SIST EN 60216-1:2013
(Main)Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results
This part of IEC 60216 specifies the general ageing conditions and procedures to be used for deriving thermal endurance characteristics and gives guidance in using the detailed instructions and guidelines in the other parts of the standard. Although originally developed for use with electrical insulating materials and simple combinations of such materials, the procedures are considered to be of more general applicability and are widely used in the assessment of materials not intended for use as electrical insulation. In the application of this standard, it is assumed that a practically linear relationship exists between the logarithm of the time required to cause the predetermined property change and the reciprocal of the corresponding absolute temperature (Arrhenius relationship). For the valid application of the standard, no transition, in particular no first-order transition should occur in the temperature range under study. Throughout the rest of this standard the term "insulating materials" is always taken to mean "insulating materials and simple combinations of such materials".
/
Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 1: Méthodes de vieillissement et évaluation des résultats d'essai
La CEI 60216-1:2013 spécifie les conditions générales de vieillissement et les méthodes à utiliser pour en extraire les caractéristiques d'endurance thermique, et fixe des orientations pour l'utilisation des instructions détaillées et des directives précisées dans les autres parties de la norme. Même si à l'origine elles ont été développées pour être utilisées sur les matériaux isolants électriques et des combinaisons simples de tels matériaux, ces méthodes sont considérées comme étant applicables plus généralement et sont largement utilisées pour vérifier des matériaux non destinés à être utilisés comme isolants électriques. Dans l'application de cette norme, on suppose qu'une relation pratiquement linéaire existe entre le logarithme du temps nécessaire pour provoquer la modification prédéterminée de la propriété, et l'inverse de la température absolue correspondante (relation d'Arrhenius). Pour que la norme soit valable, il convient qu'il n'y ait pas de transition, en particulier de transition du premier ordre, dans la gamme de températures à l'étude. Cette sixième édition annule et remplace la cinquième édition, parue en 2001. Cette édition constitue une révision éditoriale de laquelle à été retirée la méthode simplifiée qui constitue maintenant la Partie 8 de la CEI 60216: Instructions pour le calcul des caractéristiques d'endurance thermique en utilisant les méthodes simplifiées.
Električni izolacijski materiali - Lastnosti toplotne vzdržljivosti - 1. del: Postopki staranja in vrednotenje rezultatov preskušanja
Ta del standarda IEC 60216 določa splošne pogoje staranja in postopke, ki naj se uporabijo za izpeljavo lastnosti toplotne vzdržljivosti, prav tako pa podaja smernice za uporabo podrobnih navodil in smernic v drugih delih standarda. Čeprav so bili postopki izvorno razviti za uporabo z elektroizolacijskimi materiali in preprostimi kombinacijami takšnih materialov, so bolj splošno uporabni in se obsežno uporabljajo pri vrednotenju materialov, ki niso namenjeni za uporabo kot elektroizolacija. V uporabi tega standarda se predvideva, da obstaja praktično linearno razmerje med logaritmom časa, potrebnega za povzročitev spremembe vnaprej določene lastnosti, in recipročno glede na ustrezno absolutno temperaturo (Arrheniusovo razmerje). Za veljavno uporabo standarda se v proučevanem temperaturnem obsegu ne sme pojaviti prehod, zlasti pa ne prehod prvega reda. V ostalem delu tega standarda izraz »izolacijski materiali« vedno pomeni »izolacijski materiali in enostavne kombinacije takšnih materialov«.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno./Matériaux isolants électriques - Propriétés d'endurance thermique - Partie 1: Méthodes de vieillissement et évaluation des résultats d'essaiElectrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results29.035.01Izolacijski materiali na splošnoInsulating materials in generalICS:Ta slovenski standard je istoveten z:EN 60216-1:2013SIST EN 60216-1:2013en01-september-2013SIST EN 60216-1:2013SLOVENSKI
STANDARDSIST EN 60216-1:20021DGRPHãþD
SIST EN 60216-1:2013
EUROPEAN STANDARD EN 60216-1 NORME EUROPÉENNE
EUROPÄISCHE NORM July 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60216-1:2013 E
ICS 17.220.99; 29.035.01 Supersedes EN 60216-1:2001 (partially)
English version
Electrical insulating materials -
Thermal endurance properties -
Part 1: Ageing procedures and evaluation of test results (IEC 60216-1:2013)
Matériaux isolants électriques -
Propriétés d'endurance thermique -
Partie 1: Méthodes de vieillissement
et évaluation des résultats d'essai (CEI 60216-1:2013)
Elektroisolierstoffe -
Eigenschaften hinsichtlich des thermischen Langzeitverhaltens -
Teil 1: Warmlagerungsverfahren und Auswertung von Prüfergebnissen (IEC 60216-1:2013)
This European Standard was approved by CENELEC on 2013-04-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 60216-1:2013
EN 60216-1:2013 - 2 -
Foreword The text of document 112/235/FDIS, future edition 6 of IEC 60216-1, prepared by IEC/TC 112 "Evaluation and qualification of electrical insulating materials and systems" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60216-1:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-19 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-19
This document supersedes EN 60216-1:2001 (PART).
