS:
13.120 Varnost na domu Domestic safety
97.100.10 Električni grelniki Electric heaters
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60335-2-
96:2021/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2021
ICS 97.100.10; 13.120
English Version
Household and similar electrical appliances - Safety - Part 2-96:
Particular requirements for flexible sheet heating elements for
room heating
Appareils électrodomestiques et analogues - Sécurité - To be completed
Partie 2-96: Exigences particulières pour les films souples
chauffants pour le chauffage des locaux
This amendment A11 modifies the European Standard EN IEC 60335-2-96:2021; it was approved by CENELEC on 2021-09-20. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-96:2021/A11:2021 E

European Foreword
This document (EN IEC 60335-2-96:2021/A11:2021) has been prepared by CLC/TC 61 "Safety of household
and similar electrical appliances".
The following dates are fixed:
• latest date by which this document has to be (dop) 2022-09-20
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) 2024-09-20
conflicting with this document have to be withdrawn

This document is read in conjunction with EN IEC 60335-2-96:2021.
The numbering system for European clauses, subclasses, notes, tables, figures and annexes that are
additional to those in the IEC standard are prefixed with the letter “Z”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).

For the relationship with EU Directive see informative Annex ZZA, which is an integral part of this document.

FprEN IEC 60335-2-96:2021/FprA11:2021 (E)
TEXT of A11 of EN IEC 60335-2-96

1 Modification to the Introduction
Addition:
Whit this European amendment A11, the standard EN 60335-2-96:2002+A1:20
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...