iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 1040:2001

(Main)

Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)

Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)

This European Standard specifies a test method (phase 1) and the minimum requi- rement for bactericidal activity of chemical disinfectant and antiseptic products that form a homogeneous physically stable preparation in water. The Draft European Standard is applicable to products for use in agricultural (but not crop protection), domestic service, food hygiene and other industrial fields, institutional, medical and veterinary  applications.

Chemische Desinfektionsmittel und Antiseptika - Bakterizide Wirkung (Basistest) - Prüfverfahren und Anforderungen (Phase 1)

Diese Europäische Norm legt ein Prüfverfahren und Mindestanforderungen für die bakterizide Wirkung von chemischen Desinfektionsmitteln und Antiseptikafest, die in Wasser ein homogenes, physikalisch stabiles Präparat ergeben. Diese Europäische Norm gilt für Produkte für die Anwendung in der Landwirtschaft (ausser Getreideschutz), im Haushalt, in der Lebensmittet- hygiene und anderen Industriezweigen, in öffentlichen Einrichtungen, in der Human- und der Veterinärmedizin.

Antiseptiques et désinfectants chimiques - Activité bactéricide de base - Méthode d'essai et prescriptions (phase 1)

La présente norme européenn décrit une méthode d'essai (phase 1) et prescriptionminimales d'activité bactéricide des antiseptiques et désinfectants chimiques formant une préparation homogene physiquement stable dans l'eau. Le projet de norme européenne est applicable aux produits destinés a etre utilisés en agriculture (mais pas pour la protection des cultures), en usage domestique, en hygiene alimentaire et autres domaines industriels, en collectivité et pour les applications médicales et vétérinaires.

Kemična razkužila in antiseptiki - Osnovno baktericidno delovanje - Preskusna metoda in zahteve (faza 1)

General Information

Status
Withdrawn
Publication Date
31-Jan-2001
Withdrawal Date
31-May-2006
ICS
11.080.20 - Disinfectants and antiseptics
71.100.35 - Chemicals for industrial and domestic disinfection purposes
Technical Committee
KDS - Cosmetics, chemical disinfectants and surface active agents
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jun-2006
Due Date
01-Jun-2006
Completion Date
01-Jun-2006
Ref Project
EN 1040:1997 - Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)

Relations

Replaced By
SIST EN 1040:2006 - Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)
Effective Date
01-Jun-2006

Buy Standard

EN 1040:2001EN 1040:2001
PreviousNext
Standard
EN 1040:2001
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Chemische Desinfektionsmittel und Antiseptika - Bakterizide Wirkung (Basistest) - Prüfverfahren und Anforderungen (Phase 1)Antiseptiques et désinfectants chimiques - Activité bactéricide de base - Méthode d'essai et prescriptions (phase 1)Chemical disinfectants and antiseptics - Basic bactericidal activity - Test method and requirements (phase 1)71.100.35Kemikalije za dezinfekcijo v industriji in domaChemicals for industrial and domestic disinfection purposes11.080.20Dezinfektanti in antiseptikiDisinfectants and antisepticsICS:Ta slovenski standard je istoveten z:EN 1040:1997SIST EN 1040:2001en01-februar-2001SI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 14885:2022/AC:2023(Corrigendum)
Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics
EN 14885:2022/AC:2023
  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16616:2022(Main)
Chemical disinfectants and antiseptics - Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2)
EN 16616:2022

This document specifies a test method and the minimum requirements for the microbicidal activity of a defined disinfection process for the treatment of contaminated textile. This procedure is carried out by using a washing machine as defined in 5.3.2.18 and refers to the disinfection step without prewash. This procedure is not limited to certain types of textile. The suppliers instructions shall be sufficient to allow the method in the standard to be carried out fully (e.g. dosing disinfectant in whatever washing phase e.g. main wash, rinsing, disinfecting at 40 °C). This document applies to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: — in hospitals, in community medical facilities, and in dental institutions; — in clinics of schools, of kindergartens, and of nursing homes; and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients. The method described is intended to determine the activity of a product or product combination under the conditions in which they are used. This is a phase 2, step 2 laboratory test that simulates the conditions of application of the product. NOTE This method corresponds to a phase 2, step 2 test (see EN 14885). EN 14885 specifies in detail the relationship of the various tests to one another and to “use recommendations”.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 14885:2022(Main)
Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics
EN 14885:2022

