SIST EN ISO 2419:2024
(Main)Leather - Physical and mechanical tests - Specimen and test piece conditioning (ISO 2419:2024)
Leather - Physical and mechanical tests - Specimen and test piece conditioning (ISO 2419:2024)
ISO 2419:2012 specifies the preparation of leather for physical and mechanical testing together with standard atmospheres for conditioning and testing. It is applicable to all types of dry leather.
Leder - Physikalische und mechanische Prüfungen - Konditionierung von Proben und Prüfkörpern (ISO 2419:2024)
Dieses Dokument legt die Konditionierung von Leder für physikalische und mechanische Prüfungen in Normalklimaten fest. Es ist auf alle Arten trockenen Leders anwendbar.
Cuir - Essais physiques et mécaniques - Conditionnement de l'échantillon et de l'éprouvette (ISO 2419:2024)
L'ISO 2419:2012 spécifie la préparation du cuir destiné aux essais physiques et mécaniques ainsi que les atmosphères normales pour le conditionnement et les essais. Elle est applicable à tous les types de cuir sec.
Usnje - Fizikalni in mehanski preskusi - Priprava vzorca in preskušanca (ISO 2419:2024)
Standard ISO 2419:2012 določa pripravo usnja za fizikalne in mehanske preskuse ter standardne atmosfere za pripravo in preskušanje. Uporablja se za vse vrste suhega usnja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2024
Usnje - Fizikalni in mehanski preskusi - Priprava vzorca in preskušanca (ISO
2419:2024)
Leather - Physical and mechanical tests - Specimen and test piece conditioning (ISO
2419:2024)
Leder - Physikalische und mechanische Prüfungen - Konditionierung von Proben und
Prüfkörpern (ISO 2419:2024)
Cuir - Essais physiques et mécaniques - Conditionnement de l'échantillon et de
l'éprouvette (ISO 2419:2024)
Ta slovenski standard je istoveten z: EN ISO 2419:2024
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 2419
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2024
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 2419:2012
English Version
Leather - Physical and mechanical tests - Specimen and
test piece conditioning (ISO 2419:2024)
Cuir - Essais physiques et mécaniques - Leder - Physikalische und mechanische Prüfungen -
Conditionnement des spécimens et des éprouvettes Konditionierung von Proben und Prüfkörpern (ISO
(ISO 2419:2024) 2419:2024)
This European Standard was approved by CEN on 17 August 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2419:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 2419:2024) has been prepared by Technical Committee IULTCS "International
Union of Leather Technologists and Chemists Societies" in collaboration with Technical Committee
CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2025, and conflicting national standards
shall be withdrawn at the latest by February 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2419:2012.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 2419:2024 has been approved by CEN as EN ISO 2419:2024 without any modification.
International
Standard
ISO
IULTCS
IUP 3
Fifth edition
Leather — Physical and mechanical
2024-08
tests — Specimen and test piece
conditioning
Cuir — Essais physiques et mécaniques — Conditionnement des
spécimens et des éprouvettes
Reference numbers
ISO 2419:2024(en)
IULTCS/IUP 3:2024(en) © ISO 2024
ISO 2419:2024(en)
IULTCS/IUP 3:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 2419:2024(en)
IULTCS/IUP 3:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Standard atmospheres . 2
5.1 Reference standard atmosphere .2
5.2 Alternative standard atmospheres .2
5.2.1 General .2
5.2.2 Specific standard atmosphere . .2
5.2.3 Tropical standard atmosphere .2
5.3 Tolerance zone for standard atmospheres .2
6 Conditioning . 2
7 Testing. 2
8 Test report . 2
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.