SIST EN 61300-2-4:1999

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-4: Tests - Fibre/cable retention

IEC 61300-2-4:1995 is to ensure that the captivation or attachment of the fibre/cable to a fibre optic device will withstand tensile loads likely to be applied during normal service.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Meßverfahren -- Teil 2-4: Prüfungen - Zugfestigkeit von Faser- oder Kabelanschluß

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-4: Essais - Rétention de la fibre ou du câble

IEC 61300-2-4: 1995 vérifie que le dispositif de rétention ou de fixation de la fibre ou du câble à un dispositif à fibres optiques résistera aux charges de traction susceptibles d'être appliquées dans des conditions normales de fonctionnement.

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4:1995)

General Information

• Status: Withdrawn
• Publication Date: 30-Apr-1999
• Withdrawal Date: 10-Mar-2020
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Mar-2020
• Due Date: 03-Apr-2020
• Completion Date: 11-Mar-2020
• Ref Project: EN 61300-2-4:1997 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention

Relations

• Replaced By: SIST EN IEC 61300-2-4:2019 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention (IEC 61300-2-4:2019)
• Effective Date: 12-Mar-2019
• Revised: SIST EN IEC 61300-2-4:2019 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre or cable retention (IEC 61300-2-4:2019)
• Effective Date: 15-Mar-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61300-2-4:1999
01-maj-1999
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-
4:1995)
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-4: Tests - Fibre/cable retention
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Meßverfahren -- Teil 2-4: Prüfungen - Zugfestigkeit von Faser- oder Kabelanschluß
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-4: Essais - Rétention de la fibre ou du
câble
Ta slovenski standard je istoveten z: EN 61300-2-4:1997
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
SIST EN 61300-2-4:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

NORME CEI
INTERNATIONALE IEC
1300-2-4
INTERNATIONAL
Première édition
STANDARD
First edition
1995-06
Dispositifs d'interconnexion et composants
passifs à fibres optiques –
Méthodes fondamentales d'essais
et de mesures –
Partie 2-4:
Essais – Rétention de la fibre ou du câble
Fibre optic interconnecting devices
and passive components –
Basic test and measurement procedures –
Part 2-4:
Tests – Fibre/cable retention
© CEI 1995 Droits de reproduction réservés — Copyright — all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun pro- any form or by any means, electronic or mechanical,
cédé, électronique ou mécanique, y compris la photocopie et including photocopying and microfilm, without permission
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé
Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
PRICE CODE
IEC McKayHaponHaa 3nearporexHH4ecKaa KoMiiccwi
Pour prix, voir catalogue en vigueur •
For price, see current catalogue

---------------------- Page: 2 ----------------------

1300-2-4 © IEC:1995 - 3 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-4: Tests – Fibre/cable retention
FOREWORD
1)
The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
3) They have the form of recommendations for international use published in the form of standards, technical
reports or guides and they are accepted by the National Committees in that sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
International Standard IEC 1300-2-4 has been prepared by sub-committee 86B: Fibre optic
interconnecting devices and passive components, of IEC technical committee 86: Fibre optics.
The text of this standard is based on the following documents:
DIS Report on voting
86B/533/DIS 86B/617/RVD
Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
IEC 1300 consists of the following parts, under the general title Fibre optic interconnecting
devices and passive components - Basic test and measurement procedures:
Part 1: General and guidance
Part 2: Tests
Part 3: Examinations and measurements

---------------------- Page: 3 ----------------------

1300-2-4 © IEC:1995 - 5 -
FIBRE OPTIC INTERCONNECTING DEVICES
AND PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –
Part 2-4: Tests – Fibre/cable retention
1 General
1.1 Scope and object
The purpose of this part of IEC 1300 is to ensure that the captivati
...