SIST EN 13286-3:2004

Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters

This European Standard specifies a method for the determination of the maximum reference dry bulk density and the difficulty of compaction of a hydraulically bound or unbound mixture using a compacting machine called "controlled parameters vibro compression" (CPVC). This European Standard applies to unbound mixtures as well as to mixtures bound with hydraulically binders before setting. This method is applicable to mixture with a maximum size aggregate D equal to 31,5 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 3: Laborprüfverfahren für die Trockendichte und den Wassergehalt - Vibrationsverdichtung mit vertikalem Druck

Diese Europäische Norm legt ein Verfahren fest, mit dem die Trockendichte, der Wassergehalt und die Verdichtbarkeit ungebundener oder hydraulisch gebundener Gemische unter Anwendung einer Vibrationsverdichtung mit vertikalem Druck (Rütteldruckverdichtung) bestimmt wird.
Diese Europäische Norm gilt für ungebundene Gemische und für Gemische mit hydraulischen Bindemitteln vor dem Aushärten.
Das Verfahren ist auf Gemische mit einem Größtkorn D = 31,5 mm anwendbar.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 3: Méthodes d'essai de détermination en laboratoire de la masse volumique de référence et la teneur en eau - Vibrocompression a parametres contrôlés

La présente Norme européenne spécifie une méthode pour la détermination en laboratoire de la masse volumique seche, de la teneur en eau et de la difficulté de compactage d'un mélange non traité ou d'un mélange traité aux liants hydrauliques.
Cette Norme européenne s'applique aux mélanges non traités et également aux  mélanges traités aux liants hydrauliques avant mise en ?uvre.
La méthode est applicable aux mélanges dont la dimension granulaire D est au maximum de 31,5 mm.

Nevezane in hidravlično vezane zmesi – 3. del: Preskusne metode za laboratorijsko referenčno gostoto in vsebnost vode – Vibracijsksa obremenitev z nadzorovanimi parametri

General Information

• Status: Published
• Publication Date: 31-May-2004
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jun-2004
• Due Date: 01-Jun-2004
• Completion Date: 01-Jun-2004
• Directive: 89/106/EEC - Construction products
• Ref Project: EN 13286-3:2003 - Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DUngebundene und hydraulisch gebundene Gemische - Teil 3: Laborprüfverfahren für die Trockendichte und den Wassergehalt - Vibrationsverdichtung mit vertikalem DruckMélanges traités et mélanges non traités aux liants hydrauliques - Partie 3: Méthodes d'essai de détermination en laboratoire de la masse volumique de référence et la teneur en eau - Vibrocompression a parametres contrôlésUnbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-3:2003SIST EN 13286-3:2004en01-junij-2004SIST EN 13286-3:2004SLOVENSKI
STANDARD



SIST EN 13286-3:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-3March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 3: Testmethods for laboratory reference density and water content -Vibrocompression with controlled parametersMélanges traités et mélanges non traités aux liantshydraulique - Partie 3: Méthodes d'essai pour la massevolumique de référence et la teneur en eau en laboratoire -Compactage à paramètres controlésUngebundene und hydraulisch gebundene Gemische - Teil3: Laborprüfverfahren für die Trockendichte und denWassergehalt - Vibrationsverdichtung mit vertikalem DruckThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-3:2003 ESIST EN 13286-3:2004



EN 13286-3:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.55Apparatus.56Preparation of the mixture.77Procedure.78Calculation of rR and the difficulty of compaction DC(w).89Test report.810Precision.9Annex A (informative)
Assessment of the difficulty compaction class.10SIST EN 13286-3:2004



EN 13286-3:2003 (E)3ForewordThis document (EN 13286-3:2003) has been prepared by Technical Committee CEN/TC 227 "Road Materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by December 2003.This European Standard is one of a series of standards as follows:EN 13286-1, Unbound and hydraulically bound mixtures – Part 1: Test methods for laboratory reference densityand water content – Introduction, general requirements and sampling.prEN 13286-2, Unbound and hydraulically bound mixtures – Part 2: Test methods for laboratory reference densityand water content – Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures – Part 3: Test methods for laboratory reference densityand water content – Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures – Part 4: Test methods for laboratory reference densityand water content – Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures – Part 5: Test methods for laboratory reference densityand water content – Vibrating table.prEN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for unbound mixtures.EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test methods for the determination of thecompressive of strength of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the determination of themodulus of elasticity of hydraulically bound mixtures.prEN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the determination of thealpha coefficient of vitrified blastfurnace slag.prEN 13286-45, Unbound and hydraulically bound mixtures — Part 45: Test method for the determination of theworkability period of hydraulically bound mixtures.EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the determination of themoisture condition value.prEN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test method for the determination ofCalifornia bearing ratio, immediate bearing index and linear swelling.prEN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the determination of thedegree of pulverisation.SIST EN 13286-3:2004



EN 13286-3:2003 (E)4prEN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Test method for the determination of theaccelerated swelling of soil treated by lime and/or hydraulic binder.prEN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture of testspecimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction.prEN 13286-51, U
...