SIST EN 4702-03:2018

Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking

This European Standard specifies the dimensions, mass, tolerances and static values of stud – quickrelease
and locking for use in fuselage interior equipment and non-structural or secondary structural
area.

Luft- und Raumfahrt - Schnellverschlusssysteme für nicht-strukturelle und Innenausstattungsanwendungen - Teil 03: Bolzen - Schnellauslösend und -schließend

Série aérospatiale - Fixations rapides filetées pour applications non-structurales et revêtements intérieurs - Partie 03: Pion à démontage et à verrouillage rapide

La présente norme européenne décrit les dimensions, les masses, les tolérances et les valeurs statiques des pions à démontage et à verrouillage rapide pour une utilisation dans les équipements à l'intérieur du fuselage et dans les zones non-structurales ou les zones structurales secondaires destinée aux applications aéronautiques.

Aeronavtika - Spončni sistemi za hitro sprostitev za nestrukturno uporabo in notranje obloge - 03. del: Stojni vijak - hitro sproščanje in zapiranje

Ta evropski standard določa dimenzije, maso, tolerance in statične vrednosti stojnega vijaka za hitro sproščanje in zapiranje za uporabo v notranji opremi v trupu letala ter nestrukturnem ali sekundarnem strukturnem območju.

General Information

• Status: Published
• Publication Date: 07-Nov-2017
• ICS: 49.030.20 - Bolts, screws, studs
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 13-Oct-2017
• Due Date: 18-Dec-2017
• Completion Date: 08-Nov-2017
• Ref Project: EN 4702-03:2017 - Aerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LUDQMHLuft- und Raumfahrt - Schnellverschlusssysteme für nicht-strukturelle und Innenausstattungsanwendungen - Teil 03: Bolzen - Schnellauslösend und -schließendSérie aérospatiale - Fixations rapides filetées pour applications non-structurales et revêtements intérieurs - Partie 03: Pion à démontage et à verrouillage rapideAerospace series - Quick release fastening systems for non-structural and lining applications - Part 03: Stud - quick-release and locking49.030.20Sorniki, vijaki, stebelni vijakiBolts, screws, studsICS:Ta slovenski standard je istoveten z:EN 4702-03:2017SIST EN 4702-03:2018en,fr,de01-januar-2018SIST EN 4702-03:2018SLOVENSKI
STANDARD



SIST EN 4702-03:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4702-03
October
t r s y ICS
v {ä r u w English Version
Aerospace series æ Quick release fastening systems for nonæstructural and lining applications æ Part
r uã Stud æ quickærelease and locking Série aérospatiale æ Fixations rapides filetées pour applications nonæstructurales et revêtements intérieurs æ Partie
r u ã Pion à démontage et à verrouillage rapide
Luftæ und Raumfahrt æ Schnellverschlusssysteme für nichtæstrukturelle und Innenausstattungsanwendungen æ Teil
r uã Bolzen æ Schnell auslösend und schließend This European Standard was approved by CEN on
t u July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v y r tæ r uã t r s y ESIST EN 4702-03:2018



EN 4702-03:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Requirements . 5 4 Designation. 9 5 Marking . 9 6 Quality assurance . 9 7 Technical Specification . 10 Annex A (normative)
Material . 11 Bibliography . 13
SIST EN 4702-03:2018



EN 4702-03:2017 (E) 3 European foreword This document (EN 4702-03:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2018, and conflicting national standards shall be withdrawn at the latest by April 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4702-03:2018



EN 4702-03:2017 (E) 4 1 Scope This European Standard specifies the dimensions, mass, tolerances and static values of stud – quick-release and locking for use in fuselage interior equipment and non-structural or secondary structural area. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1934, Thermal performance of buildings — Determination of thermal resistance by hot box method using heat flow meter — Masonry EN 2424, Aerospace series — Marking of aerospace products EN 4710-01, Aerospace series — Quick release fastening systems for non-structural applications — Part 01: Technical specification EN 4702-04, Aerospace series — Quick release fastening systems for non-structural and lining applications — Part 04: Spring clamp EN 22768-1:1993, General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989) EN 22768-2:1993, General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989) EN 62631-3-2, Dielectric and resistive properties of solid insulating materials — Part 3-2: Determination of resistive properties (DC Methods) — Surface resistance and surface resistivity (IEC 62631-3-2) EN ISO 62, Plastics — Determination of water absorption (ISO 62) EN ISO 75-1, Plastics — Determination of temperature of deflection under load — Part 1: General test method (ISO 75-1) EN ISO 75-2, Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite (ISO 75-2) EN ISO 178, Plastics — Determination of flexural properties (ISO 178) EN ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test (ISO 179-1) EN ISO 180, Plastics — Determination of Izod impact strength (ISO 180) EN ISO 307, Plastics — Polyamides — Determination of viscosity number (ISO 307) EN ISO 527-1, Plastics — Determination of tensile properties — Part 1: General principles (ISO 527-1) EN ISO 527-2, Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2) SIST EN 4702-03:2018



EN 4702-03:2017 (E) 5 EN ISO 899-1, Plastics — Determination of creep behaviour — Part 1: Tensile creep (ISO 899-1) EN ISO 1043-1, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics (ISO 1043-1) EN ISO 1133-1, Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method (ISO 1133-1) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1) EN ISO 11357-3, Plastics — Differential scanning calo
...