This European Standard specifies requirements and test methods for rain caps that are used as components, subject to flue gas, in order to prevent rain entry into the chimneys. Rain caps already tested together with system chimney products or other chimney components, e.g. terminals, are not covered by this standard. Rain caps incorporating a bird guard are also included. It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

    • sale 10% off
    • Standard
      28 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The standard is limited to access components with a door opening area up to 0,27 m2.
Products not freely ventilated are excluded from thi...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the requirements and test methods for flue dampers that are used as
components, carrying flue gas, in order to limit the flow in a chimney.
Flue dampers may be manually adjusted, sited in connecting flue pipes or chimneys, in order to reduce the burning rate (solid fuel stoves/fireplaces) or to work as a shut-off slide preventing back flow of soot during cleaning of the chimney, or mechanically driven for reducing/closing the flue, in order to reduce the Stand-...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day

This document specifies the characteristics and test methods for flue dampers that are used as components, carrying flue gas, in order to limit the flow in a chimney or to prevent back flow of soot during cleaning of the chimney or to prevent the backflow of the flue gas e.g. in case of multi-served chimneys.
This document covers only flue dampers incorporated in a housing and installed inside a building.
This document covers only flue dampers with sealings made of elastomeric materials for te...
view more

    • sale 10% off
    • Standard
      42 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      46 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for flue gas silencers made of metal that are used as accessories in order to reduce the noise level of combustions appliances.
The standard covers silencers in the connecting flue pipes and on top of chimneys.
This standard does not cover silencers installed as chimney sections. This standard excludes active silencers.

    • sale 10% off
    • Standard
      29 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      29 pages
      English language
    • e-Library read for
      1 day

This document specifies the requirements and test methods for access components comprising a frame and a door or doors which provide access to the flue of a chimney for the purpose of inspection or cleaning.
Access components for higher nominal working temperature than 450 °C, positive pressure and wet applications are not covered by this standard.
The document is limited to access components with door opening dimensions with a maximum width of 450 mm and a maximum height of 600 mm.
Products ...
view more

    • sale 10% off
    • Standard
      33 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Draft
      35 pages
      English language
    • e-Library read for
      1 day

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance.
This part of EN 13384 covers both the cases, either
a)   where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement; or
b)   where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement.
The ca...
view more

    • sale 10% off
    • Standard
      77 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies methods for the calculation of the thermal and fluid dynamic characteristics of chimneys serving one heating appliance.
The methods in this part of this European Standard are applicable to negative or positive pressure chimneys with wet or dry operating conditions. It is valid for chimneys with heating appliances for fuels subject to the knowledge of the flue gas characteristics which are needed for the calculation.
The methods in this part of this European Sta...
view more

    • sale 10% off
    • Standard
      105 pages
      English language
    • e-Library read for
      1 day

This part of EN 13384 specifies methods for calculation of the thermal and fluid dynamic characteristics of chimneys serving more than one heating appliance.
This part of EN 13384 covers both the cases, either
a)   where the chimney is connected with more than one connecting flue pipe from individual or several appliances in a multi-inlet arrangement; or
b)   where the chimney is connected with an individual connecting flue pipe connecting more than one appliance in a cascade arrangement.
The ca...
view more

    • sale 10% off
    • Standard
      77 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies methods for the calculation of the thermal and fluid dynamic characteristics of chimneys serving one heating appliance.
The methods in this part of this European Standard are applicable to negative or positive pressure chimneys with wet or dry operating conditions. It is valid for chimneys with heating appliances for fuels subject to the knowledge of the flue gas characteristics which are needed for the calculation.
The methods in this part of this European Sta...
view more

    • sale 10% off
    • Standard
      105 pages
      English language
    • e-Library read for
      1 day

This draft European Standard specifies requirements and the basic performance criteria for chimneys, flue liners, connecting flue pipes, fittings and accessories, used to convey the products of combustion from combustion appliances to the outside atmosphere. This draft European Standard is to be used as a reference for all product standards of CEN/TC 166.
This draft European Standard specifies sootfire resistant chimneys, flue liners, connecting flue pipes, fittings and accessories for combusti...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This document specifies material-independent general test methods for all system chimneys.
The thermal performance tests for the determination of the distance to combustible material in this standard apply only to chimney sections.
NOTE   The thermal performance tests for the determination of the distance to combustible material for accessories (draught regulators, inspection doors, etc.) are included in different standards of CEN/TC 166.