EN 60216-1:2013 includes the following significant changes with respect to EN 60216-1:2001:
This edition constitutes an editorial revision where the simplified method has been removed and now forms Part 8 of the EN 60216 Series: Instructions for calculating thermal endurance characteristics using simplified procedures.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 60216-1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
ISO 291 NOTE Harmonised as EN ISO 291. ISO 2578:1993 NOTE Harmonised as EN ISO 2578:1998 (not modified). SIST EN 60216-1:2013
- 3 - EN 60216-1:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60212 - Standard conditions for use prior to and during the testing of solid electrical
insulating materials EN 60212 -
IEC 60216-2 - Electrical insulating materials - Thermal endurance properties -
Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria EN 60216-2 -
IEC 60216-3 + corr. December
2006 2009 Electrical insulating materials - Thermal endurance properties -
Part 3: Instructions for calculating thermal endurance characteristics EN 60216-3 2006
IEC 60216-4 Series Electrical insulating materials - Thermal endurance properties EN 60216-4 Series
IEC 60216-4-1 - Electrical insulating materials - Thermal endurance properties -
Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 -
IEC 60216-8 2013 Electrical insulating materials - Thermal endurance properties -
Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures EN 60216-8 2013
IEC 60493-1 2011 Guide for the statistical analysis of ageing test data -
Part 1: Methods based on mean values of normally distributed test results - -
SIST EN 60216-1:2013
SIST EN 60216-1:2013
IEC 60216-1 Edition 6.0 2013-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electrical insulating materials – Thermal endurance properties –
Part 1: Ageing procedures and evaluation of test results
Matériaux isolants électriques – Propriétés d'endurance thermique –
Partie 1: Méthodes de vieillissement et évaluation des résultats d'essai
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE V ICS 17.220.99; 29.035.01 PRICE CODE CODE PRIX ISBN 978-2-83220-680-5
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ®
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé. SIST EN 60216-1:2013
– 2 – 60216-1 © IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms, definitions, symbols and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Symbols and abbreviations . 10 4 Synopsis of procedures – Full procedures . 11 5 Detailed experimental procedures . 11 5.1 Selection of test procedures . 11 5.1.1 General considerations . 11 5.1.2 Selection of test properties for TI . 11 5.1.3 Determination of TI for times other than 20 000 h . 12 5.2 Selection of end-points . 12 5.3 Preparation and number of test specimens . 12 5.3.1 Preparation . 12 5.3.2 Number of specimens . 13 5.4 Establishment of initial property value . 14 5.5 Exposure temperatures and times . 14 5.6 Ageing ovens . 14 5.7 Environmental conditions . 15 5.7.1 General . 15 5.7.2 Atmospheric conditions during ageing . 15 5.7.3 Conditions for property measurement . 15 5.8 Procedure for ageing . 15 5.8.1 General . 15 5.8.2 Procedure using a non-destructive test . 15 5.8.3 Procedure using a proof test . 16 5.8.4 Procedure using a destructive test . 16 6 Evaluation . 16 6.1 Numerical analysis of test data . 16 6.2 Thermal endurance characteristics and formats . 17 6.3 Times to end-point, x- and y-values . 18 6.3.1 General . 18 6.3.2 Non-destructive tests . 18 6.3.3 Proof tests . 19 6.3.4 Destructive tests . 19 6.4 Means and variances . 21 6.4.1 Complete data . 21 6.4.2 Incomplete (censored) data . 22 6.5 General means and variances and regression analysis. 22 6.6 Statistical tests and data requirements . 22 6.6.1 General . 22 6.6.2 Data of all types . 22 6.6.3 Proof tests . 23 6.6.4 Destructive tests . 23 SIST EN 60216-1:2013
60216-1 © IEC:2013 – 3 – 6.7 Thermal endurance graph and thermal endurance characteristics . 24 6.8 Test report . 24 Annex A (informative)
Dispersion and non-linearity . 26 Annex B (informative)
Exposure temperatures and times . 28 Annex C (informative)
Concepts in earlier editions . 31 Bibliography . 33
Figure 1 – Thermal endurance graph . 17 Figure 2 – Property variation – Determination of time to end-point at each temperature (destructive and non-destructive tests) . 19 Figure 3 – Estimation of times to end-point – Property value (ordinate, arbitrary units) versus time (abscissa, log scale, arbitrary units) . 20 Figure 4 – Destructive tests – Estimation of time to end-point . 21 Figure C.1 – Relative temperature index
(Adapted from Figure 3, IEC 60216-1:1990, 4th edition) . 32
Table 1 – Suggested exposure temperatures and times . 25 Table B.1 – Groups . 29
SIST EN 60216-1:2013
– 4 – 60216-1 © IEC:2013 INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTRICAL INSULATING MATERIALS –
THERMAL ENDURANCE PROPERTIES –
Part 1: Ageing procedures and evaluation of test results
FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60216-1 has been prepared by IEC technical committee 112: Evaluation and qualification of electrical insulating materials and systems. This sixth edition cancels and replaces the fifth edition, published in 2001. It constitutes an editorial revision where the simplified method has been removed and now forms Part 8 of the IEC 60216 series: Instructions for calculating thermal endurance characteristics using simplified procedures.
