SIST EN 12503-3:2002

Sports mats - Part 3: Judo mats, safety requirements

This standard specifies performance and safety requirements for judo mats used in school, training and competition. For the specific requirements of international official competitions, it is necessary to be in conformity with appropriate. The performance and safety values concern shock absorption, stiffness, anti-slip characteristics of the base and top friction characteristics of the surface.

Sportmatten - Teil 3: Judomatten, sicherheitstechnische Anforderungen

Diese Norm legt Anforderungen an die Ausführung und sicherheitstechnische Anforderungen an Judomatten für den Gebrauch in Schulen, beim Training und bei Wettkämpfen fest.
Die Werte bei der Ausführung und Sicherheit betreffen die Dämpfungseigenschaften, die Steifigkeit, die Reibungseigenschaften der Unterseite und die Reibungseigenschaften der Oberseite. Sie beziehen sich auf Prüfverfahren in den besonderen Normen, die in Abschnitt 2 angegeben sind.
Maße und Grenzabweichungen sind in einem informativen Anhang enthalten.
ANMERKUNG   Hinsichtlich der besonderen Anforderungen bei internationalen offiziellen Wettkämpfen siehe die entsprechenden internationalen Regeln.

Tapis de sport - Partie 3: Tapis de judo, exigences de sécurité

La présente norme fixe les performances et les exigences de sécurité des tapis de judo utilisés dans les écoles, a l'entraînement et en compétition.
Les valeurs relatives aux performances et a la sécurité concernent l'absorption des chocs, la rigidité, les caractéristiques antidérapantes de la base, ainsi que les caractéristiques au frottement de la surface. Elles se rapportent aux méthodes d'essai définies dans les normes spécifiques citées dans l'article 2.
Les dimensions et les tolérances sont indiquées dans une annexe informative.
NOTE   En ce qui concerne les exigences spécifiques des compétitions officielles internationales, voir les reglements internationaux appropriés.

Športne blazine - 3. del: Blazine za judo, varnostne zahteve

General Information

• Status: Published
• Publication Date: 31-Aug-2002
• ICS: 97.220.30 - Indoor sports equipment
• Technical Committee: SPO - Sports
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Sep-2002
• Due Date: 01-Sep-2002
• Completion Date: 01-Sep-2002
• Ref Project: EN 12503-3:2001 - Sports mats - Part 3: Judo mats, safety requirements

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Športne blazine - 3. del: Blazine za judo, varnostne zahteveSportmatten - Teil 3: Judomatten, sicherheitstechnische AnforderungenTapis de sport - Partie 3: Tapis de judo, exigences de sécuritéSports mats - Part 3: Judo mats, safety requirements97.220.30Oprema za dvoranske športeIndoor sports equipmentICS:Ta slovenski standard je istoveten z:EN 12503-3:2001SIST EN 12503-3:2002en01-september-2002SIST EN 12503-3:2002SLOVENSKI
STANDARD



SIST EN 12503-3:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12503-3April 2001ICS 97.220.30English versionSports mats - Part 3: Judo mats, safety requirementsTapis de sport - Partie 3: Tapis de judo, exigences desécuritéSportmatten - Teil 3: Judomatten, sicherheitstechnischeAnforderungenThis European Standard was approved by CEN on 21 January 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12503-3:2001 ESIST EN 12503-3:2002



Page 2EN 12503-3:2001ContentsPageForeword .21
Scope .32
Normative references .33
Terms and definitions .34
Classification .45
Performance and safety requirements .46
Marking .4Annex A (informative) Dimensions and tolerances .5Annex B
(informative) Flame retardancy .6ForewordThis European Standard has been prepared by Technical Committee CEN/TC 136 "Sports, playground and otherrecreational equipment", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2001, and conflicting national standards shall be withdrawn at the latestby October 2001.This standard EN 12503 "Sports mats" consists of:Part 1:Gymnastic mats, safety requirementsPart 2:Pole vault and high jump mats, safety requirementsPart 3:Judo mats, safety requirementsPart 4:Determination of shock absorptionPart 5:Determination of the base frictionPart 6:Determination of the top frictionPart 7:Determination of static stiffnessThe annexes A and B are informative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 12503-3:2002



Page 3EN 12503-3:20011 ScopeThis standard specifies performance and safety requirements for judo mats used in schools, training andcompetition.The performance and safety values concern shock absorption, stiffness, anti-slip characteristics of the base and topfriction characteristics of the surface. They refer to test methods defined in specific standards indicated in clause 2.Dimensions and tolerances are given in an
...