kSIST FprEN 16223-1:2022
(Main)Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 1: upholstery applications
Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications - Part 1: upholstery applications
This European Standard specifies requirements for the designations and descriptions that should be used in public or commercial communications, labels or product descriptions when leather is used in upholstered furniture application.
The designation or description of leather in footwear, leather goods and leather clothing including gloves are not covered by this document.
Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen - Teil 1: Verwendungen bei Polstermöbeln
Dieses Dokument legt die Anforderungen an die Bezeichnungen und Beschreibungen fest, die im Rahmen des Warenaustausches beim Ausstellen, bei der Verkaufsförderung (z. B. Werbung und Etikettierung) und beim Inverkehrbringen verwendet werden, wenn Leder bei Polstermöbeln verwendet wird.
Möbelteile, deren Aussehen nicht dem von Leder entspricht (z. B. Holz, Metall) und Teile mit rein dekorativem Charakter werden in diesem Dokument nicht behandelt.
Die Bezeichnung und/oder Beschreibung von Leder in Schuhen, Lederwaren und bei Lederbekleidung einschließlich Handschuhen wird in diesem Dokument nicht behandelt.
Die Bezeichnung und/oder Beschreibung von Leder in der Innenausstattung von Automobilen werden in EN 16223 2 behandelt.
Cuir - Exigences relatives à la désignation et à la description du cuir des garnitures et intérieurs automobiles - Partie 1 : Garnitures
Le présent document spécifie les exigences relatives aux désignations et aux descriptions utilisées pour les communications publiques ou commerciales, les étiquettes ou descriptions de produit lorsque le cuir est utilisé dans les meubles rembourrés et les sièges.
La désignation et la description du cuir utilisé dans les chaussures, les articles de maroquinerie et les vêtements en cuir, y compris les gants, ne sont pas traitées dans le présent document.
La désignation et la description du cuir dans les applications liées à l’intérieur des automobiles sont traitées dans le prEN 16223 2.
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in avtomobilsko notranjo opremo - 1. del: Uporaba za oblazinjenje
General Information
RELATIONS
Standards Content (sample)
SLOVENSKI STANDARD
oSIST prEN 16223-1:2021
01-januar-2021
Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in
avtomobilsko notranjo opremo - 1. del: Uporaba za oblazinjenje
Leather - Requirements for the designation and description of leather in upholstery and
automotive interior applications - Part 1: upholstery applicationsLeder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen
und die Innenausstattung von Automobilen - Teil 1: Verwendungen bei Polstermöbeln
Ta slovenski standard je istoveten z: prEN 16223-1ICS:
59.140.30 Usnje in krzno Leather and furs
97.140 Pohištvo Furniture
oSIST prEN 16223-1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------oSIST prEN 16223-1:2021
---------------------- Page: 2 ----------------------
oSIST prEN 16223-1:2021
DRAFT
EUROPEAN STANDARD
prEN 16223-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2021
ICS 59.140.30 Will supersede EN 16223:2012
English Version
Leather - Requirements for the designation and
description of leather in upholstery and automotive
interior applications - Part 1: upholstery applications
Leder - Anforderungen an Bezeichnung und
Beschreibung von Leder für Polsterungen und die
Innenausstattung von Automobilen - Teil 1:
Verwendungen bei Polstermöbeln
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 289.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16223-1:2021 E
worldwide for CEN national Members.---------------------- Page: 3 ----------------------
oSIST prEN 16223-1:2021
prEN 16223-1:2021 (E)
Contents Page
European foreword ............................................................................................................................................ 3
Introduction .......................................................................................................................................................... 4
1 Scope .......................................................................................................................................................... 5
2 Normative references .......................................................................................................................... 5
3 Terms and definitions ......................................................................................................................... 5
4 General principles ................................................................................................................................ 6
5 Requirements ......................................................................................................................................... 6
Bibliography ......................................................................................................................................................... 7
---------------------- Page: 4 ----------------------oSIST prEN 16223-1:2021
prEN 16223-1:2021 (E)
European foreword
This document (prEN 16223-1:2021) has been prepared by Technical Committee CEN/TC 289 “Leather”,
the secretariat of which is held by UNI.This document is currently submitted to the CEN Enquiry.
This document will supersede EN 16223:2012.
In comparison with the previous edition, the following technical modifications have been made:
— EN 16223:2012 has been split into two parts, Part 1: Upholstery applications and Pa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.