SIST EN 301 908-4 V2.2.1:2004
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive
The second release of EN 301 908 will include BS Classification, Spurious Emissions, Unwanted Emissions, Low Chip Rate, High Speed Packet Access, Repeaters.
Elektromagnetna združljivost (EMC) in zadeve v zvezi z radijskim spektrom (ERM) - Bazne postaje (BS) in uporabniška oprema (UE) za celična omrežja tretje generacije IMT-2000 - 4. del: Harmonizirani EN za IMT-2000, CDMA “Multi-Carrier” (CDMA2000) (UE), ki zajema bistvene zahteve člena 3.2 direktive R&TTE
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.WUHWMH³0XOWLElectromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks; Part 4: Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.99Druga oprema za radijske komunikacijeOther equipment for radiocommunicationsICS:Ta slovenski standard je istoveten z:EN 301 908-4 Version 2.2.1SIST EN 301 908-4 V2.2.1:2004en01-julij-2004SIST EN 301 908-4 V2.2.1:2004SLOVENSKI
STANDARD
SIST EN 301 908-4 V2.2.1:2004
ETSI EN 301 908-4 V2.2.1 (2003-10)Candidate Harmonized European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Base Stations (BS), Repeaters and User Equipment (UE) forIMT-2000 Third-Generation cellular networks;Part 4: Harmonized EN for IMT-2000,CDMA Multi-Carrier (cdma2000) (UE)covering essential requirementsof article 3.2 of the R&TTE Directive
SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 2
Reference REN/ERM-TFES-002-4 Keywords 3G, 3GPP2, CDMA2000, cellular, digital,
IMT-2000, mobile, radio, regulation, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2003. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 3
Contents Intellectual Property Rights.6 Foreword.6 Introduction.8 1 Scope.10 2 References.10 3 Definitions, symbols and abbreviations.11 3.1 Definitions.11 3.2 Symbols.20 3.3 Abbreviations.23 4 Technical requirements specifications.24 4.1 Environmental profile.24 4.2 Conformance requirements.24 4.2.1 Introduction.24 4.2.2 Conducted spurious emissions when transmitting.25 4.2.2.1 Definition.25 4.2.2.2 Limits.25 4.2.2.2.1 Mobile stations operating in type 1 cdma2000 systems using spreading rate 1 or operating in type 2 cdma2000 systems.25 4.2.2.2.2 Mobile stations operating in type 1 cdma2000 systems using spreading rate 3.26 4.2.2.3 Conformance.26 4.2.3 Maximum RF output power.27 4.2.3.1 Definition.27 4.2.3.2 Limits.27 4.2.3.3 Conformance.27 4.2.4 Minimum controlled output power.27 4.2.4.1 Definition.27 4.2.4.2 Limits.28 4.2.4.3 Conformance.28 4.2.5 Conducted spurious emissions when not transmitting.28 4.2.5.1 Definition.28 4.2.5.2 Limits.28 4.2.5.3 Conformance.28 4.2.6 Receiver blocking characteristics.28 4.2.6.1 Definition.28 4.2.6.2 Limits.29 4.2.6.2.1 Mobile station operating in type 1 cdma2000 systems.29 4.2.6.2.2 Mobile station operating in type 2 cdma2000 systems.29 4.2.6.3 Conformance.29 4.2.7 Intermodulation spurious response attenuation.29 4.2.7.1 Definition.29 4.2.7.2 Limits.29 4.2.7.2.1 Mobile station operating in type 1 cdma2000 systems.29 4.2.7.2.2 Mobile stations operating in type 2 cdma2000 systems.29 4.2.7.3 Conformance.29 4.2.8 Adjacent channel selectivity.30 4.2.8.1 Definition.30 4.2.8.2 Limits.30 4.2.8.2.1 Mobile station operating in type 1 cdma2000 systems.30 4.2.8.2.2 Mobile station operating in type 2 cdma2000 systems.30 4.2.8.3 Conformance.30 4.2.9 Supervision of paging channel or Forward Common Control Channel.30 4.2.9.1 Definition.30 4.2.9.2 Limits.30 SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 4
4.2.9.3 Conformance.30 4.2.10 Supervision of forward traffic channel.31 4.2.10.1 Definition.31 4.2.10.2 Limits.31 4.2.10.3 Conformance.31 4.2.11 Supervision of control channel.31 4.2.11.1 Definition.31 4.2.11.2 Limits.32 4.2.11.3 Conformance.32 4.2.12 Supervision procedures in variable rate state.32 4.2.12.1 Definition.32 4.2.12.2 Limits.32 4.2.12.3 Conformance.33 5 Testing for compliance with technical requirements.33 5.1 Conditions for testing.33 5.1.1 Introduction.33 5.1.2 Standard equipment under test.33 5.1.2.1 Basic equipment.33 5.1.2.2 Ancillary equipment.33 5.2 Interpretation of the measurement results.33 5.3 Essential radio test suites.34 5.3.1 Conducted spurious emissions when transmitting.34 5.3.1.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.34 5.3.1.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.36 5.3.2 Maximum RF output power.36 5.3.2.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.36 5.3.2.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.39 5.3.3 Minimum controlled output power.40 5.3.3.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.40 5.3.3.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.40 5.3.4 Conducted spurious emissions when not transmitting.41 5.3.4.1 Test procedure for mobile stations supporting operation in type 1 and/or type 2 cdma2000 systems.41 5.3.5 Receiver blocking characteristics.41 5.3.5.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.41 5.3.5.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.42 5.3.6 Intermodulation spurious response attenuation.43 5.3.6.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.43 5.3.6.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.44 5.3.7 Adjacent channel selectivity.45 5.3.7.1 Test procedure for mobile stations supporting operation in type 1 cdma2000 systems.45 5.3.7.2 Test procedure for mobile stations supporting operation in type 2 cdma2000 systems.46 5.3.8 Supervision of paging channel or Forward Common Control Channel.47 5.3.9 Supervision of forward traffic channel.48 5.3.10 Supervision of control channel.49 5.3.11 Supervision procedures in variable rate state.50 Annex A (normative): EN Requirements Table (EN-RT).51 Annex B (informative): Environmental profile and standard test conditions.53 B.1 Introduction.53 B.2 CDMA environmental requirements.53 B.2.1 Temperature and power supply voltage.53 B.2.1.1 Definition.53 B.2.1.2 Method of measurement.53 B.2.1.3 Minimum standard.54 B.2.2 High humidity.54 B.2.2.1 Definition.54 B.2.2.2 Method of measurement.54 B.2.2.3 Minimum standard.54 SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 5
