SIST EN 300 356-3 V3.1.3:2003

• Abstract:

  Additional generic procedures to those in basic call for use in this supplementary service.

• Status: Published
• Publication Date: 30-Nov-2003
• ICS: 33.080 - Integrated Services Digital Network (ISDN)
• Technical Committee: SS EIT - Technical Board for the electrotechnical, information technology and telecommunications fields
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Dec-2003
• Due Date: 01-Dec-2003
• Completion Date: 01-Dec-2003
• Ref Project: ETSI EN 300 356-3 V3.1.3 (1998-08) - Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 3: Calling Line Identification Presentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993), modified]

SIST EN 300 356-3 V3.1.3:2003 is the Slovenian adoption of EN 300 356-3 V3.1.3, an ETSI European Standard for Integrated Services Digital Network (ISDN) signalling on the international interface. It specifies the stage 3 procedures and switching functions for the Calling Line Identification Presentation (CLIP) supplementary service, so it is aimed at people implementing, testing, or buying equipment for international ISDN interconnection.

What does SIST EN 300 356-3 V3.1.3:2003 specify?

SIST EN 300 356-3 V3.1.3:2003 specifies additional generic procedures for the CLIP supplementary service beyond the basic call. In practice, it tells network and switching implementers how CLIP is handled in the signalling system, not how the user service is described at a high level.

This part belongs to the EN 300 356 series for ISUP version 3. The foreword places it in a multi-part structure, and the modified clause 3 adds a Scope and Normative references section at the start.

Annex	What it covers
ZA (informative)	Coding of the compatibility information for the generic number parameter

What are the key requirements of SIST EN 300 356-3 V3.1.3:2003?

Stage 3 scope and service behavior

SIST EN 300 356-3 V3.1.3:2003 defines the stage 3 aspects of CLIP for the pan-European ISDN using Signalling System No.7 (SS7) and the ISDN User Part (ISUP). Stage 3 means the document focuses on protocol procedures and switching functions, so implementers use it when they need to build or verify network behaviour.

The standard says CLIP gives the called party the possibility to receive the identification of the calling party. It also says CLIP is applicable to all telecommunication services, which matters when checking whether the service must be offered across different call types.

Network boundaries and interworking

SIST EN 300 356-3 V3.1.3:2003 applies to the international interface. It does not specify additional protocol requirements for delivery over a non-ISDN network or for the national signalling interface, so national and international implementations need to be separated carefully.

The text keeps the functions, formats, codes, and actions at originating and destination local exchanges. It also notes that formats, codes, and procedures marked for national use are included for informative purposes for the international interface specification, and if they are supported in a national or operator network, they should be supported in that manner.

Reference alignment

SIST EN 300 356-3 V3.1.3:2003 replaces several references in ITU-T Recommendation Q.731, clause 3, with ETSI documents or ETSI-modified ENs. This matters because implementers are expected to follow the ETSI versions named in the document, not the older generic references.

Annex ZA coding note

Annex ZA gives recommended coding for the compatibility information of the generic number parameter. In practice, this annex is used when implementing message compatibility handling and number-related interworking, especially at gateway exchanges.

What terms does SIST EN 300 356-3 V3.1.3:2003 define?

• Integrated Services Digital Network (ISDN) - the digital network context for the service and signalling described in the standard.
• Signalling System No.7 (SS7) - the signalling system used to carry ISUP on the international interface.
• ISDN User Part (ISUP) - the SS7 protocol part used for ISDN call control and supplementary services.
• Calling Line Identification Presentation (CLIP) - the supplementary service that lets the called party receive the identity of the calling party.
• Digital Subscriber Signalling System No. one (DSS1) - the ISDN access signalling protocol named in the normative references.
• Stage 3 - the level that defines signalling system protocols and switching functions needed to implement the service.

Who uses SIST EN 300 356-3 V3.1.3:2003?

SIST EN 300 356-3 V3.1.3:2003 is used by public telecommunications operators, switch and signalling equipment suppliers, and engineers responsible for international ISDN interconnection. It is also relevant to test and conformance teams that need to verify CLIP behaviour, parameter coding, and gateway interworking.

What changed in SIST EN 300 356-3 V3.1.3:2003 from the previous edition?

SIST EN 300 356-3 V3.1.3:2003 is the August 1998 publication of EN 300 356-3 Version 3.1.3. The document history lists earlier publications as ETS 300 356-3 V3.1.1 and V3.1.2, and the text states that ITU-T Recommendation Q.731, clause 3 (1993), was approved as an EN with agreed modifications.

Which standards are used with SIST EN 300 356-3 V3.1.3:2003?

Reference	What it contributes
CCITT Recommendation I.130	Method for characterizing telecommunication services supported by an ISDN and network capabilities
ETS 300 089	CLIP service description
ETS 300 091	CLIP and CLIR functional capabilities and information flows
ETS 300 092-1	CLIP protocol specification for DSS1
ETS 300 121	ISUP version 1 for international ISDN interconnections
EN 300 356-1	ISUP version 3 basic services
EN 300 356-2	ISUP version 3 supplementary services
EN 300 403-1	DSS1 signalling network layer for circuit-mode basic call control

What does the SIST EN 300 356-3 V3.1.3:2003 document contain?

The document contains the CLIP stage 3 scope text, a normative references section, and global modifications to ITU-T Recommendation Q.731, clause 3. It also contains a reference replacement table that maps older ITU-T references to ETSI documents and ENs used in this standard.

Annex ZA provides the compatibility-information coding guidance for the generic number parameter. The document also includes the ETSI foreword, IPR notice, national transposition dates, and publication history, which help users understand the status and lineage of the standard.

