EN 61753-088-2:2013

Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments

IEC 61753-088-2:2013 contains the minimum initial test and measurement requirements and severities which a non-connectorized single-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in order to be categorized as meeting the requirements of Category C - Controlled environments, as defined in Annex A of IEC 61753-1:2007. The applications of LAN WDM devices are optical MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and 100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as shown in Annex D. The requirements cover both an integrated 1 x 4 LAN WDM device and an individual 1 x 2 LAN WDM device for cascaded module construction. Keywords: Local Area Network Wavelength Division Multiplexing (LAN WDM), 800 GHz, Category C

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 088-2: Nicht mit Steckverbindern versehene Einmoden LWL-LAN-WDM-Bauteile mit Kanalabstand von 800 GHz für Kategorie C - Kontrollierte Umgebung

Dispositifs d’interconnexion et composants passifs à fibres optiques - Norme de performance - Partie 088-2: Dispositifs LAN WDM à fibres optiques unimodales, non connectorisés, avec un espacement entre canaux de 800 GHz, pour catégorie C - Environnements contrôlés

La CEI 61753-088-2:2013 contient les exigences d'essais et de mesures et les sévérités initiales minimales auxquelles un dispositif à fibres optiques unimodales non connectorisé pour réseau local avec multiplexage par répartition en longueur d'onde (LAN WDM), avec un espacement entre canaux de 800 GHz, est sensé satisfaire afin d'être classé comme conforme aux exigences de la Catégorie C - Environnements contrôlés, tel que défini en Annexe A de la CEI 61753-1:2007. Les applications des dispositifs LAN WDM sont le multiplexage et le démultiplexage optiques pour 100GBASE-LR4 (plage de fonctionnement exigée comprise entre 2 m et 10 km) et 100GBASE-ER4 (plage de fonctionnement exigée comprise entre 2 m et 30 km), définis dans l'IEEE P802.3ba, tel que représenté en Annexe D. Les exigences couvrent à la fois un dispositif LAN WDM 1 x 4 intégré et un dispositif LAN WDM 1 x 2 individuel pour une construction de modules en cascade. Mots clés: réseau local avec multiplexage par répartition en longueur d'onde (LAN WDM), 800 GHz, Catégorie C

Optični spojni elementi in pasivne komponente - Tehnični standard - 088-2. del: Naprave LAN WDM za enorodna optična vlakna, brez konektorjev, z medkanalskim razmikom 800 GHz za kategorijo C - Nadzorovano okolje

Ta del standarda IEC 61753 zajema najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora naprava lokalnega omrežja za valovno dolžinsko multipleksiranje (LAN WDM) z enorodnim optičnim vlaknom brez konektorjev z medkanalskim razmikom 800 GHz izpolnjevati, da izpolnjuje zahteve kategorije C – nadzorovano okolje, kakor je določeno v dodatku A standarda IEC 61753-1:2007. Uporabe naprav LAN WDM so optični MUX in DEMUX za 100GBASE-LR4 (zahtevano območje delovanja od 2 m do 10 km) in 100GBASE-ER4 (zahtevano območje delovanja od 2 m do 30 km), določeno v IEEE P802.3ba, kot je prikazano v dodatku D. Zahteve vključujejo tako integrirano napravo 1 ? 4 LAN WDM kot posamezno napravo 1 ? 2 LAN WDM za kaskadno modularno konstrukcijo.

General Information

• Status: Published
• Publication Date: 20-Jun-2013
• Withdrawal Date: 21-Apr-2016
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/TC 86BXA - Fibre optic interconnect, passive and connectorised components
• Drafting Committee: IEC/SC 86B - IEC_SC_86B
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 21-Jun-2013
• Completion Date: 21-Jun-2013
• Ref Project: SIST EN 61753-088-2:2013 - Fibre optic interconnecting devices and passive components -Performance standard - Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61753-088-2:2013
01-oktober-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
1DSUDYH/$1:'0]DHQRURGQDRSWLþQDYODNQDEUH]NRQHNWRUMHY]PHGNDQDOVNLP
UD]PLNRP*+]]DNDWHJRULMR&1DG]RURYDQRRNROMH
Fibre optic interconnecting devices and passive components -Performance standard -
Part 088-2: Non connectorised single-mode fibre optic LAN WDM devices with channel
spacing of 800 GHz for category C - Controlled environment
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
088-2: Nicht mit Steckverbindern versehene Einmoden LWL-LAN-WDM-Geräte mit
Kanalweiten von 800 GHz für Kategorie C - Kontrollierte Umgebung
Ta slovenski standard je istoveten z: EN 61753-088-2:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61753-088-2:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61753-088-2:2013

---------------------- Page: 2 ----------------------

SIST EN 61753-088-2:2013

EUROPEAN STANDARD
EN 61753-088-2

NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM

ICS 33.180.20


English version


Fibre optic interconnecting devices and passive components -
Performance standard -
Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices
with channel spacing of 800 GHz for category C -
Controlled environments
(IEC 61753-088-2:2013)


Dispositifs d’interconnexion et Lichtwellenleiter -
composants passifs à fibres optiques - Verbindungselemente und passive
Norme de performance - Bauteile - Betriebsverhalten -
Partie 088-2: Dispositifs LAN WDM à Teil 088-2: Nicht mit Steckverbindern
fibres optiques unimodales, non versehene Einmoden LWL-LAN-WDM-
connectorisés, avec un espacement entre Geräte mit Kanalweiten von 800 GHz für
canaux de 800 GHz, pour catégorie C - Kategorie C - Kontrollierte Umgebung
Environnements contrôlés (IEC 61753-088-2:2013)
(CEI 61753-088-2:2013)


This European Standard was approved by CENELEC on 2013-04-22. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-088-2:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61753-088-2:2013
EN 61753-088-2:2013 - 2 -
Foreword
The text of document 86B/3549/FDIS, future edition 1 of IEC 61753-088-2, prepared by SC 86B "Fibre
optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics" was submitted to
the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-088-2:2013.
The following dates are fixed:
(dop) 2014-01-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-04-22
• latest date by which the national
standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.

Endorsement notice
The text of the International Standard IEC 61753-088-2:2013 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 61300-3-2 NOTE Harmonised as EN 61300-3-2.
IEC 61753-021-2 NOTE Harmonised as EN 61753-021-2.
...