SIST EN 61300-2-22:2007

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature

This part of IEC 61300 describes a procedure to determine the suitability of a fibre optic device to withstand the effects of a change of temperature or a succession of changes of temperature.

Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel

Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures -- Partie 2-22: Essais - Variations de température

La présente partie de la CEI 61300 a pour objet de décrire une procédure destinée à déterminer l'aptitude d'un dispositif à fibres optiques à résister aux effets d'une variation de température ou d'une succession de variations de température. La première édition spécifie les essais Na et Nb de la
CEI 60068-2-14, cette édition décrit la procédure des essais Nb et spécifie un " cycle facultatif " pour quelques autres catégories de performance.

Naprave za spajanje optičnih vlaken in pasivne komponente – Osnovni preskušalni in merilni postopki – 2-22. del: Preskusi – Sprememba temperature (IEC 61300-2-22:2007)

General Information

• Status: Published
• Publication Date: 11-Sep-2007
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 04-Sep-2007
• Due Date: 09-Nov-2007
• Completion Date: 12-Sep-2007
• Ref Project: EN 61300-2-22:2007 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature

Relations

• Replaces: SIST EN 61300-2-22:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature
• Effective Date: 29-Jan-2023
• Replaces: SIST EN 61300-2-22:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature
• Effective Date: 07-Jun-2022
• Replaces: SIST EN 61300-2-22:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature
• Effective Date: 01-Nov-2007
• Revised: SIST EN IEC 61300-2-22:2024 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature (IEC 61300-2-22:2024)
• Effective Date: 30-Mar-2021
• Revised: SIST EN 61300-2-22:1999 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-22: Tests - Change of temperature
• Effective Date: 13-May-2010

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2007
1DGRPHãþD
SIST EN 61300-2-22:1999
1DSUDYH]DVSDMDQMHRSWLþQLKYODNHQLQSDVLYQHNRPSRQHQWH±2VQRYQL
SUHVNXãDOQLLQPHULOQLSRVWRSNL±GHO3UHVNXVL±6SUHPHPEDWHPSHUDWXUH
,(&
Fibre optic interconnecting devices and passive components - Basic test and
measurement procedures -- Part 2-22: Tests - Change of temperature (IEC 61300-2-
22:2007)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Grundlegende Prüf- und
Messverfahren - Teil 2-22: Prüfungen - Temperaturwechsel (IEC 61300-2-22:2007)
Dispositifs d'interconnexion et composants passifs a fibres optiques - Méthodes
fondamentales d'essais et de mesures -- Partie 2-22: Essais - Variations de température
(IEC 61300-2-22:2007)
Ta slovenski standard je istoveten z: EN 61300-2-22:2007
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61300-2-22
NORME EUROPÉENNE
June 2007
EUROPÄISCHE NORM
ICS 33.180.20 Supersedes EN 61300-2-22:1997

English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-22: Tests -
Change of temperature
(IEC 61300-2-22:2007)
Dispositifs d'interconnexion  Lichtwellenleiter -
et composants passifs à fibres optiques - Verbindungselemente
Méthodes fondamentales d'essais und passive Bauteile -
et de mesures - Grundlegende Prüf- und Messverfahren -
Partie 2-22: Essais - Teil 2-22: Prüfungen -
Variations de température Temperaturwechsel
(CEI 61300-2-22:2007) (IEC 61300-2-22:2007)

This European Standard was approved by CENELEC on 2007-04-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-22:2007 E
Foreword
The text of document 86B/2440/FDIS, future edition 2 of IEC 61300-2-22, prepared by SC 86B, Fibre
optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61300-2-22 on 2007-04-01.
This European Standard supersedes EN 61300-2-22:1997.
EN 61300-2-22:1997 specifies tests Na and Nb of EN 60068-2-14, however this EN 61300-2-22:2007
describes the test method of Nb and specifies “optional cycle” for some other performance categories.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-01-01
national standard or by endorsement
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-04-01
Annexes ZA and ZB have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61300-2-22:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-1 NOTE  Harmonized as EN 61300-1:2003 (not modified).
IEC 61300-2-47 NOTE  Harmonized as EN 61300-2-47:2007 (not modified).
__________
- 3 - EN 61300-2-22:2007
Annex ZA
(normative)
Special national conditions
Special national condition: National characteristic or practice that cannot be changed even over a long
period, e.g. climatic conditions, electrical earthing conditions.

NOTE If it affects harmonization, it forms part of the European Standard / Harmonization Document.

For the countries in which the relevant special national conditions apply these provisions are normative,
for other countries they are informative.

Clause Special national condition
6, Table 1 Finland
In the categories E, O, A and G, the minimum temperature shall be –45 °C.
__________
Annex ZB
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

1) 2)
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 1999
Part 2: Tests - Test N: Change of temperature

1)
Undated reference.
2)
Valid edition at date of issue.

NORME CEI
INTERNATIONALE
IEC
61300-2-22
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
2007-02
Dispositifs d’interconnexion
et composants passifs à fibres optiques –
Méthodes fondamentales d’essais et de mesures –
Partie 2-22:
Essais –
Variations de température
Fibre optic interconnecting
devices and passive components –
Basic test and measurement procedures –
Part 2-22:
Tests –
Change of temperature
© IEC 2007 Droits de reproduction réservés ⎯ Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61300-2-22 © IEC:2007 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 General description .9
4 Apparatus.9
5 Procedure .9
5.1 Preconditioning .11
5.2 Initial measurements .11
5.3 Testing .11
5.4 Recovery.13
5.5 Final measurements .13
6 Severity.13
7 Details to be specified .15

Bibliography.17

Figure 1 – Temperature profile.11
Figure 2 – Optional temperature profile.13

Table 1 – Severities .13

61300-2-22 © IEC:2007 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS –
BASIC TEST AND MEASUREMENT PROCEDURES –

Part 2-22: Tests – Change of temperature

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide
...