This European Standard specifies the European Standards to which products have to conform in order to support the claims for microbicidal activity which are referred to in this European Standard.
This European Standard also specifies terms and definitions which are used in European Standards.
It is applicable to products for which activity is claimed against the following microorganisms: vegetative bacteria (including mycobacteria and Legionella), bacterial spores, yeasts, fungal spores and viruses (including bacteriophages).
It is intended to:
a)   enable manufacturers of products to select the appropriate standards to be used in order to provide data which support their claims for a specific product;
b)   enable users of the product to assess the information provided by the manufacturer in relation to the use for which they intend to use the product;
c)   assist regulatory authorities in assessing claims made by the manufacturer or by the person responsible for placing the product on the market.
It is applicable to products to be used in the area of human medicine, the veterinary area and in food, industrial, domestic and institutional areas.
In the area of human medicine (Working Group 1, i. e. WG 1), it is applicable to chemical disinfectants and antiseptics to be used in areas and situations where disinfection or antisepsis is medically indicated. Such indications occur in patient care
—   in hospitals, in community medical facilities and dental institutions,
—   in clinics of schools, of kindergartens and of nursing homes,
—   and may also occur in the workplace and in the home. It may also include services such as in laundries and kitchens supplying products directly for the patient.
In the veterinary area (WG 2) it is applicable to chemical disinfectants and antiseptics to be used in the areas of breeding, husbandry, veterinary care facilities, production, transport and disposal of animals. It is not applicable to chemical disinfectants used in the food chain following death and entry to the processing industry.
In food, industrial, domestic and institutional areas (WG 3) it is applicable to chemical disinfectants and antiseptics to be used in processing, distribution and retailing of food of animal or vegetable origin. It is also applicable to products for all public areas where disinfection is not medically indicated (homes, catering, schools, nurseries, transports, hotels, offices etc.) and products used in packaging, biotechnology, pharmaceutical, cosmetic etc. industries.
This European Standard is also applicable to active substances and products under development for which no area of application has yet been specified.
This standard will be periodically updated to reflect the current published versions of each standard developed in CEN/TC 216. Independent of this update newly published standards should be used, even if they are not yet mentioned in EN 14885.
This European Standard does not refer to methods for testing the toxicological and ecotoxicological properties of products or active substances.

  • Standard
    72 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17272:2020(Main)
Chemical disinfectants and antiseptics - Methods of airborne room disinfection by automated process - Determination of bactericidal, mycobactericidal, sporicidal, fungicidal, yeasticidal, virucidal and phagocidal activities
EN 17272:2020

The method described herein is designed to determine the disinfectant activity of processes used in hospital, medical, pharmaceutical and cosmetics, veterinary, industrial and food processing areas.
The product trialled is designed to be diffused as gaseous molecules or solid or liquid-form dispersants.
NOTE Concerning automatic disinfectant processes:
the limits to use, especially in terms of ability to diffuse throughout the room (min and max effective volumes), shall be specified and stated in the test report;
certain automatic disinfection processes are only suitable for use in large-volume spaces well in excess of 150 m3.
Under these conditions, the systems cannot be tested in indoor spaces less than 150 m3 due to the high power of the jet spray; "additional experimental conditions" (see 5.5.1.1.f) should therefore be used and the tests should only be performed in test rooms with volumes different to the obligatory conditions.

  • Standard
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    64 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13697:2015+A1:2019(Main)
Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2)
EN 13697:2015+A1:2019

This European Standard specifies a test method (phase 2/step 2) and the minimum requirements for bactericidal and/or fungicidal or yeasticidal activity of chemical disinfectants that form a homogeneous physically stable preparation in hard water or – in the case of ready-to-use products – with water in food, industrial, domestic and institutional areas, excluding areas and situations where disinfection is medically indicated and excluding products used on living tissues.
The scope of this European Standard applies at least to the following:
a)   Processing, distribution and retailing of:
1)   Food of animal origin:
i)   milk and milk products;
ii)   meat and meat products;
iii)   fish, seafood and products;
iv)   eggs and egg products;
v)   animal feeds;
vi)   etc.
2)   Food of vegetable origin:
i)   beverages;
ii)   fruits, vegetables and derivatives (including sugar distillery);
iii)   flour, milling and backing;
iv)   animal feeds;
v)   etc.
b)   Institutional and domestic areas:
1)   catering establishments;
2)   public areas;
3)   public transports;
4)   schools;
5)   nurseries;
6)   shops;
7)   sports rooms;
8)   waste container (bins);
9)   hotels;
10)   dwellings;
11)   clinically non sensitive areas of hospitals;
12)   offices;
13)   etc.
c)   Other industrial areas:
1)   packaging material;
2)   biotechnology (yeast, proteins, enzymes...);
3)   pharmaceutical;
4)   cosmetics and toiletries;
5)   textiles;
6)   space industry, computer industry;
7)   etc.
Using this European Standard, it is possible to determine the bactericidal or fungicidal or yeasticidal activity of the undiluted product. As three concentrations are tested, in the active to non active range, dilution of the product is required and, therefore, the product forms a homogeneous stable preparation in hard water.
EN 14885 specifies in detail the relationship of the various tests to one another and to use recommendations.
NOTE 1   The method described is intended to determine the activity of commercial formulations or active substances on bacteria and/or fungi in the conditions in which they are used.
NOTE 2   This method cannot be used to evaluate the activity of products against mycobacteria.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17126:2019(Main)
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of sporicidal activity of chemical disinfectants in the medical area - Test method and requirements (phase 2, step 1)
EN 17126:2018

