SIST EN ISO 2419:2012
(Main)Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012)
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012)
ISO 2419:2012 specifies the preparation of leather for physical and mechanical testing together with standard atmospheres for conditioning and testing. It is applicable to all types of dry leather.
Leder - Physikalische und mechanische Prüfungen - Probenvorbereitung und Konditionierung (ISO 2419:2012)
Diese Internationale Norm legt die Vorbereitung von Leder für physikalische und mechanische Prüfungen zusammen mit den Normalklimaten zum Konditionieren und Prüfen fest. Sie ist anwendbar auf alle Arten trockenen Leders.
Cuir - Essais physiques et mécaniques - Préparation et conditionnement des échantillons (ISO 2419:2012)
L'ISO 2419:2012 spécifie la préparation du cuir destiné aux essais physiques et mécaniques ainsi que les atmosphères normales pour le conditionnement et les essais. Elle est applicable à tous les types de cuir sec.
Usnje - Fizikalni in mehanski preskusi - Priprava in kondicioniranje vzorca (ISO 2419:2012)
Ta mednarodni standard določa pripravo usnja za fizikalne in mehanske preskuse ter standardne atmosfere za kondicioniranje in preskušanje. Uporablja se za vse vrste suhega usnja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2012
1DGRPHãþD
SIST EN ISO 2419:2006
Usnje - Fizikalni in mehanski preskusi - Priprava in kondicioniranje vzorca (ISO
2419:2012)
Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO
2419:2012)
Leder - Physikalische und mechanische Prüfungen - Probenvorbereitung und
Konditionierung (ISO 2419:2012)
Cuir - Essais physiques et mécaniques - Préparation et conditionnement des
échantillons (ISO 2419:2012)
Ta slovenski standard je istoveten z: EN ISO 2419:2012
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 2419
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2012
ICS 59.140.30 Supersedes EN ISO 2419:2006
English Version
Leather - Physical and mechanical tests - Sample preparation
and conditioning (ISO 2419:2012)
Cuir - Essais physiques et mécaniques - Préparation et Leder - Physikalische und mechanische Prüfungen -
conditionnement des échantillons (ISO 2419:2012) Probenvorbereitung und Konditionierung (ISO 2419:2012)
This European Standard was approved by CEN on 31 January 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2419:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 2419:2012) has been prepared by Technical Committee CEN/TC 289 “Leather”, the
secretariat of which is held by UNI, in collaboration with Technical Committee IULTCS “International Union of
Leather Technologists and Chemists Societies”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at
the latest by August 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2419:2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland, Turkey and the United Kingdom.
INTERNATIONAL ISO
STANDARD 2419
IULTCS/
IUP 1 and
IUP 3
Fourth edition
2012-02-01
Leather — Physical and mechanical
tests — Sample preparation and
conditioning
Cuir — Essais physiques et mécaniques — Préparation et
conditionnement des échantillons
Reference number
ISO 2419:2012(E)
IULTCS/IUP 1 and IUP 3:2012(E)
©
ISO 2012
ISO 2419:2012(E)
IULTCS/IUP 1 and IUP 3:2012(E)
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
ISO 2419:2012(E)
IULTCS/IUP 1 and IUP 3:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
Internation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.