SIST EN 301 908-2 V6.2.1:2014
(Main)IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
This EN will cover the essential requirements of article 3.2 of the R&TTE Directive for UTRA FDD UE in addition to those common ones of Part 1. The 6th release of the EN will cover all UTRA features that are relevant for UTRA FDD UE, up to and including 3GPP Release 10. In addition it covers any new operating band planned to be used in the 6th release.
Celična omrežja IMT - Harmonizirani EN, ki zajema bistvene zahteve člena 3.2 direktive R&TTE - 2. del: CDMA z neposrednim razprševanjem (“Direct Spread”) (UTRA FDD) (UE)
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.IMT cellular networks - Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive - Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)33.070.99Druge mobilne storitveOther mobile services33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-2 Version 6.2.1SIST EN 301 908-2 V6.2.1:2014en01-februar-2014SIST EN 301 908-2 V6.2.1:2014SLOVENSKI
STANDARD
SIST EN 301 908-2 V6.2.1:2014
ETSI EN 301 908-2 V6.2.1 (2013-10) IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
Harmonized European Standard SIST EN 301 908-2 V6.2.1:2014
ETSI ETSI EN 301 908-2 V6.2.1 (2013-10) 2
Reference REN/MSG-TFES-010-02 Keywords 3G, 3GPP, cellular, digital, IMT, mobile, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 908-2 V6.2.1:2014
ETSI ETSI EN 301 908-2 V6.2.1 (2013-10) 3 Contents Intellectual Property Rights . 6 Foreword . 6 Introduction . 6 1 Scope . 7 2 References . 8 2.1 Normative references . 8 2.2 Informative references . 8 3 Definitions, symbols and abbreviations . 9 3.1 Definitions . 9 3.2 Symbols . 10 3.3 Abbreviations . 10 4 Technical requirements specifications . 12 4.1 Environmental profile . 12 4.2 Conformance requirements . 12 4.2.1 Introduction. 12 4.2.2 Transmitter maximum output power. 12 4.2.2.1 Transmitter maximum output power . 12 4.2.2.1.1 Definition. 12 4.2.2.1.2 Limits . 13 4.2.2.1.3 Conformance . 13 4.2.2.2 Transmitter maximum output power for DC-HSUPA . 13 4.2.2.2.1 Definition for DC-HSUPA . 13 4.2.2.2.2 Limits for DC-HSUPA . 13 4.2.2.2.3 Conformance . 14 4.2.3 Transmitter spectrum emission mask . 14 4.2.3.1 Transmitter spectrum emission mask . 14 4.2.3.1.1 Definition. 14 4.2.3.1.2 Limits . 14 4.2.3.1.3 Conformance . 14 4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 15 4.2.3.2.1 Definition for DC-HSUPA . 15 4.2.3.2.2 Limits for DC-HSUPA . 15 4.2.3.2.3 Conformance . 15 4.2.4 Transmitter spurious emissions . 15 4.2.4.1 Transmitter spurious emissions . 15 4.2.4.1.1 Definition. 15 4.2.4.1.2 Limits . 15 4.2.4.1.3 Conformance . 17 4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 17 4.2.4.2.1 Definition for DC-HSUPA . 17 4.2.4.2.2 Limits for DC-HSUPA . 17 4.2.4.2.3 Conformance . 19 4.2.5 Transmitter minimum output power . 20 4.2.5.1 Transmitter minimum output power. 20 4.2.5.1.1 Definition. 20 4.2.5.1.2 Limits . 20 4.2.5.1.3 Conformance . 20 4.2.5.2 Transmitter minimum output power for DC-HSUPA . 20 4.2.5.2.1 Definition for DC-HSUPA . 20 4.2.5.2.2 Limits for DC-HSUPA . 20 4.2.5.2.3 Conformance . 20 4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 20 4.2.6.1 Definition . 20 SIST EN 301 908-2 V6.2.1:2014
ETSI ETSI EN 301 908-2 V6.2.1 (2013-10) 4 4.2.6.2 Limits . 21 4.2.6.3 Conformance . 21 4.2.7 Receiver blocking characteristics . 21 4.2.7.1 Definition . 21 4.2.7.2 Limits . 21 4.2.7.3 Conformance . 23 4.2.8 Receiver spurious response . 23 4.2.8.1 Definition . 23 4.2.8.2 Limits . 23 4.2.8.3 Conformance . 24 4.2.9 Receiver intermodulation characteristics . 24 4.2.9.1 Definition . 24 4.2.9.2 Limits . 24 4.2.9.3 Conformance . 25 4.2.10 Receiver spurious emissions . 25 4.2.10.1 Definition . 25 4.2.10.2 Limits . 25 4.2.10.3 Conformance . 27 4.2.11 Out-of-synchronization handling of output power . 