SIST EN 61753-088-2:2013
(Main)Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environment
- Abstract
IEC 61753-088-2:2013 contains the minimum initial test and measurement requirements and severities which a non-connectorized single-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in order to be categorized as meeting the requirements of Category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007. The applications of LAN WDM devices are optical MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and 100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as shown in Annex D. The requirements cover both an integrated 1 x 4 LAN WDM device and an individual 1 x 2 LAN WDM device for cascaded module construction. Keywords: Local Area Network Wavelength Division Multiplexing (LAN WDM), 800 GHz, Category C
- Status
- Published
- Publication Date
- 11-Sep-2013
- Technical Committee
- MOC - Mobile Communications
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 29-Aug-2013
- Due Date
- 03-Nov-2013
- Completion Date
- 12-Sep-2013
SIST EN 61753-088-2:2013 is the Slovenian adoption of EN 61753-088-2:2013, identical to IEC 61753-088-2:2013. It specifies minimum initial test and measurement requirements for non-connectorized single-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) devices with 800 GHz channel spacing. The standard is for Category C - Controlled environments, so it is aimed at products that will be qualified for controlled operating conditions rather than general-purpose use.
What does SIST EN 61753-088-2:2013 specify?
SIST EN 61753-088-2:2013 specifies how to qualify LAN WDM devices for controlled environments and how to verify their channel performance. It covers both an integrated 1 × 4 LAN WDM device and an individual 1 × 2 LAN WDM device used for cascaded module construction.
| Annex | What it covers |
|---|---|
| Annex A | Sample size |
| Annex B | Logarithmic transfer matrix for an integrated 1 × 4 LAN WDM device |
| Annex C | Logarithmic transfer matrix for an individual 1 × 2 LAN WDM device |
| Annex D | General information for applications of integrated 1 × 4 LAN WDM devices |
| Annex E | General information for internal configurations of integrated 1 × 4 LAN WDM devices |
The document is organized into clauses for scope, normative references, terms and definitions, test conditions, test report, reference components, and performance requirements. In practice, that means the standard tells a manufacturer or lab what device types are covered, what must be tested, and what evidence has to be recorded.
What are the key requirements of SIST EN 61753-088-2:2013?
Test conditions and sampling
SIST EN 61753-088-2:2013 requires testing under the IEC 61300 series unless a clause states otherwise. Samples are expected to be new, unstressed devices, although previously used samples may also be selected, and the fibre pigtails must match the single-mode fibre categories named in the document.
This matters because qualification results depend on the test setup and the sample population. The standard also requires standard atmospheric conditions unless otherwise specified, and if the device has active temperature control, it must be set to the manufacturer’s stated set-point.
Clause 4 says the requirements apply to every input-output port combination, and the qualification has to cover the required operating channel frequency range. Annex A sets the sample size: optical performance tests use more samples than environmental and mechanical tests, so test planning has to separate the qualification campaign accordingly.
Channel and device performance
Clause 7.1 gives the channel structure for the four LAN WDM channels, including their spacing and operating frequency ranges. In practice, this anchors the device to the intended LAN WDM grid used by 100GBASE-LR4 and 100GBASE-ER4 applications.
Clause 7.2 says dimensions shall comply with the manufacturer’s drawings. That means mechanical fit and package constraints are controlled by the product drawing, so procurement and design teams need the drawing set as part of the technical file.
Clause 7.3 and Table 2 define the main performance checks: attenuation, adjacent channel isolation, non-adjacent channel isolation, return loss, directivity, polarization dependent loss (PDL), optical power handling, cold, high temperature endurance, damp heat, change of temperature, vibration, shock, optical fibre cable flexing, fibre/cable retention, and static side load. For each item, the table links the test method, the measurement conditions, and the acceptance requirement.
What the test results have to show
For the optical characteristics, the standard checks that insertion loss, channel isolation, return loss, directivity and PDL stay within the required limits over the channel frequency range. The practical implication is that the device must not only meet a static channel plan, but also hold its optical behaviour across the full relevant band and across all port states.
The environmental and mechanical tests are not separate design exercises - they are follow-up checks after stress. The device has to meet the optical limits again after temperature, humidity, vibration, shock and fibre-handling tests, which is how the standard links robustness to optical performance.
