SIST EN 3218-002:2009
(Main)Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements
Aerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements
This standard specifies the performance and contact arrangements of rectangular connectors with metallic shells and screw-locking as defined in EN 3218-001.
Luft- und Raumfahrt - Rechtecksteckverbinder mit metallischem Gehäuse und Schraubverriegelung - Teil 002: Leistungsdaten und Kontaktanordnungen
Diese Norm legt die Leistungsdaten und die Kontaktanordnungen von Rechtecksteckverbindern mit metallischem Gehäuse und Schraubverriegelung nach EN 3218 001 fest.
Série aérospatiale - Connecteurs rectangulaires à boîtiers métalliques et à verrouillage par vis - Partie 002 : Spécification de performances et d'arrangements des contacts
Aeronavtika - Konektorji, pravokotni, s kovinskim ohišjem in vijačnim zaklepanjem - 002. del: Specifikacija lastnosti in razporeditev kontaktov
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Rechtecksteckverbinder mit metallischem Gehäuse und Schraubverriegelung - Teil 002: Leistungsdaten und KontaktanordnungenSérie aérospatiale - Connecteurs rectangulaires à boîtiers métalliques et à verrouillage par vis - Partie 002 : Spécification de performances et d'arrangements des contactsAerospace series - Connectors, rectangular, with metallic shells and screw-locking - Part 002: Specification of performance and contact arrangements49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3218-002:2006SIST EN 3218-002:2009en,de01-julij-2009SIST EN 3218-002:2009SLOVENSKI
STANDARD
SIST EN 3218-002:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3218-002April 2006ICS 49.060 English VersionAerospace series - Connectors, rectangular, with metallic shellsand screw-locking - Part 002: Specification of performance andcontact arrangementsSérie aérospatiale - Connecteurs rectangulaires à boîtiersmétalliques et à verrouillage par vis - Partie 002 :Spécification de performances et d'arrangements descontactsLuft- und Raumfahrt - Rechtecksteckverbinder mitmetallischem Gehäuse und Schraubverriegelung - Teil 002:Leistungsdaten und KontaktanordnungenThis European Standard was approved by CEN on 27 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3218-002:2006: ESIST EN 3218-002:2009
EN 3218-002:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Coding of connector models and finishing of housings.5 4 Definitions.5 5 Operating conditions.5 6 List of product standards.7 7 Polarization and coding.7 8 Contact arrangements.9 9 Contacts.10 10 Filler plugs.10 11 Tools.10 12 Marking.10 13 Assembly and wiring instructions.10
SIST EN 3218-002:2009
EN 3218-002:2006 (E) 3 Foreword This document (EN 3218-002:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3218-002:2009
EN 3218-002:2006 (E) 4 1 Scope This standard specifies the performance and contact arrangements of rectangular connectors with metallic shells and screw-locking as defined in EN 3218-001. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.