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Integrated Services Digital Network (ISDN); Signalling System No.7; ISDN User Part (ISUP) version 3 for the international interface; Part 3: Calling Line Identification Presentation (CLIP) supplementary service [ITU-T Recommendation Q.731, clause 3 (1993), modified]33.080Digitalno omrežje z integriranimi storitvami (ISDN)Integrated Services Digital Network (ISDN)ICS:Ta slovenski standard je istoveten z:EN 300 356-3 Version 3.1.3SIST EN 300 356-3 V3.1.3:2003en01-december-2003SIST EN 300 356-3 V3.1.3:2003SLOVENSKI
STANDARD
EN 300 356-3 V3.1.3 (1998-08)European Standard (Telecommunications series)Integrated Services Digital Network (ISDN);Signalling System No.7;ISDN User Part (ISUP) version 3 for the international interface;Part 3: Calling Line Identification Presentation (CLIP)supplementary service[ITU-T Recommendation Q.731, clause 3 (1993), modified]SIST EN 300 356-3 V3.1.3:2003

ETSIEN 300 356-3 V3.1.3 (1998-08)2ReferenceREN/SPS-01039-3 (3aor1ie0.PDF)KeywordsISDN, ISUP, SS7, supplementary service, CLIPETSIPostal addressF-06921 Sophia Antipolis Cedex - FRANCEOffice address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: [phone]
Fax: [phone]Siret N° 348 623 562 00017 - NAF 742 CAssociation à but non lucratif enregistrée à laSous-Préfecture de Grasse (06) N° 7803/[e-mail]://www.etsi.frhttp://www.etsi.orgCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1998.All rights reserved.SIST EN 300 356-3 V3.1.3:2003

ETSIEN 300 356-3 V3.1.3 (1998-08)3Intellectual Property RightsIPRs essential or potentially essential to the present document may have been declared to ETSI. The informationpertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be foundin SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respectof ETSI standards", which is available free of charge from the ETSI Secretariat. Latest updates are available on theETSI Web server (http://www.etsi.fr/ipr or http://www.etsi.org/ipr).Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guaranteecan be given as to the existence of other IPRs not referenced in SR 000 314 (or the updates on the ETSI Web server)which are, or may be, or may become, essential to the present document.ForewordThis European Standard (Telecommunications series) has been produced by ETSI Technical Committee SignallingProtocols and Switching (SPS).The present document is part 3 of a multi-part EN covering the ISDN User Part (ISUP) version 3 for the internationalinterface, as identified below:Part 1:"Basic services";Part 2:"ISDN supplementary services";Part 3:"Calling Line Identification Presentation (CLIP) supplementary service";Part 4:"Calling Line Identification Restriction (CLIR) supplementary service";Part 5:"Connected Line Identification Presentation (COLP) supplementary service";Part 6:"Connected Line Identification Restriction (COLR) supplementary service";Part 7:"Terminal Portability (TP) supplementary service";Part 8:"User-to-User Signalling (UUS) supplementary service";Part 9:"Closed User Group (CUG) supplementary service";Part 10:"Subaddressing (SUB) supplementary service";Part 11:"Malicious Call Identification (MCID) supplementary service";Part 12:"Conference Call, add-on (CONF) supplementary service";Part 14:"Explicit Call Transfer (ECT) supplementary service";Part 15:"Diversion supplementary services";Part 16:"Call Hold (HOLD) supplementary service";Part 17:"Call Waiting (CW) supplementary service";Part 18:"Completion of Calls to Busy Subscriber (CCBS) supplementary service";Part 19:"Three party (3PTY) supplementary service".Part 20:"Completion of Calls on No Reply (CCNR) supplementary service";Part 31:"Protocol Implementation Conformance Statement (PICS) proforma specification for basic services"Part 32:"Test Suite Structure and Test Purposes (TSS&TP) specification for basic services"Part 33:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for basic services"Part 34:"Protocol Implementation Conformance Statement (PICS) proforma specification for supplementaryservices"Part 35:"Test Suite Structure and Test Purposes (TSS&TP) specification for supplementary services"Part 36:"Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT)proforma specification for supplementary services"NOTE:Part 13 has not been issued.SIST EN 300 356-3 V3.1.3:2003

ETSIEN 300 356-3 V3.1.3 (1998-08)4In accordance with CCITT Recommendation I.130, the following three level structure is used to describe thesupplementary telecommunication services as provided by European public telecommunications operators under thepan-European Integrated Services Digital Network (ISDN):-Stage 1: is an overall service description, from the user's stand-point;-Stage 2: identifies the functional capabilities and information flows needed to support the service described instage 1; and-Stage 3: defines the signalling system protocols and switching functions needed to implement the servicedescribed in stage 1.The present document details the stage three aspects (signalling system protocols and switching functions) needed tosupport the Calling Line Identification Presentation (CLIP) supplementary service. The stage 1 and stage 2 aspects aredetailed in ETS 300 089 and ETS 300 091, respectively.National transposition datesDate of adoption of this EN:7 August 1998Date of latest announcement of this EN (doa):30 November 1998Date of latest publication of new National Standardor endorsement of this EN (dop/e):31 May 1999Date of withdrawal of any conflicting National Standard (dow):31 May 1999Endorsement noticeThe text of ITU-T Recommendation Q.731, clause 3 (1993), was approved by ETSI as an EN with agreed modificationsas given below.NOTE:New or modified text is indicated using sidebars. In addition, underlining and/or strike-out are used tohighlight det
...