Why the annex matrices matter
Annex B and Annex C provide logarithmic transfer matrices for the integrated 1 × 4 device and the individual 1 × 2 device. These matrices show how signals are expected to pass through the device path by path, which is useful for design verification, module construction and test interpretation.
Annex D and Annex E give application and configuration information. That helps readers understand how the parts fit into 100GBASE-LR4 and 100GBASE-ER4 transmit/receive paths and how serial-type and tree-type internal arrangements are built.
What terms does SIST EN 61753-088-2:2013 define?
- LAN WDM device - a wavelength-selective branching device that performs both multiplexing and demultiplexing for the four 800 GHz-spaced channels.
- integrated 1 × 4 LAN WDM device - a single-mode fibre-pigtailed device with one common port and four input/output ports for the four channels.
- individual 1 × 2 LAN WDM device - a single-mode fibre-pigtailed device with one common port and two input/output ports, made in four types for the four channel positions.
- MUX - the multiplexing function that combines separate wavelength channels onto one fibre path.
- DEMUX - the demultiplexing function that separates the wavelength channels from one fibre path.
- PDL - polarization dependent loss, the variation in loss with state of polarization, which matters because it can affect link margin.
Who uses SIST EN 61753-088-2:2013?
Manufacturers of fibre optic interconnecting devices use this standard to design and qualify LAN WDM modules. Test laboratories use it to select the correct IEC 61300 methods and to report results in a form that can be compared across suppliers.
Quality managers and buyers use it when they need a controlled-environment performance standard for optical MUX and DEMUX devices in 100GBASE-LR4 and 100GBASE-ER4 applications. System integrators and module builders use it when assembling integrated 1 × 4 devices or cascaded 1 × 2 devices into optical transmission paths.
What changed in SIST EN 61753-088-2:2013 from the previous edition?
This first edition cancels and replaces IEC/PAS 61753-088-2 published in 2010.
Which standards are used with SIST EN 61753-088-2:2013?
- IEC 60793-2-50 - defines class B single-mode fibres used for the pigtails.
- IEC 61300 series - supplies the basic test and measurement procedures used throughout the standard.
- IEC 61300-2-1, -2-4, -2-9, -2-17, -2-18, -2-19, -2-22, -2-42 - provide the vibration, retention, shock, cold, dry heat, damp heat, temperature change and static side load methods.
- IEC 61300-3-7, -3-20, -3-28, -3-29 - provide the measurement methods for wavelength-dependent attenuation and return loss, directivity, transient loss and spectral transfer function characterisation.
- IEC 61753-1:2007 - gives the general guidance and the Category C framework for performance standards.
- IEC 62074-1 - gives the generic specification and terms for fibre optic WDM devices.
- ITU-T Recommendation G.959.1 - provides the optical transport network physical layer interface context.
- IEEE P802.3ba - provides the Ethernet application context for 100GBASE-LR4 and 100GBASE-ER4.
The bibliography also notes IEC 61300-3-2 and IEC 61753-021-2.
What does the SIST EN 61753-088-2:2013 document contain?
SIST EN 61753-088-2:2013 contains the test conditions in Clause 4, the reporting requirement in Clause 5, the reference-component statement in Clause 6, and the performance requirements in Clause 7. Table 1 sets the channel requirements, and Table 2 gives the test details and acceptance criteria for the optical, environmental and mechanical checks.
The document also includes Figure 1 and Figure 2 for the two device configurations, Figure D.1 for the 100GBASE-LR4 and 100GBASE-ER4 transmit/receive path, and Figure E.1 to Figure E.3 for example internal configurations. Annex B and Annex C provide the logarithmic transfer matrices that support design and verification of the integrated and individual device types.