27 4.2.11.1 Definition . 27 4.2.11.2 Limits . 27 4.2.11.3 Conformance . 28 4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 28 4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 28 4.2.12.1.1 Definition. 28 4.2.12.1.2 Limits . 28 4.2.12.1.3 Conformance . 29 4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 29 4.2.12.2.1 Definition for DC-HSUPA . 29 4.2.12.2.2 Limits for DC-HSUPA . 29 4.2.12.2.3 Conformance . 29 5 Testing for compliance with technical requirements . 29 5.1 Environmental conditions for testing . 29 5.2 Interpretation of the measurement results . 30 5.3 Essential radio test suites . 31 5.3.1 Transmitter maximum output power. 31 5.3.1.1 Method of test . 31 5.3.1.1.1 Initial conditions . 31 5.3.1.1.1A Initial conditions for DC-HSUPA . 31 5.3.1.1.2 Procedure . 32 5.3.1.1.2A Procedure for DC-HSUPA . 32 5.3.1.2 Test requirements . 32 5.3.2 Transmitter spectrum emission mask . 32 5.3.2.1 Method of test . 32 5.3.2.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 32 5.3.2.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 32 5.3.2.1.1B Initial conditions for DC-HSUPA . 33 5.3.2.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 33 5.3.2.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 33 5.3.2.1.2B Procedure for DC-HSUPA . 33 5.3.2.2 Test requirements . 33 5.3.3 Transmitter spurious emissions . 34 5.3.3.1 Method of test . 34 5.3.3.1.1 Initial conditions . 34 5.3.3.1.1A Initial conditions for DC-HSUPA . 34 5.3.3.1.2 Procedure . 34 5.3.3.1.2A Procedure for DC-HSUPA . 34 5.3.3.2 Test requirements . 34 5.3.4 Transmitter minimum output power . 35 5.3.4.1 Method of test . 35 5.3.4.1.1 Initial conditions . 35 SIST EN 301 908-2 V6.2.1:2014
ETSI ETSI EN 301 908-2 V6.2.1 (2013-10) 5 5.3.4.1.1A Initial conditions for DC-HSUPA . 35 5.3.4.1.2 Procedure . 35 5.3.4.1.2A Procedure for DC-HSUPA . 35 5.3.4.2 Test requirements . 35 5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 36 5.3.5.1 Method of test . 36 5.3.5.1.1 Initial conditions . 36 5.3.5.1.2 Procedure . 36 5.3.5.2 Test requirements . 36 5.3.6 Receiver blocking characteristics . 36 5.3.6.1 Method of test . 36 5.3.6.1.1 Initial requirements . 36 5.3.6.1.2 Procedure . 37 5.3.6.2 Test requirements . 37 5.3.7 Receiver spurious response . 37 5.3.7.1 Method of test . 37 5.3.7.1.1 Initial conditions . 37 5.3.7.1.2 Procedure . 37 5.3.7.2 Test requirements . 37 5.3.8 Receiver Intermodulation characteristics . 37 5.3.8.1 Method of test . 37 5.3.8.1.1 Initial conditions . 37 5.3.8.1.2 Procedure . 38 5.3.8.2 Test requirements . 38 5.3.9 Receiver spurious emissions . 38 5.3.9.1 Method of test . 38 5.3.9.1.1 Initial conditions . 38 5.3.9.1.2 Procedure . 38 5.3.9.2 Test requirements . 38 5.3.10 Out-of-synchronization handling of output power . 38 5.3.10.1 Method of test . 38 5.3.10.1.1 Initial conditions . 38 5.3.10.1.2 Procedure . 39 5.3.10.2 Test requirements . 39 5.3.11 Transmitter adjacent channel leakage power ratio . 39 5.3.11.1 Method of test . 39 5.3.11.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 39 5.3.11.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 40 5.3.11.1.1B Initial conditions for DC-HSUPA . 40 5.3.11.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 40 5.3.11.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 40 5.3.11.1.2B Procedure for DC-HSUPA . 40 5.3.11.2 Test requirements . 40 Annex A (normative): HS Requirements and conformance Test specifications Table (HS-RTT) . 41 Annex B (normative): Environmental profile . 43 B.1 General . 43 B.1.1 Introduction . 43 B.1.2 Temperature . 43 B.1.3 Voltage . 43 B.1.4 Test environment . 43 Annex C: Void . 45 Annex D (informative): Bibliography . 46 History . 47
SIST EN 301 908-2 V6.2.1:2014
ETSI ETSI EN 301 908-2 V6.2.1 (2013-10) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). The present d
...
Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
Harmonized European Standard
IMT cellular networks;
Harmonized EN covering the essential requirements
of article 3.2 of the R&TTE Directive;
Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
---------------------- Page: 1 ----------------------
2 Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
Reference
REN/MSG-TFES-010-02
Keywords
3G, 3GPP, cellular, digital, IMT, mobile, radio,
regulation, UMTS, UTRA, WCDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2013.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
Contents
Intellectual Property Rights . 6
Foreword . 6
Introduction . 6
1 Scope . 7
2 References . 8
2.1 Normative references . 8
2.2 Informative references . 8
3 Definitions, symbols and abbreviations . 9
3.1 Definitions . 9
3.2 Symbols . 10
3.3 Abbreviations . 10
4 Technical requirements specifications . 12
4.1 Environmental profile . 12
4.2 Conformance requirements . 12
4.2.1 Introduction. 12
4.2.2 Transmitter maximum output power. 12
4.2.2.1 Transmitter maximum output power . 12
4.2.2.1.1 Definition. 12
4.2.2.1.2 Limits . 13
4.2.2.1.3 Conformance. . 13
4.2.2.2 Transmitter maximum output power for DC-HSUPA . 13
4.2.2.2.1 Definition for DC-HSUPA . 13
4.2.2.2.2 Limits for DC-HSUPA . 13
4.2.2.2.3 Conformance. . 14
4.2.3 Transmitter spectrum emission mask . 14
4.2.3.1 Transmitter spectrum emission mask . 14
4.2.3.1.1 Definition. 14
4.2.3.1.2 Limits . 14
4.2.3.1.3 Conformance . 14
4.2.3.2 Transmitter spectrum emission mask for DC-HSUPA . 15
4.2.3.2.1 Definition for DC-HSUPA . 15
4.2.3.2.2 Limits for DC-HSUPA . 15
4.2.3.2.3 Conformance . 15
4.2.4 Transmitter spurious emis sions . 15
4.2.4.1 Transmitter spurious emissions . 15
4.2.4.1.1 Definition. 15
4.2.4.1.2 Limits . 15
4.2.4.1.3 Conformance . 17
4.2.4.2 Transmitter spurious emissions for DC-HSUPA . 17
4.2.4.2.1 Definition for DC-HSUPA . 17
4.2.4.2.2 Limits for DC-HSUPA . 17
4.2.4.2.3 Conformance . 19
4.2.5 Transmitter minimum output power . 20
4.2.5.1 Transmitter minimum output power. 20
4.2.5.1.1 Definition. 20
4.2.5.1.2 Limits . 20
4.2.5.1.3 Conformance . 20
4.2.5.2 Transmitter minimum output power for DC-HSUPA . 20
4.2.5.2.1 Definition for DC-HSUPA . 20
4.2.5.2.2 Limits for DC-HSUPA . 20
4.2.5.2.3 Conformance . 20
4.2.6 Receiver Adjacent Channel Selectivity (ACS) . 20
4.2.6.1 Definition . 20
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
4.2.6.2 Limits . 21
4.2.6.3 Conformance . 21
4.2.7 Receiver blocking characteristics . 21
4.2.7.1 Definition . 21
4.2.7.2 Limits . 21
4.2.7.3 Conformance . 23
4.2.8 Receiver spurious response . 23
4.2.8.1 Definition . 23
4.2.8.2 Limits . 23
4.2.8.3 Conformance . 24
4.2.9 Receiver intermodulation characteristics . 24
4.2.9.1 Definition . 24
4.2.9.2 Limits . 24
4.2.9.3 Conformance . 25
4.2.10 Receiver spurious emissions . 25
4.2.10.1 Definition . 25
4.2.10.2 Limits . 25
4.2.10.3 Conformance . 27
4.2.11 Out-of-synchronization handling of output power . 27
4.2.11.1 Definition . 27
4.2.11.2 Limits . 27
4.2.11.3 Conformance . 28
4.2.12 Transmitter Adjacent Channel Leakage power Ratio (ACLR) . 28
4.2.12.1 Transmitter adjacent channel leakage power ratio (ACLR) . 28
4.2.12.1.1 Definition. 28
4.2.12.1.2 Limits . 28
4.2.12.1.3 Conformance . 29
4.2.12.2 Adjacent channel leakage power ratio for DC-HSUPA . 29
4.2.12.2.1 Definition for DC-HSUPA . 29
4.2.12.2.2 Limits for DC-HSUPA . 29
4.2.12.2.3 Conformance . 29
5 Testing for compliance with technical requirements . 29
5.1 Environmental conditions for testing . 29
5.2 Interpretation of the measurement results . 30
