Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resistant ventilation ducts and fire dampers and or power, control and communication cables

This document specifies the procedure for classification of the resistance to fire performance of construction products and building elements used as components of building service installations, using data from fire resistance tests which are within the direct field of application of the relevant test method. Classification on the basis of extended application of test results is also included in the scope of this document.
Products/elements for use in ventilation systems include (excluding smoke and heat exhaust ventilation):
-   fire resisting ducts;
-   fire dampers.
Products /elements for use in/as cables systems:
-   intrinsic fire resistant cables/unprotected cables;
-   fire protective systems for cable systems;
-   supporting /suspension devices;
-   associated components (connectors, glands, junctions, etc.)
Relevant test methods which have been prepared for these products/elements are listed in Clause 2.

Klassifizierung von Bauprodukten und Bauteilen zu ihrem Brandverhalten - Teil 3: Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen an Bauprodukten und Bauteilen von haustechnischen Anlagen: feuerwiderstandsfähige Lüftungsleitungen und Brandschutzklappen und/oder Starkstromkabel und leitungen, Steuer- und Kommunikationskabel

Dieses Dokument legt das Verfahren zur Klassifizierung der Feuerwiderstandsfähigkeit von Bauprodukten und Bauteilen fest, die als Teil von haustechnischen Anlagen in Gebäuden benutzt werden. Dabei werden die Ergebnisse von Feuerwiderstandsprüfungen benutzt, die innerhalb des direkten Anwendungsbereichs des entsprechenden Prüfverfahrens liegen. Die Klassifizierung auf Basis des erweiterten Anwendungsbereiches von Versuchsergebnissen ist ebenfalls in diesem Dokument behandelt.
Bauprodukte/Bauteile zur Verwendung in Lüftungsanlagen (mit Ausnahme von Bauprodukten zur Rauch- und Wärmefreihaltung) beinhalten:
-   feuerwiderstandsfähige Leitungen;
-   Brandschutzklappen.
Produkte/Elemente zur Verwendung in/als Kabelsysteme(n):
-   Funktionserhaltskabel/ungeschützte Kabel;
-   Brandschutzsysteme für Kabelsysteme;
-   Stütz /Haltevorrichtungen;
-   zugehörige Komponenten (Anschlussstellen, Flansche, Verbindungsteile usw.).
Relevante Prüfverfahren, die für diese Bauprodukte/ teile entwickelt wurden, sind in Abschnitt 2 aufgeführt.

Classement au feu des produits et éléments de construction - Partie 3 : Classement utilisant des données d’essais de résistance au feu de produits et éléments utilisés dans des installations de service : conduits de ventilation et clapets résistants au feu, et/ou câbles de puissance, de commande et de communication

Le présent document spécifie la méthode de classement de performance de la résistance au feu des produits et des éléments de construction utilisés comme composants des installations de service, à partir des données des essais de résistance au feu qui font partie du domaine d’application directe de la méthode d’essai correspondante. Le classement sur la base de l’application étendue des résultats d’essai est également inclus dans le domaine d’application du présent document.
Les produits/éléments pour utilisation dans les systèmes de ventilation comprennent (à l’exclusion des ventilateurs extracteurs de fumées et de chaleur) :
-   les conduits résistants au feu ;
-   les clapets résistants au feu.
Les produits/éléments pour utilisation dans des systèmes de câbles ou en tant que systèmes de câbles incluent :
-   les câbles non protégés/câbles à résistance au feu intrinsèque ;
-   les systèmes de protection incendie pour les systèmes de câbles ;
-   les dispositifs de suspension/support ;
-   les composants associés (connecteurs, presse-étoupe, jonctions, etc.)
Les méthodes d’essai pertinentes qui ont été préparées pour ces produits/éléments sont répertoriées à l’Article 2.

Požarna klasifikacija gradbenih proizvodov in elementov stavb - 3. del: Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti proizvodov in elementov servisnih inštalacij v stavbah: požarno odporni kanali in požarne lopute in/ali napajalni, krmilni in komunikacijski kabli

General Information

Status
Not Published
Public Enquiry End Date
02-Aug-2021
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
05-Aug-2024
Due Date
10-Aug-2024
Completion Date
05-Aug-2024

