SIST EN 13384-1:2015/oprA1:2018

Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance

This European Standard specifies methods for the calculation of the thermal and fluid dynamic characteristics of chimneys serving one heating appliance.
The methods in this part of this European Standard are applicable to negative or positive pressure chimneys with wet or dry operating conditions. It is valid for chimneys with heating appliances for fuels subject to the knowledge of the flue gas characteristics which are needed for the calculation.
The methods in this part of this European Standard are applicable to chimneys with one inlet connected with one appliance. The methods in Part 2 of this European Standard are applicable to chimneys with multiple inlets and one inlet with multiple appliances. Part 3 describes methods for the development of diagrams and tables for chimneys serving one heating appliance.

Abgasanlagen - Wärme- und strömungstechnische Berechnungsverfahren - Teil 1: Abgasanlagen mit einer Feuerstätte

Conduits de fumée - Méthodes de calcul thermo-aéraulique - Partie 1: Conduits de fumée ne desservant qu'un seul appareil

Dimniki - Računske metode termodinamike in dinamike fluidov - 1. del: Dimniki za eno ogrevalno napravo

General Information

• Status: Not Published
• Public Enquiry End Date: 19-Dec-2018
• ICS: 91.060.40 - Chimneys, shafts, ducts
• Technical Committee: POZ - Požarna varnost
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 16-Jul-2019
• Due Date: 21-Jul-2019
• Completion Date: 16-Jul-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/105 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on chimneys, flues and specific products
• Ref Project: EN 13384-1:2015/prA1 - Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance

Relations

• Consolidated By: SIST EN 13384-1:2015+A1:2019 - Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
• Effective Date: 18-Jan-2023
• Amends: SIST EN 13384-1:2015 - Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
• Effective Date: 01-Dec-2018
• Consolidated By: SIST EN 13384-1:2015+A1:2019 - Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13384-1:2015/oprA1:2018
01-december-2018
'LPQLNL5DþXQVNHPHWRGHWHUPRGLQDPLNHLQGLQDPLNHIOXLGRYGHO'LPQLNL]D
HQRRJUHYDOQRQDSUDYR
Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving
one heating appliance
Abgasanlagen - Wärme- und strömungstechnische Berechnungsverfahren - Teil 1:
Abgasanlagen mit einer Feuerstätte
Conduits de fumée - Méthodes de calcul thermo-aéraulique - Partie 1: Conduits de
fumée ne desservant qu'un seul appareil
Ta slovenski standard je istoveten z: EN 13384-1:2015/prA1
ICS:
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
SIST EN 13384-1:2015/oprA1:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13384-1:2015/oprA1:2018

---------------------- Page: 2 ----------------------

SIST EN 13384-1:2015/oprA1:2018


DRAFT
EUROPEAN STANDARD
EN 13384-1:2015
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2018
ICS 91.060.40
English Version

Chimneys - Thermal and fluid dynamic calculation
methods - Part 1: Chimneys serving one heating appliance
Conduits de fumée - Méthodes de calcul thermo- Abgasanlagen - Wärme- und strömungstechnische
aéraulique - Partie 1: Conduits de fumée ne desservant Berechnungsverfahren - Teil 1: Abgasanlagen mit einer
qu'un seul appareil Feuerstätte
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 166.

This draft amendment A1, if approved, will modify the European Standard EN 13384-1:2015. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13384-1:2015/prA1:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13384-1:2015/oprA1:2018
EN 13384-1:2015/prA1:2018 (E)
Contents Page
European foreword . 3
1 Modification to 1, 3, 4, 5, 6, 7, 8, 9 and Annex B . 4
2 Modification to 5.5.2 . 4
3 Modification to 5.11.4 . 5
4 Modification to 6.4.1 . 5
5 Modification to 7 . 6
6 Modification to Annex B, Table B.1 . 7
7 Modification to Annex B, Table B.8 .12

2

---------------------- Page: 4 ----------------------

SIST EN 13384-1:2015/oprA1:2018
EN 13384-1:2015/prA1:2018 (E)
European foreword
This document (EN 13384-1:2015/prA1:2018) has been prepared by Technical Committee CEN/TC 166
“Chimneys”, the secretariat of which is held by ASI.
3

---------------------- Page: 5 ----------------------

SIST EN 13384-1:2015/oprA1:2018
EN 13384-1:2015/prA1:2018 (E)
1 Modification to 1, 3, 4, 5, 6, 7, 8, 9 and Annex B
Replace
“heating appliance”
By
“combustion appliance”.
2 Modification to 5.5.2
Replace Clause 5.5.2 with the following text:
"5.5.2 Flue gas mass flow and combustion air mass flow
5.5.2.1 Flue gas mass flow and combustion air mass flow at nominal heat output of the
combustion appliance
For the calculation of pressure and temperature values according to relationships of Formulae (1), (2),
(2a), (3), (4), (5), (5a) and (6) the flue gas mass flow and combustion air mass flow at nominal heat output
conditions for the combustion appliance shall be obtained.
If the data are not available the flue gas mass flow, combustion air mass flow and the volume
concentration of CO can be determined from the formulas in Tables B.1, B.2 or B.3.
2
If the chimney is connected to a multi-fuel combustion appliance the calculation and dimensioning should
be carried out by considering all the fuels suited to the appliance.
In the case of combustion appliances with a draught diverter the flue gas mass flow downstream of the
draught diverter shall be used.
 
The flue gas mass flow and combustion air mass flow of an open fire place depends on its opening.
m m
B
For the calculation use the following formula:

m = f ⋅ A , in kg/s (8)
mf F

mm= , in kg/s (8a)
B
where
f 2
mf is the mass flow factor of an open fire place, in kg/(s·m );
A 2;
F is the cross section of the opening of the open fire place, in m
2
For open fire places with an opening height less than or equal its width f = 0,139 kg/(s·m ).
mf
2
For open fire places with an opening height greater than its width f = 0,167 kg/(s·m ).
mf
The CO -content of the flue gas for open fire places may be taken as σ(CO ) = 1 %.
2 2
5.5.2.2 Flue gas mass flow and combustion air mass flow at the lowest permissible heat output
If the combustion appliance is designed to operate under modulating conditions an additional check shall
be conducted for the pressure and temperature requirement of the flue gas mass flow and combustion
air mass flow at the lowest possible and permissible heat output of the combustion appliance. If the
manufacturer does not provide flue gas data and combustion air mass data for the lowest heat output use
a mass flow of one third of the flue gas mass flow and combustion air mass flow at nominal heat output.
4

---------------------- Page: 6 ----------------------

SIST EN 13384-1:2015/oprA1:2018
EN 13384-1:2015/prA1:2018 (E)
5.5.2.3 Flue gas mass flow and combustion air mass flow at the maximum draught or minimum
differential pressure of the combustion appliances
For the calculation of maximum draught or minimum positive pressure in a chimney the flue gas mass
flow and combustion air mass flow at maximum draught or minimum differential pressure of the
combustion appliance shall be obtained from the manufacturer of the combustion appliance if
appropriate.
5.5.2.4 Flue gas mass flow with secondary air
If secondary air is supplied by a draught regulator or draught diverter the air flow shall be calculated
according to 6.3 depending on the actual difference of the pressure in the room of installation of the
combustion appliance and the chimney or connecting flue pipe."
3 Modification to 5.11.4
Replace Formula (43) with the following:

m
B
w = , in m/s (43)
B
A ⋅ρ
BB
where
A 2
B is the cross-section of the combustion air pipe, in m ;

is the combustion air mass flow, in kg/s;
m
B
ρ 3
B is the density o
...