Relations
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
- Effective Date
- 03-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 61753-088-2:2013 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environment". This standard covers: IEC 61753-088-2:2013 contains the minimum initial test and measurement requirements and severities which a non-connectorized single-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in order to be categorized as meeting the requirements of Category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007. The applications of LAN WDM devices are optical MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and 100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as shown in Annex D. The requirements cover both an integrated 1 x 4 LAN WDM device and an individual 1 x 2 LAN WDM device for cascaded module construction. Keywords: Local Area Network Wavelength Division Multiplexing (LAN WDM), 800 GHz, Category C
IEC 61753-088-2:2013 contains the minimum initial test and measurement requirements and severities which a non-connectorized single-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in order to be categorized as meeting the requirements of Category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007. The applications of LAN WDM devices are optical MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and 100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as shown in Annex D. The requirements cover both an integrated 1 x 4 LAN WDM device and an individual 1 x 2 LAN WDM device for cascaded module construction. Keywords: Local Area Network Wavelength Division Multiplexing (LAN WDM), 800 GHz, Category C
SIST EN 61753-088-2:2013 is classified under the following ICS (International Classification for Standards) categories: 33.180.20 - Fibre optic interconnecting devices. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 61753-088-2:2013 has the following relationships with other standards: It is inter standard links to SIST EN 61300-1:2011, SIST EN 61300-3-7:2012, SIST EN 60793-2-50:2013, SIST EN 61300-2-4:1999, SIST EN 62074-1:2010, SIST EN 61300-2-42:2006, SIST EN 61300-3-28:2012, SIST EN 61300-2-22:2007, SIST EN 61753-1:2010, SIST EN 61300-3-29:2006, SIST EN 61300-3-20:2002, SIST EN 61300-2-19:2013, SIST EN 61300-2-9:2011, SIST EN 61300-2-1:2010, SIST EN 61300-2-18:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 61753-088-2:2013 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
1DSUDYH/$1:'0]DHQRURGQDRSWLþQDYODNQDEUH]NRQHNWRUMHY]PHGNDQDOVNLP
UD]PLNRP*+]]DNDWHJRULMR&1DG]RURYDQRRNROMH
Fibre optic interconnecting devices and passive components -Performance standard -
Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel
spacing of 800 GHz for category C - Controlled environment
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
088-2: Nicht mit Steckverbindern versehene Einmoden LWL-LAN-WDM-Geräte mit
Kanalweiten von 800 GHz für Kategorie C - Kontrollierte Umgebung
Ta slovenski standard je istoveten z: EN 61753-088-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-088-2
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices
with channel spacing of 800 GHz for category C -
Controlled environments
(IEC 61753-088-2:2013)
Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile - Betriebsverhalten -
Partie 088-2: Dispositifs LAN WDM à Teil 088-2: Nicht mit Steckverbindern
fibres optiques unimodales, non versehene Einmoden LWL-LAN-WDM-
connectorisés, avec un espacement entre Geräte mit Kanalweiten von 800 GHz für
canaux de 800 GHz, pour catégorie C - Kategorie C - Kontrollierte Umgebung
Environnements contrôlés (IEC 61753-088-2:2013)
(CEI 61753-088-2:2013)
This European Standard was approved by CENELEC on 2013-04-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-088-2:2013 E
Foreword
The text of document 86B/3549/FDIS, future edition 1 of IEC 61753-088-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-088-2:2013.
The following dates are fixed:
(dop) 2014-01-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61753-088-2:2013 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-3-2 NOTE Harmonised as EN 61300-3-2.
IEC 61753-021-2 NOTE Harmonised as EN 61753-021-2.