The text of this standard is based on the following documents: FDIS Report on voting 112/235/FDIS 112/243/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. SIST EN 60216-1:2013
60216-1 © IEC:2013 – 5 – This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60216 series, published under the general title Electrical insulating materials – Thermal endurance properties, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to the specific publication. At this date, the publication will be
• reconfirmed, • withdrawn, • replaced by a revised edition, or • amended.
SIST EN 60216-1:2013
– 6 – 60216-1 © IEC:2013 INTRODUCTION The listing of the thermal capabilities of electrical insulating materials, based on service experience, was found to be impractical, owing to the rapid development of polymer and insulation technologies and the long time necessary to acquire appropriate service experience. Accelerated ageing and test procedures were therefore required to obtain the necessary information. The IEC 60216 series has been developed to formalize these procedures and the interpretation of their results. Physico-chemical models postulated for the ageing processes led to the almost universal assumption of the Arrhenius equations to describe the rate of ageing. Out of this arose the concept of the temperature index (TI) as a single-point characteristic based upon accelerated ageing data. This is the numerical value of the temperature in °C at which the time taken for deterioration of a selected property to reach an accepted end-point is that specified (usually 20 000 h). NOTE The term Arrhenius is widely used (and understood) to indicate a linear relationship between the logarithm of a time and the reciprocal of the thermodynamic (absolute or Kelvin) temperature. The correct usage is restricted to such a relationship between a reaction rate constant and the thermodynamic temperature. The common usage is employed throughout this standard. The large statistical scatter of test data which was found, together with the frequent occurrence of substantial deviations from the ideal behavior, demonstrated the need for tests to assess the validity of the basic physico-chemical model. The application of conventional statistical tests, as set out in IEC 60493-1, fulfilled this requirement, resulting in the "confidence limit", (TC) of TI, but the simple, single-point TI was found inadequate to describe the capabilities of materials. This led to the concept of the "Thermal Endurance Profile" (TEP), incorporating the temperature index, its variation with specified ageing time, and a confidence limit. A complicating factor is that the properties of a material subjected to thermal ageing may not all deteriorate at the same rate, and different end-points may be relevant for different applications. Consequently, a material may be assigned more than one temperature index, derived, for example, from the measurement of different properties and the use of different end-point times. It was subsequently found that the statistical confidence index included in the TEP was not widely understood or used. However, the statistical tests were considered essential, particularly after minor modifications to make them relate better to practical circumstances: the concept of the halving interval (HIC) was introduced to indicate the rate of change of ageing time with temperature. TEP was then abandoned, with the TI and HIC being reported in a way which indicated whether or not the statistical tests had been fully satisfied. At the same time, the calculation procedures were made more comprehensive, enabling full statistical testing of data obtained using a diagnostic property of any type, including the particular case of partially incomplete data. Simultaneously with the development of the IEC 60216 series, other standards were being developed in ISO, intended to satisfy a similar requirement for plastics and rubber materials. These are ISO 2578 and ISO 11346 respectively, which use less rigorous statistical procedures and more restricted experimental techniques. A simplified calculation procedure is described in IEC 60216-8. SIST EN 60216-1:2013
60216-1 © IEC:2013 – 7 – ELECTRICAL INSULATING MATERIALS –
THERMAL ENDURANCE PROPERTIES –
Part 1: Ageing procedures and evaluation of test results
1 Scope This part of IEC 60216 specifies the general ageing conditions and procedures to be used for deriving thermal endurance characteristics and gives guidance in using the detailed instructions and guidelines in the other parts of the standard. Although originally developed for use with electrical insulating materials and simple combinations of such materials, the procedures are considered to be of more general applicability and are widely used in the assessment of materials not intended for use as electrical insulation. In the application of this standard, it is assumed that a practically linear relationship exists between the logarithm of the time required to cause the predetermined property change and the reciprocal of the corresponding absolute temperature (Arrhenius relationship). For the valid application of the standard, no transition, in particular no first-order transition should occur in the temperature range under study. Throughout the rest of this standard the term "insulating materials" is always taken to mean "insulating materials and simple combinations of such materials".
