SIST EN 31:2011+A1:2014
(Main)Wash basins - Connecting dimensions
Wash basins - Connecting dimensions
This European Standard specifies the connecting dimensions of wash basins in accordance with EN 14688 regardless of materials used for their manufacture.
Waschbecken - Anschlussmaße
Diese Europäische Norm legt Anschlussmaße für Waschbecken nach EN 14688, unabhängig vom für ihre Herstellung verwendeten Werkstoff, fest.
ANMERKUNG 1 Andere Anschlussmaße sind zulässig, z. B. für spezielle Ausführungen von Waschbecken, wenn der Hersteller eine geeignete Ablaufgarnitur mitliefert oder empfiehlt.
ANMERKUNG 2 Die in den Bildern dargestellte Form der Gegenstände wurde nur für das bessere Verständnis gewählt; sie schreibt nicht die endgültige Form der Gegenstände vor, die der Wahl des Herstellers überlassen bleibt.
Lavabos - Cotes de raccordement
La présente Norme Européenne spécifie les cotes de raccordement des lavabos conforme à EN 14688, quels que soient les matériaux entrants dans leur fabrication.
NOTE 1 D’autres cotes de raccordement sont possibles, dans le cas, par exemple, de conceptions particulières de lavabos, si le fabricant fournit ou recommande les dispositifs de robinetterie appropriés.
NOTE 2 La forme des appareils représentés sur les figures est donnée uniquement à titre d’illustration ; elle ne préjuge en rien de la forme définitive de l’appareil qui est laissée à l’initiative du fabricant.
Umivalniki - Priključne mere
Ta evropski standard določa priključne mere za umivalnike v skladu s standardom EN 14688 ne glede na material, iz katerega so izdelani.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Waschbecken - AnschlussmaßeLavabos - Cotes de raccordementWash basins - Connecting dimensions91.140.70Sanitarne napraveSanitary installationsICS:Ta slovenski standard je istoveten z:EN 31:2011+A1:2014SIST EN 31:2011+A1:2014en,fr,de01-julij-2014SIST EN 31:2011+A1:2014SLOVENSKI
STANDARDSIST EN 31:2011/kFprA1:2014SIST EN 31:20111DGRPHãþD
SIST EN 31:2011+A1:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 31:2011+A1
April 2014 ICS 91.140.70 Supersedes EN 31:2011English Version
Wash basins - Connecting dimensions
Lavabos - Cotes de raccordement
Waschbecken - Anschlussmaße This European Standard was approved by CEN on 29 July 2011 and includes Amendment 1 approved by CEN on 10 March 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 31:2011+A1:2014 ESIST EN 31:2011+A1:2014
EN 31:2011+A1:2014 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Tap holes .4 3.1 General .4 3.2 Connecting dimensions of wash basins with one central tap hole .4 3.3 Connecting dimensions of wash basins with side tap hole(s) .6 3.4 Connecting dimensions of wash basins with three tap holes .7 4 Waste outlet hole(s) .9 4.1 Connecting dimensions of waste outlet hole(s) with integral overflow.9 4.2 Connecting dimensions of waste outlet hole without integral overflow .9 5 Fixing dimensions of wall-hung wash basins . 11 Annex A (informative)
Example of gauge for measuring the connecting dimensions of waste outlet holes . 13
SIST EN 31:2011+A1:2014
EN 31:2011+A1:2014 (E) 3 Foreword This document (EN 31:2011+A1:2014) has been prepared by Technical Committee CEN/TC 163 “Sanitary appliances”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2014, and conflicting national standards shall be withdrawn at the latest by October 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 31:2011". This document includes Amendment 1 approved by CEN on 2014-03-10. The start and finish of text introduced or altered by amendment is indicated in the text by tags !". According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 31:2011+A1:2014
EN 31:2011+A1:2014 (E) 4 1 Scope This European Standard specifies the connecting dimensions of wash basins in accordance with EN 14688 regardless of materials used for their manufacture. NOTE 1 Other connecting dimensions are permitted, e.g. special designs of wash basins, if the manufacturer supplies or recommends the appropriate fitting. NOTE 2 The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14688, Sanitary appliances - Wash basins - Functional requirements and test methods 3 Tap holes 3.1 General The connecting dimensions for tap holes are requirements for wash basins where it is intended to fit a tap. 3.2 Connecting dimensions of wash basins with one central tap hole The connecting dimensions of wash basins with one central tap hole shall comply with Table 1. Table 1 — Connecting dimensions of wash basins with one central tap hole (Figure 1) Designation Symbol Dimensions mm Diameter of the central tap hole (intended to accommodate a mixer tap) d2a 3521+− Horizontal distance between the centre line of the central tap hole and the edge of the bowl g1 ≤ 80 Distance from the centre line of the central tap hole to the back wall g3 ≥ 55 Radius of a cylinder having the same centre line as the central tap hole at a depth 0 mm to 5 mm from the lower plane of the central tap hole r1 ≥ 25 Radius of a cylinder having the same centre line as the central tap hole at a depth of minimum 5 mm from the lower plane of the central tap hole r2 ≥ 30 Radius of a flat plane circular surface on the tap platform having the same centre as the central tap hole and intended to accommodate the tap r3 ≥ 32 SIST EN 31:2011+A1:2014
EN 31:2011+A1:2014 (E) 5 Thickness of the platform
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.