- 3 - EN 61753-088-2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - EN 60793-2-50 -
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 61300 Series Fibre optic interconnecting devices and EN 61300 Series
passive components - Basic test and
measurement procedures
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-9 - Fibre optic interconnecting devices and EN 61300-2-9 -
passive components - Basic test and
measurement procedures -
Part 2-9: Tests - Shock
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High
temperature endurance
IEC 61300-2-19 - Fibre optic interconnecting devices and EN 61300-2-19 -
passive components - Basic test and
measurement procedures -
Part 2-19: Tests - Damp heat (steady state)
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
Publication Year Title EN/HD Year
IEC 61300-3-7 - Fibre optic interconnecting devices and EN 61300-3-7 -
passive components - Basic test and
measurement procedures -
Part 3-7: Examinations and measurements -
Wavelength dependence of attenuation and
return loss of single mode components
IEC 61300-3-20 - Fibre optic interconnecting devices and EN 61300-3-20 -
passive components - Basic test and
measurement procedures -
Part 3-20: Examinations and measurements
- Directivity of fibre optic branching devices
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements
- Transient loss
IEC 61300-3-29 - Fibre optic interconnecting devices and EN 61300-3-29 -
passive components - Basic test and
measurement procedures -
Part 3-29: Examinations and measurements
- Measurement techniques for characterising
the amplitude of the spectral transfer
function of DWDM components
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for
performance standards
IEC 62074-1 - Fibre optic interconnecting devices and EN 62074-1 -
passive components - Fibre optic WDM
devices -
Part 1: Generic specification
ITU-T - Optical transport network physical layer - -
Recommendation interfaces
G.959.1
IEEE P802.3ba - Carrier Sense Multiple Access with Collision - -
Detection (CSMA/CD) Access Method and
Physical Layer Specifications
IEC 61753-088-2 ®
Edition 1.0 2013-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with
channel spacing of 800 GHz for category C – Controlled environments
Dispositifs d’interconnexion et composants passifs à fibres optiques – Norme
de performance –
Partie 088-2: Dispositifs LAN WDM à fibres optiques unimodales, non
connectorisés, avec un espacement entre canaux de 800 GHz, pour catégorie C
– Environnements contrôlés
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 33.180.20 ISBN 978-2-83220-653-9
– 2 – 61753-088-2 © IEC:2013
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Test conditions . 8
5 Test report . 8
6 Reference components . 9
7 Performance requirements . 9
7.1 Channel requirements . 9
7.2 Dimensions . 9
7.3 Test details and requirements . 9
Annex A (normative) Sample size . 15
Annex B (informative) Logarithmic transfer matrix for an integrated 1 × 4 LAN WDM
device . 16
Annex C (informative) Logarithmic transfer matrix for an individual 1 × 2 LAN WDM
device . 18
Annex D (informative) General information for applications of integrated 1 × 4 LAN
WDM devices . 22
Annex E (informative) General information for internal configurations of integrated 1 ×
4 LAN WDM devices . 23
Bibliography . 25
Figure 1 – Configuration of integrated 1 × 4 LAN WDM device . 8
Figure 2 – Configuration of individual 1 × 2 LAN WDM device . 8
Figure D.1 – Block diagram for 100GBASE-LR4 and 100GBASE-ER4 transmit/receive
paths . 22
Figure E.1 – Configuration example of serial-type integrated 1 × 4 LAN WDM device
(DEMUX) . 23
Figure E.2 – Configuration example of serial-type integrated 1 × 4 LAN WDM device
(MUX) . 23
Figure E.3 – Configuration example of tree-type integrated 1 × 4 LAN WDM device
(MUX/DEMUX) . 24
Table 1 – Channel requirements . 9
Table 2 – Test details and requirements . 10
Table A.1 – Number of samples for each test . 15
Table B.1 – Logarithmic transfer matrix for channel 1: Frequency range of 231,584 –
231,216 THz (≈1 294,53 – 1 296,59 nm) . 16
Table B.2 – Logarithmic transfer matrix for channel 2: Frequency range of 230,784 –
230,416 THz (≈1 299,02 – 1 301,09 nm) . 16
Table B.3 – Logarithmic transfer matrix for channel 3: Frequency range of 229,984 –
229,616 THz (≈1 303,54 – 1 305,63 nm) . 16
Table B.4 – Logarithmic transfer matrix for channel 4: Frequency range of 229,184 –
228,816 THz (≈1 308,09 – 1 310,19 nm) . 17
61753-088-2 © IEC:2013 – 3 –
Table C.1 – Logarithmic transfer matrix for channel 1: Frequency range of 231,584 –
231,216 THz (≈1 294,53 – 1 296,59 nm) . 18
Table C.2 – Logarithmic transfer matrix for channel 2: Frequency range of 230,784 –
