SIST EN 33:2011
(Main)WC pans and WC suites - Connecting dimensions
WC pans and WC suites - Connecting dimensions
This European Standard specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture. This standard does not apply to siphonic action WC pans and WC suites.
WC-Becken und WC-Anlagen - Anschlussmaße
Diese Europäische Norm legt Anschlussmaße für WC-Becken und WC-Anlagen, unabhängig vom für ihre Herstellung verwendeten Werkstoff, fest.
Diese Norm gilt nicht für Absauge-WCs und -WC-Anlagen.
ANMERKUNG Nur die angegebenen Maße sind verbindlich. Die in den Bildern dargestellte Form der Gegenstände wurde nur für das bessere Verständnis gewählt; sie schreibt nicht die endgültige Form der Gegenstände vor, die der Wahl des Herstellers überlassen bleibt.
Cuvettes de WC et cuvettes à réservoir attenant - Cotes de raccordement
La présente Norme européenne spécifie les caractéristiques de raccordement des cuvettes de WC et des cuvettes à réservoir attenant, quels que soient les matériaux entrant dans leur fabrication.
Elle n'a pas trait aux cuvettes à aspiration siphonique.
NOTE Seules les dimensions des parties cotées doivent être respectées. La forme schématique des appareils est donnée pour faciliter la compréhension ; elle ne préjuge en rien de la forme définitive de l'appareil qui est laissée à l'initiative des fabricants.
WC školjke in WC naprave - Priključne mere
Ta evropski standard določa priključne mere WC školjk in WC naprav, ne glede na uporabljene materiale za njihovo izdelavo. Ta standard ne velja za WC školjke in WC naprave s sifonskim delovanjem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WC-Becken und WC-Anlagen - AnschlussmaßeCuvettes de WC et cuvettes à réservoir attenant - Cotes de raccordementWC pans and WC suites - Connecting dimensions91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 33:2011SIST EN 33:2011en,fr,de01-november-2011SIST EN 33:2011SLOVENSKI
STANDARDSIST EN 37:2000SIST EN 38:1998SIST EN 34:1998SIST EN 33:2003SIST EN 33:2003/AC:20051DGRPHãþD
SIST EN 33:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 33
September 2011 ICS 91.140.70 Supersedes EN 33:2003, EN 34:1992, EN 37:1998, EN 38:1992English Version
WC pans and WC suites - Connecting dimensions
Cuvettes de WC à alimentation indépendante et cuvettes de WC à réservoir attenant - Cotes de raccordement
WC-Becken und WC-Anlagen - Anschlussmaße This European Standard was approved by CEN on 29 July 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 33:2011: ESIST EN 33:2011
EN 33:2011 (E) 2 Contents Page Foreword .31 Scope .42 Connecting dimensions .42.1 Inlet of WC pans with independent water supply .42.2 Outlets of WC pans and WC suites .63 Fixing dimensions for wall-hung WC pans and WC suites . 104 Fixing dimensions for the seat . 11 SIST EN 33:2011
EN 33:2011 (E) 3 Foreword This document (EN 33:2011) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2012, and conflicting national standards shall be withdrawn at the latest by March 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 33:2003, EN 34:1992, EN 37:1998, EN 38:1992. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 33:2011
EN 33:2011 (E) 4 1 Scope This European Standard specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture. This European Standard does not apply to siphonic action WC pans and WC suites. NOTE 1 Other connecting dimensions are permitted, e. g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings. NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer. 2 Connecting dimensions 2.1 Inlet of WC pans with independent water supply The connecting dimensions of inlets of WC pans with independent water supply shall comply with the dimensions given in Tables 1,and 2. Table 1 — Inlet dimensions Designation Symbol
Dimensions mm Figure Internal diameter of inlet measured over the initial 25 mm of e1
d1 5531+−
Depth of the internal cylindrical part in front of the shoulder
e1 ≥
25 SIST EN 33:2011
EN 33:2011 (E) 5 Table 2 — Position of inlets inside the WC pans Designation Symbol
Dimensions mm Fi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.