B.2.3 Vibration stability.55 B.2.3.1 Definition.55 B.2.3.2 Method of measurement.55 B.2.3.3 Minimum standard.55 B.2.4 Shock stability.55 B.2.4.1 Definition.55 B.2.4.2 Method of measurement.55 B.2.4.3 Minimum standard.55 B.3 Standard test conditions.55 B.3.1 Standard environmental test conditions.55 B.3.2 Standard conditions for the primary power supply.56 B.3.2.1 General.56 B.3.2.2 Standard DC test voltage from accumulator batteries.56 B.3.2.3 Standard AC voltage and frequency.56 Annex C (informative): Bibliography.57 Annex D (informative): The EN title in the official languages.58 History.59
SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive"). The present document is part 4 of a multi-part deliverable covering the Base Stations (BS), repeaters and User Equipment (UE) for IMT-2000 Third-Generation cellular networks, as identified below: Part 1: "Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive"; Part 2: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 3: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 4: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 5: "Harmonized EN for IMT-2000, CDMA Multi-Carrier (cdma2000) (BS and Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 6: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 7: "Harmonized EN for IMT-2000, CDMA TDD (UTRA TDD) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 8: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (UE) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 9: "Harmonized EN for IMT-2000, TDMA Single-Carrier (UWC 136) (BS) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 10: "Harmonized EN for IMT-2000 FDMA/TDMA (DECT) covering essential requirements of article 3.2 of the R&TTE Directive"; Part 11: "Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (Repeaters) covering essential requirements of article 3.2 of the R&TTE Directive". SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 7
Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A.
National transposition dates Date of adoption of this EN: 3 October 2003 Date of latest announcement of this EN (doa): 31 January 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 July 2004 Date of withdrawal of any conflicting National Standard (dow): 31 January 2006
SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 8
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
- If needed, new standards for human exposure to Electromagnetic Fields, - if needed, new standards for acoustic safety Use of spectrum * If needed Scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Inter-working via
the network* Inter-working with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety EN 301 489 multi-part EMC standard
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 301 908-4 V2.2.1:2004
ETSI ETSI EN 301 908-4 V2.2.1 (2003-10) 9
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted, and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b, figure 1 shows EN 301 489 [9], the multi-part product EMC standard for radio used under the EMC Directive [2]. For article 3.1a, figure 1 shows the existing safety standards currently used under the LV Directive [3] and new standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be required. The bottom of figure 1 shows the relationship of the standards to radio equipment and telecommunications terminal equipment. Particular equipment may be radio equipment, telecommunications terminal equipment or both. A radio spectrum standard will apply if it is radio equipment. An article 3.3 standard will apply as well only if the relevant essential requirement under the R&TTE Directive [1] is adopted by the Commission and if the equipment in question is covered by the scope of the corresponding standard. Thus, depending on the nature of the equipment, the essential requirements under the R&TTE Directive [1] may be covered in a set of standards. The modularity principle has been taken because: • It minimizes the number of standards needed. Because equipment may, in fact, have multiple interfaces and functions it is not practicable to produce a single standard for each possible combination of functions that may occur in equipment. • It provides scope for standards to be added: - under article 3.2 when new frequency bands are agreed; or - under article 3.3 should the Commission take the necessary decisions without requiring alteration of standards that are already published. • It clarifies, simplifies and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.