    • sale 10% off
    • Standard
      82 pages
      English language
    • e-Library read for
      1 day

This document specifies material-independent general test methods for all system chimneys. It can be used for all flue gas carrying products.
NOTE   The thermal performance tests for the determination of the distance to combustible material for accessories (draught regulators, access components, etc.) are included in different standards of CEN/TC 166.

    • sale 10% off
    • Standard
      82 pages
      English language
    • e-Library read for
      1 day

This document specifies requirements and the basic performance criteria for chimneys, flue liners, connecting flue pipes, components and accessories used to convey the products of combustion from combustion appliances to the outside atmosphere. This document is to be used as a reference for all product standards of CEN/TC 166.
This document specifies sootfire resistant chimneys, flue liners, connecting flue pipes, fittings and accessories for combustion appliances burning solid, liquid and gase...
view more

    • sale 10% off
    • Standard
      45 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the requirements and test methods for draught regulators and standstill opening devices that are used as components, carrying flue gases, in order to limit the draught in chimneys and provide secondary air to the chimney.
Draught regulators and standstill opening devices for positive pressure chimneys are not covered by this standard.
It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the requirements and test methods for draught regulators and standstill opening devices that are used as components, carrying flue gases, in order to limit the draught in chimneys and provide secondary air to the chimney.
Draught regulators and standstill opening devices for positive pressure chimneys are not covered by this standard.
It also specifies the requirements for marking, manufacturers’ instruction, product information and evaluation of conformity.

    • sale 10% off
    • Standard
      41 pages
      English language
    • e-Library read for
      1 day

This European standard specifies the requirements and test methods for electrically driven exhaust fans that are used as components to assist the evacuation of products of combustion from the chimney. It covers exhaust fans mounted on the top of the chimney, as a part of the chimney or between appliance and chimney.

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials, dimensional and performance requirements for straight concrete system chimneys for balanced flue applications comprising a concrete flue liner and a combustion air supply duct, and a combination of compatible chimney components, which may be concrete flue blocks (see clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
The standard does not apply to concrete system chimneys with back ven...
view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials, dimensional and performance requirements for straight concrete system chimneys for balanced flue applications comprising a concrete flue liner and a combustion air supply duct, and a combination of compatible chimney components, which may be concrete flue blocks (see Clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
The European Standard does not apply to concrete system chimneys with...
view more

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard covers electrically operated metal fans for chimneys that are able to create a stable positive or negative pressure for the chimney.
This European Standard covers fans installed inline in the connecting flue pipe (inline fans) or mounted on the chimney outlet (exhaust fans).
This standard excludes chimney cowls (Terminals with aerodynamic characteristics).

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials, dimensional and performance requirements for straight concrete system chimneys for non-balanced flue applications comprising a concrete flue liner and a combination of compatible chimney components, which may be concrete flue blocks (see clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
The standard does not apply to concrete system chimneys with back ventilation.
This standard does ...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials and the dimensional and performance requirements for straight concrete system chimneys for non-balanced flue applications comprising a concrete flue liner and a combination of compatible chimney components, which may be concrete flue blocks (see Clause 4), obtained or specified from one manufacturing source with product responsibility for the whole chimney.
This European Standard does not apply to concrete system chimneys with back ventilation.
Th...
view more

    • sale 10% off
    • Standard
      58 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the performance requirements and test methods for system chimneys with plastic flue liners used to convey the products of combustion from appliances to the outside atmosphere under dry and wet conditions. It also specifies the requirements for marking, manufacturer's instructions and evaluation of conformity.
This European Standard describes chimney components from which system chimneys can be assembled.
This European Standard is not applicable to chimneys with...
view more

    • sale 10% off
    • Standard
      96 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the performance requirements and test methods for system chimneys with plastic flue liners used to convey the products of combustion from appliances to the outside atmosphere under dry and wet conditions. It also specifies the requirements for marking, manufacturer's instructions and evaluation of conformity.
This European Standard describes chimney components from which system chimneys can be assembled.
This European Standard is not applicable to chimneys with...
view more

    • sale 10% off
    • Standard
      96 pages
      English language
    • e-Library read for
      1 day

This European Standard describes test methods for metal chimney products.

