SIST EN 301 649 V2.3.1:2015
Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)
Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)
The present document defines the standard for packet radio services for Digital Enhanced Cordless
Telecommunications (DECT) systems conforming to ETSI EN 300 175-1 [1] to ETSI EN 300 175-8 [8]. It is the basis
of profiles, which define more specific applications (Application Specific Access Profiles ASAPs), aimed at the
connection of terminals supporting packet data services to a fixed infrastructure, both private and public.
DECT Packet Radio Service defines several operation modes, named Classes, and several transported services and
protocols, that may be frame relay or character oriented.
• Class 1 does not use a network layer C-plane and provides a service similar to a Wireless Local Area Network.
• Class 2 implements full DPRS capabilities, including complete C-plane with call control and mobility
management, and provides all capabilities of the packet service of public cellular networks (i.e. GPRS). Both
services Class 1 and Class 2 support multiberaer and asymmetric connections, and implement Management
Entity procedures intended to achieve maximum performance, optimal efficiency and minimal access times.
• Class 3 and Class 4 are simplified modes intended for auxiliary data services in voice terminals or other
moderate rate data services.
The annexes to the present document contain the conventions for interworking of the frame-relay and character oriented
services, as well as, other relevant information. The following services are defined in the present document:
Frame relay services:
• LAN IEEE 802.3 [13] (also known as ISO/IEC 8802-3), (clause B.4).
• LAN IEEE 802.5 [14] (also known as ISO/IEC 8802-5), (clause B.5).
• Internet Protocol (IP) [15], (clause B.6).
• Point to Point Protocol (PPP) [16], (clause B.7).
• Generic interworking (clause B.8) that allows the direct transport of other protocols.
Character Oriented Services:
• V.24 asynchronous interface, including a Packet Assembler and Disasembler (PAD) module (annex C).
The present document defines the additional requirements on the Physical Layer (PHL), Medium Access Control
(MAC) layer, Data Link Control (DLC) layer and Network (NWK) layer of DECT. The standard also specifies
Management Entity (ME) requirements, which ensure the efficient use of the DECT spectrum.
The present document includes New Generation DECT, a further development of the DECT standard introducing
wideband speech, improved data services, new slot types and other technical enhancements.
Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Paketna radijska storitev DECT (DPRS)
Ta dokument določa standard za paketne radijske storitve za digitalne izboljšane brezvrvične
telekomunikacijske (DECT) sisteme, skladne z ETSI EN 300 175-1 [1] do ETSI EN 300 175-8 [8]. To je podlaga za profile, ki določajo bolj specifične aplikacije (profili aplikacijsko specifičnega dostopa – ASAP), namenjene povezavi terminalov, ki podpirajo paketne podatkovne storitve, z javno in zasebno fiksno infrastrukturo.
Paketna radijska storitev digitalnih izboljšanih brezvrvičnih telekomunikacij opredeljuje več načinov delovanja, ki se imenujejo razredi, ter več prenesenih storitev in protokolov, ki so lahko storitve blokovnega posredovanja ali pa znakovno usmerjene storitve.
• Razred 1 ne uporablja C-ravni omrežne plasti in zagotavlja podobno storitev kot brezžično lokalno omrežje.
• Razred 2 izvaja vse zmogljivosti DPRS, vključno s celotno C-ravnjo z nadzorom klicev in upravljanjem mobilnosti, ter zagotavlja vse zmogljivosti paketne storitve za javna celična omrežja (tj. GPRS). Storitve razreda 1 in razreda 2 podpirajo večnosilne in asimetrične povezave ter izvajajo postopke upravnega subjekta, namenjene doseganju čim večje zmogljivosti, optimalne uspešnosti in minimalnega časa za dostop.
• Razred 3 in razred 4 sta poenostavljena načina, ki se uporabljata pri pomožnih podatkovnih storitvah v glasovnih terminalih ali drugih podatkovnih storitvah po zmerni stopnji.
Dodatki k temu dokumentu vsebujejo dogovore o medsebojnem delovanju storitev blokovnega posredovanja in znakovno usmerjenih storitev ter druge ustrezne informacije. V tem dokumentu so opredeljene naslednje storitve:
Storitve blokovnega posredovanja:
• LAN IEEE 802.3 [13] (znane tudi kot ISO/IEC 8802-3), (točka B.4).
• LAN IEEE 802.5 [14] (znane tudi kot ISO/IEC 8802-5), (točka B.5).
• Internetni protokol (IP) [15], (točka B.6).
• Protokol od točke do točke (PPP) [16], (točka B.7).
• Splošno medsebojno delovanje (točka B.8), ki omogoča neposreden prenos drugih protokolov.