230,416 THz (≈1 299,02 – 1 301,09 nm) . 18
Table C.3 – Logarithmic transfer matrix for channel 3: Frequency range of 229,984 –
229,616 THz (≈1 303,54 – 1 305,63 nm) . 18
Table C.4 – Logarithmic transfer matrix for channel 4: Frequency range of 229,184 –
228,816 THz (≈1 308,09 – 1 310,19 nm) . 18
Table C.5 – Logarithmic transfer matrix for channel 1: Frequency range of 231,584 –
231,216 THz (≈1 294,53 – 1 296,59 nm) . 19
Table C.6 – Logarithmic transfer matrix for channel 2: Frequency range of 230,784 –
230,416 THz (≈1 299,02 – 1 301,09 nm) . 19
Table C.7 – Logarithmic transfer matrix for channel 3: Frequency range of 229,984 –
229,616 THz (≈1 303,54 – 1 305,63 nm) . 19
Table C.8 – Logarithmic transfer matrix for channel 4: Frequency range of 229,184 –
228,816 THz (≈1 308,09 – 1 310,19 nm) . 19
Table C.9 – Logarithmic transfer matrix for channel 1: Frequency range of 231,584 –
231,216 THz (≈1 294,53 – 1 296,59 nm) . 19
Table C.10 – Logarithmic transfer matrix for channel 2: Frequency range of 230,784 –
230,416 THz (≈1 299,02 – 1 301,09 nm) . 20
Table C.11 – Logarithmic transfer matrix for channel 3: Frequency range of 229,984 –
229,616 THz (≈1 303,54 – 1 305,63 nm) . 20
Table C.12 – Logarithmic transfer matrix for channel 4: Frequency range of 229,184 –
228,816 THz (≈1 308,09 – 1 310,19 nm) . 20
Table C.13 – Logarithmic transfer matrix for channel 1: Frequency range of 231,584 –
231,216 THz (≈1 294,53 – 1 296,59 nm) . 20
Table C.14 – Logarithmic transfer matrix for channel 2: Frequency range of 230,784 –
230,416 THz (≈1 299,02 – 1 301,09 nm) . 20
Table C.15 – Logarithmic transfer matrix for channel 3: Frequency range of 229,984 –
229,616 THz (≈1 303,54 – 1 305,63 nm) . 21
Table C.16 – Logarithmic transfer matrix for channel 4: Frequency range of 229,184 –
228,816 THz (≈1 308,09 – 1 310,19 nm) . 21
– 4 – 61753-088-2 © IEC:2013
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 088-2: Non-connectorized single-mode fibre optic LAN WDM
devices with channel spacing of 800 GHz for category C –
Controlled environments
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61753-088-2 has been prepared by subcommittee 86B: Fibre optic
interconnecting devices and passive components of IEC technical committee 86: Fibre optics.
This first edition of IEC 61753-088-2 cancels and replaces IEC/PAS 61753-088-2 published in
2010.
The text of this standard is based on the following documents:
FDIS Report on voting
86B/3549/FDIS 86B/3591/RVD
61753-088-2 © IEC:2013 – 5 –
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all parts in the IEC 61753 series, published under the general title, Fibre optic
interconnecting devices and passive components performance standard, can be found on the
IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – 61753-088-2 © IEC:2013
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
PERFORMANCE STANDARD –
Part 088-2: Non-connectorized single-mode fibre optic LAN WDM
devices with channel spacing of 800 GHz for category C –
Controlled environments
1 Scope
This part of IEC 61753 contains the minimum initial test and measurement requirements and
severities which a non-connectorized single-mode fibre optic Local Area Network Wavelength
Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in
order to be categorized as meeting the requirements of Category C – Controlled environments,
as defined in Annex A of IEC 61753-1:2007. The applications of LAN WDM devices are optical
MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and
100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as
shown in Annex D. The requirements cover both an integrated 1 × 4 LAN WDM device and an
individual 1 × 2 LAN WDM device for cascaded module construction.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and
are indispensable for its application. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 60793-2-50, Optical fibres – Part 2-50: Product specifications – Sectional specification for
class B single-mode fibres
IEC 61300 (all parts), Fibre optic interconnecting devices and passive components – Basic
test and measurement procedures
IEC 61300-2-1, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-1: Tests – Vibration (sinusoidal)
IEC 61300-2-4, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-4: Tests – Fibre/cable retention
IEC 61300-2-9, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-9: Tests – Shock
IEC 61300-2-17, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-17: Tests – Cold
IEC 61300-2-18, Fibre optic interconnecting devices and passive components – Basic test and
measurement procedures – Part 2-18: Tests – Dry heat – High temperature endurance
IEC 61300-2-19, Fibre optic interconnecting devic
...