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

La présente Norme européenne spécifie les méthodes d’essai des composants de conduits de fumée métalliques.

    • sale 10% off
    • Standard
      48 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with steel products for single wall steel chimneys and liners which are produced either in series or as single items. It is a product standard which specifies the performance requirements of cylindrical steel fabrications for use in single wall steel chimneys and steel liners for free-standing chimneys used to convey the flue gas to the outside atmosphere. It also specifies the requirements for insulation and cladding being part of the single wall steel chimney and l...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This European Standard deals with steel products for single wall steel chimneys and liners which are produced either in series or as single items. It is a product standard which specifies the performance requirements of cylindrical steel fabrications for use in single wall steel chimneys and steel liners for free-standing chimneys used to convey the flue gas to the outside atmosphere. It also specifies the requirements for insulation and cladding being part of the single wall steel chimney and l...view more

    • sale 10% off
    • Standard
      24 pages
      English language
    • e-Library read for
      1 day

This European standard is a product standard for clay/ceramic flue liners operating under dry conditions with solid walls or walls with vertical perforations for use in the construction of multiwall chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the outside atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This sta...view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European standard is a product standard for clay/ceramic flue liners operating under wet conditions with solid walls or walls with vertical perforations for use in the construction of multiwall chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the outside atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This sta...view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard is a product standard for clay/ceramic flue liners operating under wet conditions with solid walls or walls with vertical perforations for use in the construction of multiwall chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the outside atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This Eur...view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard is a product standard for clay/ceramic flue liners operating under dry conditions with solid walls or walls with vertical perforations for use in the construction of multiwall chimneys and flue pipes which serve to convey products of combustion from fireplaces or heating appliances to the outside atmosphere by negative or positive pressure. It includes the flue liners used for domestic and industrial chimneys which are not structurally independent (free-standing). This Eur...view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing...
view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the material, dimensional and performance requirements for factory made concrete outer wall elements for chimneys including outer wall fittings.
The standard covers elements having up to four passages designated to accommodate a combination of flue liners and or air ducts.
This European Standard also relates to storey-height and reinforced outer wall elements.
This standard does not apply to structurally independent (freestanding or self-supporting) chimneys c...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the materials, dimensional and performance requirements for precast concrete flue blocks as defined in Clause 3 for use in chimneys. The flue blocks may be of single wall or multi wall construction. The standard does not apply to flue blocks with back ventilation.
This standard does not cover products designated wet (W) in conjunction with corrosion class 3.
The standard also specifies a type of flue block to dimensionally co-ordinate with masonry unit coursing...
view more

    • sale 10% off
    • Standard
      55 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the material, dimensional and performance requirements for factory made precast concrete outer wall elements for chimneys including outer wall fittings.
This European Standard covers elements having up to four passages designated to accommodate a combination of flue liners and/or ventilation passages.
This European Standard also relates to storey-height and reinforced outer wall elements.
This European Standard does not apply to structurally independent (frees...
view more

    • sale 10% off
    • Standard
      34 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys. This document does not cover: - high positive pressure (H) designated products; - products designated wet (W) in conjunction with corrosion class 3. This document also applies to storey-height and flue liners reinforced only for handling.

