SIST EN 352-5:2003/A1:2006

Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs

Change the requirement for linearity to check the performance up to 110 dB(A) and to report the limit of linearity if found.

Gehörschützer - Sicherheitstechnische Anforderungen und Prüfungen - Teil 5: Kapselgehörschützer mit aktiver Geräuschkompensation

Protecteurs individuels contre le bruit - Exigences de sécurité et essais - Partie 5 : Serre-tete a atténuation active du bruit

Varovala sluha - Varnostne zahteve in preskušanje - 5. del: Naušniki za zmanjšanje delovnega hrupa

General Information

• Status: Published
• Publication Date: 30-Apr-2006
• ICS: 13.340.20 - Head protective equipment
• Technical Committee: OVP - Personal protecting equipment
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2006
• Due Date: 01-May-2006
• Completion Date: 01-May-2006
• Directive: 2016/425 - Regulation (EU) 2016/425 of the European Parliament and of the Council of 9 March 2016 on personal protective equipment and repealing Council Directive 89/686/EEC
• Directive: 89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
• Ref Project: EN 352-5:2002/A1:2005 - Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs

Relations

• Replaced By: SIST EN 352-5:2021 - Hearing protectors - Safety requirements - Part 5: Active noise reduction earmuffs
• Effective Date: 01-Apr-2021
• Amends: SIST EN 352-5:2003 - Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
• Effective Date: 22-Dec-2008
• Amends: SIST EN 352-5:2003 - Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 352-5:2003/A1:2006
01-maj-2006
Varovala sluha - Varnostne zahteve in preskušanje - 5. del: Naušniki za zmanjšanje
delovnega hrupa
Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-
muffs
Gehörschützer - Sicherheitstechnische Anforderungen und Prüfungen - Teil 5:
Kapselgehörschützer mit aktiver Geräuschkompensation
Protecteurs individuels contre le bruit - Exigences de sécurité et essais - Partie 5 : Serre-
tete a atténuation active du bruit
Ta slovenski standard je istoveten z: EN 352-5:2002/A1:2005
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
SIST EN 352-5:2003/A1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 352-5:2003/A1:2006

---------------------- Page: 2 ----------------------

SIST EN 352-5:2003/A1:2006
EUROPEAN STANDARD
EN 352-5:2002/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2005
ICS 13.340.20

English Version
Hearing protectors - Safety requirements and testing - Part 5:
Active noise reduction ear-muffs
Protecteurs individuels contre le bruit - Exigences de Gehörschützer - Sicherheitstechnische Anforderungen und
sécurité et essais - Partie 5 : Serre-tête à atténuation active Prüfungen - Teil 5: Kapselgehörschützer mit aktiver
du bruit Geräuschkompensation
This amendment A1 modifies the European Standard EN 352-5:2002; it was approved by CEN on 3 November 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 352-5:2002/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 352-5:2003/A1:2006
EN 352-5:2002/A1:2005 (E)
Foreword
This European Standard (EN 352-5:2002/A1:2005) has been prepared by Technical Committee CEN/TC 159
“Hearing protectors”, the secretariat of which is held by SIS.
This Amendment to the European Standard EN 352-2:2002 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by June 2006, and conflicting national
standards shall be withdrawn at the latest by June 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

2

---------------------- Page: 4 ----------------------

SIST EN 352-5:2003/A1:2006
EN 352-5:2002/A1:2005 (E)
Page 6, subclause 4.3.3
Replace the existing text of 4.3.3 with the following:
4.3.3 Maximum Sound Pressure Level for linear operation
The highest level of the external test noise for which the sound pressure level at the subject's ear remains
linearly related to the external sound pressure level, for all subjects and samples tested, up to a maximum
external sound pressure level of 110 dB, shall be determined in accordance wi
...