SIST EN 17679:2022
(Main)Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
Plastics - Plastic films - Determination of tear resistance using a trapezoidal test specimen with incision
This document specifies a method of determining the tear resistance of a plastic film under specified conditions. It is applicable to products that, because of their flexibility, do not tear when clamped between the grips of a tensile testing machine. The method makes it possible to compare samples of different products provided their thickness does not differ by more than 10 %.
Prüfung von Kunststoff-Folien - Weiterreißversuch an trapezförmigen Proben mit Einschnitt
Dieses Dokument gibt ein Verfahren zur Bestimmung der Weitereißfestigkeit von Kunststofffolie unter bestimmten Bedingungen an. Es gilt für Produkte, die aufgrund ihrer Flexibilität nicht reißen, wenn sie zwischen die Klemmen einer Zugprüfmaschine gespannt werden. Das Verfahren ermöglicht den Vergleich von Proben unterschiedlicher Produkte unter der Voraussetzung, dass sich deren Dicke um nicht mehr als 10 % unterscheidet.
Plastiques - Films plastiques - Détermination de la résistance au déchirement sur éprouvettes trapézoïdales avec incision
La présente norme spécifie une méthode permettant de déterminer la résistance à la déchirure d’un film plastique dans des conditions spécifiées. Elle est applicable aux produits qui, en raison de leur flexibilité, ne se déchirent pas lorsqu’ils sont serrés dans les mors d’une machine d’essai de traction. La méthode permet de comparer des échantillons de produits différents à condition que leur épaisseur ne diffère pas de plus de 10 %.
Polimerni materiali - Plastične folije - Ugotavljanje odpornosti proti trganju z zarezovanjem trapezoidnega preskušanca
Ta dokument določa metodo za ugotavljanje odpornosti plastične folije proti trganju pod določenimi pogoji. Uporablja se za izdelke, ki se zaradi svoje prožnosti ne raztrgajo, ko jih vpnemo med ročaje stroja za natezno preskušanje. Metoda omogoča primerjavo vzorcev različnih izdelkov, če se njihova debelina ne razlikuje za več kot 10 %.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17679:2022
01-september-2022
Polimerni materiali - Plastične folije - Ugotavljanje odpornosti proti trganju z
zarezovanjem trapezoidnega preskušanca
Plastics - Plastic films - Determination of tear resistance using a trapezoidal test
specimen with incision
Prüfung von Kunststoff-Folien - Weiterreißversuch an trapezförmigen Proben mit
Einschnitt
Plastiques - Films plastiques - Détermination de la résistance au déchirement sur
éprouvettes trapézoïdales avec incision
Ta slovenski standard je istoveten z: EN 17679:2022
ICS:
83.140.10 Filmi in folije Films and sheets
SIST EN 17679:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17679:2022
---------------------- Page: 2 ----------------------
SIST EN 17679:2022
EN 17679
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2022
EUROPÄISCHE NORM
ICS 83.140.10
English Version
Plastics - Plastic films - Determination of tear resistance
using a trapezoidal test specimen with incision
Plastiques - Films plastiques - Détermination de la Kunststoffe - Kunststofffolien - Bestimmung des
résistance au déchirement sur éprouvettes Weiterreißwiderstands unter Verwendung eines
trapézoïdales avec incision trapezförmigen Probekörpers mit Einschnitt
This European Standard was approved by CEN on 22 May 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17679:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17679:2022
EN 17679:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Specimens . 5
4.1 Sampling and specimen preparation . 5
4.2 Number of specimens . 6
5 Apparatus . 6
6 Procedure . 6
7 Evaluation . 7
8 Test report . 7
Annex A (informative) Explanatory notes . 8
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 17679:2022
EN 17679:2022 (E)
European foreword
This document (EN 17679:2022) has been prepared by Technical Committee CEN/TC 249 “Plastics” the
secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2022, and conflicting national standards
shall be withdrawn at the latest by December 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is based on DIN 53363:2003-10.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST EN 17679:2022
EN 17679:2022 (E)
1 Scope
This document specifies a method of determining the tear resistance of a plastic film under specified
conditions. It is applicable to products that, because of their flexibility, do not tear when clamped
between the grips of a tensile testing machin
...
SLOVENSKI STANDARD
oSIST prEN 17679:2021
01-september-2021
Preskušanje polimernih folij - Pretržni preskus z zarezovanjem trapezoidnega
preskušanca
Testing of plastics films - Tear test using trapezoidal test specimen with incision
Prüfung von Kunststoff-Folien - Weiterreißversuch an trapezförmigen Proben mit
Einschnitt
Essais sur films plastiques - Essai de déchirure sur éprouvettes trapézoïdales avec
incision
Ta slovenski standard je istoveten z: prEN 17679
ICS:
83.140.10 Filmi in folije Films and sheets
oSIST prEN 17679:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17679:2021
---------------------- Page: 2 ----------------------
oSIST prEN 17679:2021
DRAFT
EUROPEAN STANDARD
prEN 17679
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2021
ICS 83.140.10
English Version
Testing of plastics films - Tear test using trapezoidal test
specimen with incision
Essais sur films plastiques - Essai de déchirure sur Prüfung von Kunststoff-Folien - Weiterreißversuch an
éprouvettes trapézoïdales avec incision trapezförmigen Proben mit Einschnitt
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17679:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17679:2021
prEN 17679:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Specimens . 5
4.1 Sampling and specimen preparation . 5
4.2 Number of specimens . 6
5 Apparatus . 6
6 Procedure . 6
7 Evaluation . 7
8 Test report . 7
9 Explanatory notes . 7
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 17679:2021
prEN 17679:2021 (E)
European foreword
This document (prEN 17679:2021) has been prepared by Technical Committee CEN/TC 249 “Plastics”
the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document is based on DIN 53363:2003-10.
3
---------------------- Page: 5 ----------------------
oSIST prEN 17679:2021
prEN 17679:2021 (E)
1 Scope
This document specifies a method of determining the tear resistance of a plastic film under specified
conditions. It is applicable to products that, because of their flexibility, do not tear when clamped
between the grips of a tensile testing machine. The method makes it possible to compare samples of
different products provided their thickness does not differ by more than 10 %.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
unda
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.