Relations

Buy Standard

Draft
prEN 13501-3:2021
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-2021
Požarna klasifikacija gradbenih proizvodov in elementov stavb - 3. del:
Klasifikacija na podlagi podatkov iz preskusov požarne odpornosti proizvodov in
elementov servisnih inštalacij v stavbah: požarno odporni kanali in požarne lopute
in/ali napajalni, krmilni in komunikacijski kabli
Fire classification of construction products and building elements - Part 3: Classification
using data from fire resistance tests on products and elements used in building service
installations: fire resistant ventilation ducts and fire dampers and or power, control and
communication cables
Klassifizierung von Bauprodukten und Bauteilen zu ihrem Brandverhalten - Teil 3:
Klassifizierung mit den Ergebnissen aus den Feuerwiderstandsprüfungen an
Bauprodukten und Bauteilen von haustechnischen Anlagen: feuerwiderstandsfähige
Lüftungsleitungen und Brandschutzklappen und/oder Starkstromkabel und leitungen,
Steuer- und Kommunikationskabel
Classement au feu des produits et éléments de construction - Partie 3 : Classement
utilisant des données d’essais de résistance au feu de produits et éléments utilisés dans
des installations de service : conduits de ventilation et clapets résistants au feu, et/ou
câbles de puissance, de commande et de communication
Ta slovenski standard je istoveten z: prEN 13501-3
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.40 Dimniki, jaški, kanali Chimneys, shafts, ducts
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 13.220.50 Will supersede EN 13501-3:2005+A1:2009
English Version
Fire classification of construction products and building
elements - Part 3: Classification using data from fire
resistance tests on products and elements used in building
service installations: fire resistant ventilation ducts and
fire dampers and or power, control and communication
cables
Classement au feu des produits et éléments de Klassifizierung von Bauprodukten und Bauteilen zu
construction - Partie 3 : Classement utilisant des ihrem Brandverhalten - Teil 3: Klassifizierung mit den
données d'essais de résistance au feu de produits et Ergebnissen aus den Feuerwiderstandsprüfungen an
éléments utilisés dans des installations de service : Bauprodukten und Bauteilen von haustechnischen
conduits de ventilation et clapets résistants au feu, Anlagen: feuerwiderstandsfähige Lüftungsleitungen
et/ou câbles de puissance, de commande et de und Brandschutzklappen und/oder Starkstromkabel
communication und leitungen, Steuer- und Kommunikationskabel
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 127.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13501-3:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Fire scenarios . 8
4.1 General. 8
4.2 The standard temperature/time curve (post flashover fire) . 9
4.3 Constant temperature attack at 842 °C . 9
5 Resistance to fire performance characteristics . 9
5.1 Performance characteristics. 9
5.1.1 Introduction . 9
5.1.2 E – Integrity . 9
5.1.3 I – Insulation . 10
5.1.4 S – Smoke leakage . 10
5.1.5 P – Continuity of power and/or signal supply . 10
5.1.6 PH – Continuity of power and/or signal supply . 10
6 Declaration of fire resistance performance . 10
6.1 Classification periods . 10
6.2 Designatory letters . 10
6.3 Declaration of performance . 11
6.4 Combinations of classes . 12
6.5 Presentation of classification . 12
6.6 Declaration of fire resistance classes in product specifications . 12
7 Classification procedure for fire resistance . 13
7.1 General. 13
7.1.1 Procedure . 13
7.1.2 General rules for deducing the number of fire resistance tests. 13
7.1.3 Field of application . 14
7.2 Classification. 14
7.2.1 General. 14
7.2.2 Ventilation ducts . 14
7.2.3 Fire dampers . 16
7.2.4 Fire protective systems for cable systems and associated components . 18
7.2.5 Unprotected electrical cable . 19
7.2.6 Unprotected small electrical cables . 20
7.2.7 Cable management systems (CMS) providing support for cables with intrinsic fire
resistance . 21
Annex A (normative) Classification report . 22
A.1 General. 22
A.2 Content and format . 22
Bibliography . 27

European foreword
This document (prEN 13501-3:2021) has been prepared by Technical Committee CEN/TC 127 “Fire
safety in buildings”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13501-3:2005+A1:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
EN 13501 consists of the following parts:
— Part 1: Classification using data from reaction to fire tests;
— Part 2: Classification using data from fire resistance tests, excluding ventilation services;
— Part 3: Classification using data from fire resistance tests on products and elements used in building
service installations: fire resistant ventilation ducts and fire dampers and power, control and
communication cables;
— Part 4: Classification using data from fire resistance tests on components of smoke control systems;
— Part 5: Classification using data from external fire exposure to roofs tests;
— Part 6: Classification using data from, reaction to fire tests on power, control and communication cables.
Introduction
The aim of this document is to define a harmonized procedure for the classification for resistance to fire
of construction products and elements. This classification is based on the test procedures listed
in Clause 2 and the relevant field of application procedures.
This document is prepared in support of the second essential requirement in the EC Construction
Products Regulation (305/2011), which is detailed in the Interpretative Document number 2
(ID2): Safety in case of fire (OJ C62 Vol 37). It reflects the Commission Decision (EU) 2000/367/EC
of 03/05/2000 amended by 2003/629/EC of 27/08/2003 and 2011/232/EC of 11/04/as regards the
classification of the resistance to fire performance of construction products, construction works and parts
thereof. DD MM 20XX specify performance and classes regarding fire resistance. These classes are
identified by designation letters, each of which refers to an important characteristic of fire resistance
behaviour.
This document provides for a common understanding for these requirements. It interprets the functional
requirements for the different groups of building products and elements and explains the method for
deriving their classification on the basis of test results and/or extended application results for individual
products or elements.
NOTE Test reports constitute the basis for extended application reports as explained in EN 15725.
CEN, CENELEC and EOTA committees preparing technical specifications which contain performance
requirements against fire resistance tests should make reference to the fire resistance classification given
in this document and not refer directly to any specific fire test method.
1 Scope
This document specifies the procedure for classification of the resistance to fire performance of
construction products and building elements used as components of building service installations, using
data from fire resistance tests which are within the direct field of application of the relevant test method.
Classification on the basis of extended application of test results is also included in the scope of this
document.
Products/elements for use in ventilation systems include (excluding smoke and heat exhaust
ventilation):
— fire resisting ducts;
— fire dampers.
Products /elements for use in/as cables systems:
— intri
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.