5.3 Essential radio test suites . 31
5.3.1 Transmitter maximum output power. 31
5.3.1.1 Method of test . 31
5.3.1.1.1 Initial conditions . 31
5.3.1.1.1A Initial conditions for DC-HSUPA . 31
5.3.1.1.2 Procedure . 32
5.3.1.1.2A Procedure for DC-HSUPA . 32
5.3.1.2 Test requirements . 32
5.3.2 Transmitter spectrum emission mask . 32
5.3.2.1 Method of test . 32
5.3.2.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 32
5.3.2.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 32
5.3.2.1.1B Initial conditions for DC-HSUPA . 33
5.3.2.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 33
5.3.2.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 33
5.3.2.1.2B Procedure for DC-HSUPA . 33
5.3.2.2 Test requirements . 33
5.3.3 Transmitter spurious emis sions . 34
5.3.3.1 Method of test . 34
5.3.3.1.1 Initial conditions . 34
5.3.3.1.1A Initial conditions for DC-HSUPA . 34
5.3.3.1.2 Procedure . 34
5.3.3.1.2A Procedure for DC-HSUPA . 34
5.3.3.2 Test requirements . 34
5.3.4 Transmitter minimum output power . 35
5.3.4.1 Method of test . 35
5.3.4.1.1 Initial conditions . 35
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
5.3.4.1.1A Initial conditions for DC-HSUPA . 35
5.3.4.1.2 Procedure . 35
5.3.4.1.2A Procedure for DC-HSUPA . 35
5.3.4.2 Test requirements . 35
5.3.5 Receiver Adjacent Channel Selectivity (ACS) . 36
5.3.5.1 Method of test . 36
5.3.5.1.1 Initial conditions . 36
5.3.5.1.2 Procedure . 36
5.3.5.2 Test requirements . 36
5.3.6 Receiver blocking characteristics . 36
5.3.6.1 Method of test . 36
5.3.6.1.1 Initial requirements . 36
5.3.6.1.2 Procedure . 37
5.3.6.2 Test requirements . 37
5.3.7 Receiver spurious response . 37
5.3.7.1 Method of test . 37
5.3.7.1.1 Initial conditions . 37
5.3.7.1.2 Procedure . 37
5.3.7.2 Test requirements . 37
5.3.8 Receiver Intermodulation characteristics . 37
5.3.8.1 Method of test . 37
5.3.8.1.1 Initial conditions . 37
5.3.8.1.2 Procedure . 38
5.3.8.2 Test requirements . 38
5.3.9 Receiver spurious emissions . 38
5.3.9.1 Method of test . 38
5.3.9.1.1 Initial conditions . 38
5.3.9.1.2 Procedure . 38
5.3.9.2 Test requirements . 38
5.3.10 Out-of-synchronization handling of output power . 38
5.3.10.1 Method of test . 38
5.3.10.1.1 Initial conditions . 38
5.3.10.1.2 Procedure . 39
5.3.10.2 Test requirements . 39
5.3.11 Transmitter adjacent channel leakage power ratio . 39
5.3.11.1 Method of test . 39
5.3.11.1.1 Initial conditions for UEs not supporting HSDPA and/or E-DCH . 39
5.3.11.1.1A Initial conditions for UEs supporting HSDPA and/or E-DCH . 40
5.3.11.1.1B Initial conditions for DC-HSUPA . 40
5.3.11.1.2 Procedure for UEs not supporting HSDPA and/or E-DCH . 40
5.3.11.1.2A Procedure for UEs supporting HSDPA and/or E-DCH . 40
5.3.11.1.2B Procedure for DC-HSUPA . 40
5.3.11.2 Test requirements . 40
Annex A (normative): HS Requirements and conformance Test specifications Table
(HS-RTT) . 41
Annex B (normative): Environmental profile . 44
B.1 General . 44
B.1.1 Introduction . 44
B.1.2 Temperature . 44
B.1.3 Voltage . 44
B.1.4 Test environment . 44
Annex C: Void . 46
Annex D (informative): Bibliography . 47
History . 48
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI EN 301 908-2 V6.1.3 (2013-08)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This final draft Harmonized European Standard (EN) has been produced by ETSI Technical Committee Mobile
Standards Group (MSG), and is now submitted for the Vote phase of the ETSI standards EN Approval Procedure.
The present document has been produced by ETSI in response to manda
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.