SIST EN 17558:2024
(Main)Ergonomics - Ergonomics of PPE ensembles
Ergonomics - Ergonomics of PPE ensembles
This document can be used to compare the performance of different ensembles as part of any PPE selection process.
This document does not replace the product standards for the certification of individual items of PPE. It specifies the testing of individual items of PPE as an ensemble, so that the interaction between the individual items of PPE can be evaluated and any adverse interactions between the individual items of PPE can be identified.
It specifies requirements for testing by either assessing the performance of a PPE ensemble against a benchmark condition (i.e. benchmark testing) or assessing the performance of two or more PPE ensembles against each other (i.e. comparative testing).
The standard incorporates laboratory as well as field based testing. It can also be used to assess the performance regarding the ergonomics of an ensemble that incorporates an item of PPE that has never before been incorporated into an ensemble.
Ergonomie - Ergonomie von PSA-Ensembles
Dieses Dokument kann verwendet werden, um die Leistung verschiedener Ensembles als Teil eines PSA-Auswahlverfahrens zu vergleichen.
Dieses Dokument ersetzt nicht die Produktnormen für die Zertifizierung einzelner PSA-Produkte. Sie legt die Prüfung einzelner PSA als Ensemble fest, damit die Wechselwirkung zwischen den einzelnen PSA bewertet und nachteilige Wechselwirkungen zwischen den einzelnen PSA erkannt werden können.
Sie legt die Anforderungen an die Prüfung entweder durch die Bewertung der Leistung eines PSA-Ensembles im Vergleich zu einer Referenzbedingung (d. h. Benchmark-Prüfung) oder durch die Bewertung der Leistung von zwei oder mehr PSA-Ensembles im Vergleich zueinander (d. h. Vergleichsprüfung) fest.
Die Norm umfasst sowohl labor- als auch feldbasierte Prüfungen. Sie kann außerdem zur Bewertung der Leistung in Bezug auf die Ergonomie des Ensembles verwendet werden, die ein PPE-Produkt umfasst, das zuvor noch nie in ein Ensemble integriert wurde.
Ergonomie - Ergonomie des ensembles d’EPI
Le présent document peut être utilisé pour comparer les performances de différents ensembles dans le cadre de tout processus de sélection d’EPI.
Le présent document ne remplace pas les normes de produits pour la certification des éléments d’EPI individuels. Il spécifie l’essai des éléments d’EPI individuels en tant qu’ensemble, afin de pouvoir évaluer l’interaction entre les éléments d’EPI individuels et d’identifier toute interaction négative entre les différents éléments d’EPI.
Il spécifie les exigences en matière d’essais, soit en évaluant les performances d’un ensemble d’EPI par rapport à une condition de référence (c’est-à-dire un essai de référence), soit en évaluant les performances de deux ensembles d’EPI ou plus les uns par rapport aux autres (c’est-à-dire un essai comparatif).
La norme prévoit des essais en laboratoire et sur le terrain. Elle peut également être utilisée pour évaluer les performances en matière d’ergonomie d’un ensemble qui comprend un élément d’EPI n’ayant jamais été intégré auparavant dans un ensemble.
Ergonomija - Ergonomija kompletov osebne varovalne opreme (OVO)
Ta dokument je mogoče uporabiti za primerjavo zmogljivosti različnih kompletov v okviru katerega koli postopka izbire osebne varovalne opreme (OVO).
Ta dokument ne nadomešča standardov za izdelke v zvezi s certificiranjem posameznih elementov osebne varovalne opreme. Določa preskušanje posameznih elementov osebne varovalne opreme kot celote, tako da je mogoče ovrednotiti interakcijo med posameznimi elementi osebne varovalne opreme in ugotoviti morebitne škodljive interakcije med njimi.
Določa zahteve za preskušanje bodisi z ocenjevanjem učinkovitosti kompleta osebne varovalne opreme glede na referenčni pogoj (tj. referenčno preskušanje) ali z ocenjevanjem učinkovitosti dveh ali več kompletov osebne varovalne opreme med seboj (tj. primerjalno preskušanje).
Standard zajema tako laboratorijsko kot terensko preskušanje. Uporabiti ga je mogoče tudi za ocenjevanje učinkovitosti v zvezi z ergonomijo kompleta, ki vključuje element osebne varovalne opreme, ki še nikoli doslej ni bil vključen v komplet.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17558:2024
01-januar-2024
Ergonomija - Ergonomija kompletov osebne varovalne opreme (OVO)
Ergonomics - Ergonomics of PPE ensembles
Ergonomie - Ergonomie von PSA-Ensembles
Ergonomie - Ergonomie des ensembles d’EPI
Ta slovenski standard je istoveten z: EN 17558:2023
ICS:
13.180 Ergonomija Ergonomics
13.340.01 Varovalna oprema na Protective equipment in
splošno general
SIST EN 17558:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17558:2024
---------------------- Page: 2 ----------------------
SIST EN 17558:2024
EN 17558
EUROPEAN STANDARD
NORME EUROPÉENNE
June 2023
EUROPÄISCHE NORM
ICS 13.180; 13.340.01
English Version
Ergonomics - Ergonomics of PPE ensembles
Ergonomie - Ergonomie des ensembles d'EPI Ergonomie - Ergonomie von PSA-Ensembles
This European Standard was approved by CEN on 21 May 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17558:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17558:2024
EN 17558:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Ergonomics testing . 6
5 Test ensemble . 7
5.1 General . 7
5.2 Comparative testing . 7
5.3 Benchmark testing . 9
6 Test persons . 11
6.1 Selection of test persons . 11
6.2 Test person withdrawal . 11
7 Statistical testing . 11
8 Functional performance tests and requirements . 12
8.1 General .
...
SLOVENSKI STANDARD
oSIST prEN 17558:2020
01-december-2020
Ergonomija - Ergonomija kompletov osebne varovalne opreme (OVO)
Ergonomics - Ergonomics of PPE ensembles
Ergonomie - Ergonomie von PSA-Ensembles
Ergonomie - Ergonomie des ensembles d’EPI
Ta slovenski standard je istoveten z: prEN 17558
ICS:
13.180 Ergonomija Ergonomics
13.340.01 Varovalna oprema na Protective equipment in
splošno general
oSIST prEN 17558:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17558:2020
---------------------- Page: 2 ----------------------
oSIST prEN 17558:2020
DRAFT
EUROPEAN STANDARD
prEN 17558
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2020
ICS 13.180; 13.340.01
English Version
Ergonomics - Ergonomics of PPE ensembles
Ergonomie - Ergonomie des ensembles d'EPI Ergonomie - Ergonomie von PSA-Ensembles
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 122.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17558:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17558:2020
prEN 17558:2020 (E)
Contents Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Ergonomics testing . 8
5 Test ensemble . 9
5.1 General . 9
5.2 Comparative testing . 9
5.3 Benchmark testing . 11
6 Test persons . 13
6.1 Selection of test persons . 13
6.2 Test person withdrawal .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.