Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications

This European Standard specifies requirements for the designations and descriptions that should be used in public or commercial communications, labels or product descriptions when leather is used in upholstered furniture and automotive interior applications. The designation or description of leather in footwear, leather goods and leather clothing including gloves are not covered by this document.

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen

Dieses Dokument legt die Regeln für die Bezeichnungen und Beschreibungen fest, die in der öffentlichen und kommerziellen Kommunikation, auf Beschriftungen oder Produktbeschreibungen benutzt werden sollten, wenn Leder bei Polstermöbeln und in der Innenausstattung von Automobilen verwendet wird.
Die Bezeichnung oder Beschreibung von Leder in Schuhen, Lederwaren und bei Lederbekleidung einschließlich Handschuhen wird von diesem Dokument nicht erfasst.

Cuir - Lignes directrices relatives à la désignation et à la description du cuir pour garniture et applications aux intérieurs d'automobiles

La présente Norme européenne spécifie des exigences relatives aux désignations et aux descriptions qu’il convient d'utiliser pour les communications publiques ou commerciales, les étiquettes ou descriptions de produit lorsque le cuir est utilisé pour les meubles rembourrés et pour les applications liées à l'intérieur des automobiles.
La désignation et la description du cuir des articles chaussants, d’articles de maroquinerie et de vêtements en cuir, y compris les gants, ne sont pas traitées dans le présent document.

Usnje - Zahteve za označevanje in opisovanje usnja za oblazinjenje in avtomobilsko notranjo opremo

Ta evropski standard določa zahteve za označevanje in opisovanje, ki se morata uporabljati v javni ali komercialni komunikaciji, na nalepkah ali opisih izdelkov, ko se usnje uporablja za oblazinjenje pohištva in avtomobilsko notranjo opremo. Ta dokument ne zajema označevanja ali opisovanja usnja, ki se uporablja za obutev, usnjene izdelke in usnjena oblačila, vključno z rokavicami.

General Information

Status
Withdrawn
Publication Date
06-Oct-2013
Withdrawal Date
13-Jul-2022
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
14-Jul-2022
Due Date
06-Aug-2022
Completion Date
14-Jul-2022

RELATIONS

Buy Standard

Standard
SIST EN 16223:2013
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von AutomobilenCuir - Lignes directrices relatives à la désignation et à la description du cuir pour garniture et applications aux intérieurs d'automobilesLeather - Requirements for the designation and description of leather in upholstery and automotive interior applications97.140PohištvoFurniture59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN 16223:2012SIST EN 16223:2013en,fr,de01-november-2013SIST EN 16223:2013SLOVENSKI

STANDARD
SIST EN 16223:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16223
November 2012 ICS 59.140.30 English Version

Leather - Requirements for the designation and description of leather in upholstery and automotive interior applications

Cuir - Exigences relatives à la désignation et à la description du cuir pour garniture et applications liées à l'intérieur des automobiles

Leder - Anforderungen an Bezeichnung und Beschreibung von Leder für Polsterungen und die Innenausstattung von Automobilen This European Standard was approved by CEN on 29 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16223:2012: ESIST EN 16223:2013

EN 16223:2012 (E) 2 Contents Page Foreword ..............................................................................................................................................................3Introduction .........................................................................................................................................................41 Scope ......................................................................................................................................................52 Normative references ............................................................................................................................53 Terms and definitions ...........................................................................................................................54 General principles..................................................................................................................................65 Requirements .........................................................................................................................................66 Miscellaneous: communication on designation and description .....................................................7Bibliography ........................................................................................................................................................8 SIST EN 16223:2013

EN 16223:2012 (E) 3 Foreword This document (EN 16223:2012) has been prepared by Technical Committee CEN/TC 289 “Leather”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 16223:2013

EN 16223:2012 (E) 4 Introduction This European Standard is based on the Code of Practice of the International Council of Tanners (ICT) – Code of Practice on the appropriate designation of leather used in upholstery and automotive applications (Hong Kong, 30 March 2009). In the absence of national regulations this document provides the furniture and car industries with a standard on which to base their commercial communications to customers and the general public when leather is used in their products. SIST EN 16223:2013

EN 16223:2012 (E) 5

1 Scope This European Standard specifies requirements for the designations and descriptions that should be used in public or commercial communications, labels or product descriptions when leather is used in upholstered furniture and automotive interior applications. The designation or description of leather in footwear, leather goods and leather clothing including gloves are not covered by this document. 2 Normative references The following documents,

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.