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the material, dimensional and performance requirements, including methods of test, for precast concrete flue liners and fittings with or without insulation for the construction of multi-wall chimneys.
This document does not cover:
-   high positive pressure (H) designated products;
-   products designated wet (W) in conjunction with corrosion class 3.
This document also applies to storey-height and flue liners reinforced only for handling.
NOTE 1   Any reference t...
view more

    • sale 10% off
    • Standard
      49 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for rigid or flexible metal flue liners, rigid metal connecting flue pipes and their fittings used to convey the products of combustion from appliances to the outside atmosphere (including their supports).
Vitreous enamelled connecting flue pipes are also covered by this document.
Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners of custom built chimneys.
Flexible metal flue li...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the performance requirements for single and multi-wall system chimney products with rigid metallic liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity.

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the performance requirements for single- and multi-wall system chimney products with rigid metallic liners (chimney sections, chimney fittings and terminals, including supports) with nominal diameter up to and including 1200 mm, used to convey the products of combustion from appliances to the outside atmosphere. It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity. Metal liners and metal con...view more

    • sale 10% off
    • Standard
      61 pages
      English language
    • e-Library read for
      1 day

This document specifies the performance requirements for rigid or flexible metal flue liners, rigid metal
connecting flue pipes and their fittings used to convey the products of combustion from appliances to the
outside atmosphere (including their supports).
Vitreous enamelled connecting flue pipes are also covered by this document.
Rigid flue liners can be used as flue liners for renovation or adaptation of existing chimneys and as flue liners
of custom built chimneys.
Flexible metal flue...
view more

    • sale 10% off
    • Standard
      43 pages
      English language
    • e-Library read for
      1 day

This product standard specifies the requirements and test methods for dry (designated D) and/or wet (designated W) air flue system chimneys, including terminals in which the products of combustion are carried into the atmosphere through clay/ceramic flue liners and combustion air is carried into suitable room-sealed appliances through an air duct or an air gap.
It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity.
This st...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for Flues and Air Supply Ducts for C6- type gas appliances.
This standard contains requirements for dimensions, materials and test methods. Recommendations for preferred dimensions of products are in the informative annex A.
In this standard only general requirements are specified for elastomeric and plastic components. Separate standards for elastomeric and plastic products used in flue systems are under elaboration as prEN 14241-...
view more

    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies requirements and test methods for metal flue ducts material independent air supply ducts for room sealed appliances.
It also specifies the requirements for marking, manufacturer's instruction, product information and evaluation of conformity.
NOTE 1   Recommendations for preferred dimensions of products are given in the informative Annex A.
NOTE 2   In this European Standard, only general requirements are specified for elastomeric and plastic components. Elastomer...
view more

    • sale 10% off
    • Standard
      79 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as "wet chimney") with pressure type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to !EN 13063-1:2005+A1", in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this document. This European Standard does not app...view more

    • sale 10% off
    • Standard – translation
      40 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for multiwall soot fire resistant system chimneys, working under dry conditions, with corrosion resistance 3, with negative pressure (see EN 1443) in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this standard. This standard does not apply to structurally independent (free standing or self-supporting) system chimneys. A soot fire resist...view more

    • sale 10% off
    • Standard – translation
      37 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      38 pages
      English language
    • e-Library read for
      1 day

This European Standard specifies the requirements and test methods for multiwall system chimneys working under wet conditions (in the following expressed as wet chimney) with pressure
type N1, N2 or P1 according to EN 1443 and a working temperature below or equal T600 according to !EN 13063-1:2005+A1", in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners. Marking and inspection are also covered by this document.
This European Standard does not ap...
view more

    • sale 10% off
    • Standard – translation
      40 pages
      Slovenian language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day
    • sale 10% off
    • Standard
      39 pages
      English language
    • e-Library read for
      1 day

This product standard specifies the requirements and test methods for dry (designated D) and/or wet (designated W) air flue system chimneys, including terminals in which the products of combustion are conveyed to the atmosphere through clay/ceramic flue liners and combustion air is conveyed to suitable room-sealed appliances through an air duct or an air gap.
It also specifies the requirements for marking, manufacturer's instructions, product information and evaluation of conformity.
This stan...
view more

    • sale 10% off
    • Standard
      27 pages
      English language
    • e-Library read for
      1 day