Leather - Chemical tests - Guidelines for testing critical chemicals in leather (ISO 20137:2023)

ISO 20137:2017 gives guidelines to apply the available chemical test methods for leather. This information can be used by those involved in setting specifications for leather, especially for those parameters relating to restricted chemical substances.
Lists of restricted chemicals contain many substances that are not relevant to the leather industry. Those chemical substances that are not mentioned in this document do not need to be determined, thus avoiding unnecessary analytical costs.

Leder - Chemische Prüfverfahren - Richtlinien für die Prüfung kritischer Chemikalien in Leder (ISO 20137:2023)

Dieses Dokument enthält Listen von Chemikalien, die bereits in Leder festgestellt wurden, und Richtlinien zur Anwendung der verfügbaren chemischen Prüfverfahren für Leder. Diese Information kann von allen verwendet werden, die am Erstellen von Spezifikationen für Leder und besonders für die Parameter von chemischen Stoffen, die Beschränkungen unterliegen, beteiligt sind.
Allgemeine Listen von Beschränkungen unterliegenden Chemikalien, die am Markt verwendet werden, enthalten viele Stoffe, die für die Lederindustrie keine Bedeutung haben. Die in diesem Dokument nicht genannten chemischen Stoffe brauchen nicht bestimmt zu werden, wodurch sich unnötige Analysekosten vermeiden lassen.
ANMERKUNG   Aufgrund der sich ständig ändernden rechtlichen Bestimmungen und toxikologischen Bewertung (für) chemische(r) Stoffe kann dieses Dokument nicht alle potentiell kritischen Stoffe erfassen.

Cuir - Essais chimiques - Lignes directrices pour les essais de produits chimiques critiques sur le cuir (ISO 20137:2023)

ISO 20137:2017 fournit des lignes directrices pour l'application des méthodes d'essais chimiques disponibles pour le cuir. Ces informations peuvent être utilisées par les personnes chargées d'établir des spécifications pour le cuir, en particulier pour les paramètres liés aux substances chimiques faisant l'objet de restrictions.
De nombreuses substances figurant dans les listes de produits chimiques faisant l'objet de restrictions ne sont pas pertinentes pour l'industrie du cuir. Les substances chimiques qui ne sont pas mentionnées dans le présent document n'ont pas besoin d'être déterminées, ce qui évite des coûts analytiques inutiles.

Usnje - Kemijski preskusi - Smernice za preskušanje kritičnih kemikalij v usnju (ISO 20137:2023)

Standard ISO 20137:2017 podaja smernice za uporabo razpoložljivih kemijskih preskusov za usnje. Te informacije lahko uporabljajo vpleteni v določanje specifikacij za usnje, še posebej tistih parametrov, ki se nanašajo na omejene kemijske snovi.
Seznam omejenih kemikalij vsebuje številne snovi, ki niso relevantne za usnjarsko industrijo. Teh kemijskih snovi, ki niso omenjene v tem dokumentu, ni treba določiti, tako da se prepreči nepotrebne stroške analize.

General Information

Status
Published
Public Enquiry End Date
15-Feb-2023
Publication Date
15-Jan-2024
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-Jan-2024
Due Date
09-Mar-2024
Completion Date
16-Jan-2024

Relations

Buy Standard

Standard
EN ISO 20137:2024
English language
23 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20137:2024
01-februar-2024
Usnje - Kemijski preskusi - Smernice za preskušanje kritičnih kemikalij v usnju
(ISO 20137:2023)
Leather - Chemical tests - Guidelines for testing critical chemicals in leather (ISO
20137:2023)
Leder - Chemische Prüfverfahren - Richtlinien für die Prüfung kritischer Chemikalien in
Leder (ISO 20137:2023)
Cuir - Essais chimiques - Lignes directrices pour les essais de produits chimiques
critiques sur le cuir (ISO 20137:2023)
Ta slovenski standard je istoveten z: EN ISO 20137:2023
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 20137:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 20137:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 20137:2024


EN ISO 20137
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2023
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 20137:2017
English Version

Leather - Chemical tests - Guidelines for testing critical
chemicals in leather (ISO 20137:2023)
Cuir - Essais chimiques - Lignes directrices pour les Leder - Chemische Prüfverfahren - Richtlinien für die
essais de produits chimiques critiques sur le cuir (ISO Prüfung kritischer Chemikalien in Leder (ISO
20137:2023) 20137:2023)
This European Standard was approved by CEN on 19 November 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20137:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 20137:2024
EN ISO 20137:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 20137:2024
EN ISO 20137:2023 (E)
European foreword
This document (EN ISO 20137:2023) has been prepared by Technical Committee ISO/IULTCS
"International Union of Leather Technologists and Chemists Societies " in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2024, and conflicting national standards shall be
withdrawn at the latest by May 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20137:2017.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20137:2023 has been approved by CEN as EN ISO 20137:2023 without any modification.

3

---------------------- Page: 5 ----------------------
SIST EN ISO 20137:2024

---------------------- Page: 6 ----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.