2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60212, Standard conditions for use prior to and during the testing of solid electrical insulating materials IEC 60216-2, Electrical insulating materials – Thermal endurance properties – Part 2: Determination of thermal endurance properties of electrical insulating materials – Choice of test criteria
IEC 60216-3:2006, Electrical insulating materials – Thermal endurance properties – Part 3: Instructions for calculating thermal endurance characteristics
IEC 60216-4 (all Parts 4), Electrical insulating materials – Thermal endurance properties – Part 4: Ageing ovens IEC 60216-4-1, Electrical insulating materials – Thermal endurance properties – Part 4-1: Ageing ovens – Single-chamber ovens IEC 60216-8, Electrical insulating materials – Thermal endurance properties – Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures1 –––––––– 1 To be published. SIST EN 60216-1:2013
– 8 – 60216-1 © IEC:2013 IEC 60493-1:2011, Guide for the statistical analysis of ageing test data – Part 1: Methods based on mean values of normally distributed test results 3 Terms, definitions, symbols and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply: 3.1.1
temperature index
TI numerical value of the temperature in degrees Celsius derived from the thermal endurance relationship at a time of 20 000 h (or other specified time)
3.1.2
halving interval
HIC numerical value of the temperature interval in Kelvin which expresses the halving of the time to end-point taken at the temperature equal to TI
[SOURCE: IEC 60050-212:2010, definition 212-12-13, modified – "equal to TI" replaces "corresponding to the temperature index or the relative temperature index"] 3.1.3
thermal endurance graph graph in which the logarithm of the time to reach a specified end-point in a thermal endurance test is plotted against the reciprocal thermodynamic (absolute) test temperature
[SOURCE: IEC 60050-212:2010, definition 212-12-10, modified – "insertion of word "(absolute)"] 3.1.4
thermal endurance graph paper graph paper having a logarithmic time scale as the ordinate, graduated in powers of ten (from 10 h to 100 000 h is often a convenient range) Note 1 to entry: Values of the abscissa are proportional to the reciprocal of the thermodynamic (absolute) temperature. The abscissa is usually graduated in a non-linear (Celsius) temperature scale oriented with temperature increasing from left to right.
3.1.5
ordered data
set of data arranged in sequence so that, in the appropriate direction through the sequence, each member is greater than, or equal to, its predecessor Note 1 to entry: Ascending order in this standard implies that the data is ordered in this way, the first order-statistic being the smallest. 3.1.6
order-statistics each individual value in a set of ordered data is referred to as an order-statistics identified by its numerical position in the sequence 3.1.7
incomplete data ordered data, where the values above and/or below defined points are not known SIST EN 60216-1:2013
60216-1 © IEC:2013 – 9 – 3.1.8
censored data incomplete data, where the number of unknown values is known Note 1 to entry: If the censoring is begun above/below a specified numerical value, the censoring is of type 1. If above/below a specified order-statistic, it is of type 2. This standard is concerned only with type 2. 3.1.9
degrees of freedom number of data values minus the number of parameter values 3.1.10
variance of a data set sum of the squares of the deviations of the data from a reference level defined by one or more parameters, divided by the number of degrees of freedom Note 1 to entry: The reference level may for example, be a mean value (one parameter) or a line (two parameters, slope and intercept). 3.1.11
covariance of data sets for two sets of data with equal numbers of elements where each element in one set corresponds to one in the other, the sum of the products of the deviations of the corres-ponding members from their set means, divided by the number of degrees of freedom 3.1.12
regression analysis process of deducing the best-fit line expressing the relation of corresponding members of two data groups by minimizing the sum of squares of deviations of members of one of the groups from the line Note 1 to entry: The parameters are referred to as the regression coefficients. 3.1.13
correlation coefficient number expressing the completeness of the relation between members of two data sets, equal to the covariance divided by the square root of the product of the variances of the sets Note 1 to entry: The value of its square is between 0 (no correlation) and 1 (complete correlation). 3.1.14
confidence limit
TC statistical parameter, calculated from the test data, which with 95 % confidence constitutes a lower limit for the true value of the temperature index estimated by TI Note 1 to entry: 95 % confidence implies that there is only 5 % probability that the true value of the temperature index is actually smaller than TC. Note 2 to entry: In other connections, confidence values other than 95 % may sometimes be used; for example, in the linearity test for destructive test data. 3.1.15
destructive test diagnostic property test, where the test specimen is irreversibly changed by the property measurement, in a way which precludes a repeated measurement on the same specimen SIST EN 60216-1:2013
– 10 – 60216-1 © IEC:2013 3.1.16
non-destructive test diagnostic property test, where the properties of the test specimen are not permanently changed by the measurement, so that a further measurement on the same specimen may be made after appropriate treatment 3.1.17
proof test diagnostic property test, where each test specimen is, at the end of each ageing cycle, subjected to a spec
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.