This European Standard specifies a test method and the minimum requirements for sporicidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with hard water, or - in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less (97 % with a modified method for special cases) as some dilution is always produced by adding the test organisms and interfering substance.
This European Standard applies to products that are used in the medical area in the fields of instrument disinfection by immersion, and surface disinfection by wiping, spraying, flooding or other means.
This European Standard applies to areas and situations where disinfection or antisepsis is medically indicated. Such indications occur in patient care, for example:
   in hospitals, in community medical facilities and in dental institutions;
   in clinics of schools, of kindergartens and of nursing homes;
and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients.
NOTE 1   The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used.
NOTE 2   This method corresponds to a phase 2 step 1 test.
EN 14885 specifies in detail the relationship of the various tests to one another and to “use recommendations”.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1499:2013(Main)
Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2)
EN 1499:2013

This European Standard specifies a test method simulating practical conditions for establishing whether a product for hygienic handwash reduces the release of transient microbial flora on hands when used to wash the artificially contaminated hands of volunteers. NOTE 1 Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in certain European countries/regions. This European Standard applies to products for hygienic handwash for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: - in hospitals, in community medical facilities and in dental institutions; - in clinics of schools, of kindergardens and of nursing homes. and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient. EN 14885 specifies in detail the relationship of the various tests to one another and to "use recommendations". NOTE 2 This method corresponds to a phase 2, step 2 test.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1500:2013(Main)
Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2)
EN 1500:2013

This European Standard specifies a test method simulating practical conditions for establishing whether a product for hygienic handrub reduces the release of transient microbial flora on hands when rubbed onto the artificially contaminated hands of volunteers. NOTE 1 Attention is drawn to the fact that tests on human volunteers are the subject of legal provisions in certain European countries/regions. This European Standard applies to products for hygienic handrub for use in areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example:
- in hospitals, in community medical facilities and in dental institutions,
- in clinics of schools, of kindergartens and of nursing homes;
and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patient. EN 14885 specifies in detail the relationship of the various tests to one another and to “use recommendations”. NOTE 2 This method corresponds to a phase 2, step 2 test.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1275:2006(Main)
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic fungicidal or basic yeasticidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)
EN 1275:2005

This European Standard specifies a test method and the minimum requirements for basic fungicidal or basic yeasticidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with water. Products can only be tested at a concentration of 80 percent or less as some dilution is always produced by adding the test organisms and water.
This European Standard applies to active substances (antifungal biocides) and to formulations under development that are planned to be used in food, industrial, domestic and institutional, medical and veterinary areas. It applies also to the evaluation of fungicidal or yeasticidal activity of chemical antiseptics and disinfectants when appropriate European Standards are not available.
NOTE 1   This European Standard does not evaluate the activity of a product for an intended use.
NOTE 2   This method corresponds to a phase 1 test (Annex F).

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1040:2006(Main)
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of basic bactericidal activity of chemical disinfectants and antiseptics - Test method and requirements (phase 1)
EN 1040:2005

This European Standard specifies a test method and the minimum requirements for basic bactericidal activity of chemical disinfectant and antiseptic products that form a homogeneous, physically stable preparation when diluted with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and water.
This European Standard applies to active substances (antibacterial biocides) and to formulations under development that are planned to be used in food, industrial, domestic and institutional, medical and veterinary areas. It applies also to the evaluation of bactericidal activity of chemical antiseptics and disinfectants when appropriate standards are not available.
NOTE 1   This European Standard does not evaluate the activity of a product for an intended use.
NOTE 2   This method corresponds to a phase 1 test (Annex F).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day