Znakovno usmerjene storitve:
• Asinhroni vmesnik V.24, vključno z modulom za sestavljanje in razstavljanje paketov (PAD) (dodatek C).
Ta dokument določa dodatne zahteve za fizično plast (PHL), plast krmiljenja dostopa do prenosnega medija (MAC), plast krmiljenja podatkovnih povezav (DLC) in omrežno plast (NWK) digitalnih izboljšanih brezvrvičnih telekomunikacij. Standard določa tudi zahteve upravnega subjekta (ME), ki zagotavljajo učinkovito uporabo spektra digitalnih izboljšanih brezvrvičnih telekomunikacij. Ta dokument vključuje novo generacijo digitalnih izboljšanih brezvrvičnih telekomunikacij, nadaljnji razvoj standarda za digitalne izboljšane brezvrvične telekomunikacije, ki uvaja širokopasovni govor, izpopolnjene podatkovne storitve, nove tipe rež in druge tehnične izpopolnitve.
General Information
Buy Standard
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:EN 301 649 V2.3.1SIST EN 301 649 V2.3.1:2015en,fr,de01-oktober-2015SIST EN 301 649 V2.3.1:2015SLOVENSKI
STANDARD
SIST EN 301 649 V2.3.1:2015
ETSI EN 301 649 V2.3.1 (2015-03) Digital Enhanced Cordless Telecommunications (DECT); DECT Packet Radio Service (DPRS)
EUROPEAN STANDARD SIST EN 301 649 V2.3.1:2015
ETSI ETSI EN 301 649 V2.3.1 (2015-03)2
Reference REN/DECT-00305 Keywords access, data, DECT, DPRS, frame relay, IMT-2000, internet, interoperability, interworking, IP, IPv6, LAN, mobility, multimedia, packet mode, profile, radio, synchronization, TDD, TDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice The present document can be downloaded from: http://www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: https://portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 649 V2.3.1:2015
ETSI ETSI EN 301 649 V2.3.1 (2015-03)3 Contents Intellectual Property Rights . 15 Foreword . 15 Modal verbs terminology . 15 1 Scope . 16 2 References . 16 2.1 Normative references . 16 2.2 Informative references . 18 3 Definitions, symbols and abbreviations . 19 3.1 Definitions . 19 3.2 Symbols . 20 3.3 Abbreviations . 21 4 Description of services . 24 4.1 The DECT Packet Radio Service (DPRS) . 24 4.1.1 Service objectives . 24 4.1.2 Characteristics of the DECT packet data service . 25 4.1.3 Performance Objectives . 25 4.1.4 DPRS U-plane Services . 26 4.1.5 DPRS operation modes (Classes) . 27 4.1.6 DPRS System Categories . 27 4.2 Protocol architecture. 28 4.2.1 Reference configuration for Internet Protocol and LANs . 29 4.2.1.1 Reference configuration for Internet Protocol . 29 4.2.1.2 Reference configuration for IEEE 802.3 [13] . 30 4.3 Service and feature definitions . 30 4.3.1 PHL service definitions . 30 4.3.2 MAC service definitions . 31 4.3.3 DLC service definitions . 33 4.3.4 NWK feature definitions . 34 4.3.5 Application service definitions . 36 4.3.6 Distributed Communication . 36 4.3.7 Management Entity . 36 4.3.8 Call Control (CC) and Mobility Management (MM) Service Class . 37 4.3.9 U-plane Service and Interworking type . 37 4.3.10 DPRS System Categories . 37 4.4 General Class/Service/Interworking support . 38 4.5 System categories . 38 4.5.1 Mapping between DPRS categories and features/services . 38 4.5.2 Supported data rates for equipment declaring compliance to a data category . 40 4.5.3 Indication of compliance with a data category . 42 5 PHL requirements . 43 5.1 Physical Layer services . 43 5.2 Modulation schemes . 43 5.3 PHL service to procedure mapping . 44 5.4 PHL layer procedures . 44 5.4.1 General radio requirements . 44 5.4.2 Minimum Normal Transmit Power (NTP) . 44 5.4.3 Radio receiver sensitivity . 45 5.4.4 Z-field . 45 5.4.5 Sliding collision detection . 45 5.4.6 Physical channel availability. 45 5.4.7 Synchronization window . 45 5.4.8 Power management . 45 5.4.9 Fast hopping radio . 45 6 MAC layer requirements . 45 SIST EN 301 649 V2.3.1:2015
ETSI ETSI EN 301 649 V2.3.1 (2015-03)4 6.1 MAC services . 45 6.2 MAC service to procedure mapping . 47 7 DLC-layer requirements . 52 7.1 DLC services . 52 7.2 DLC feature to procedure mapping . 52 8 NWK layer requirements. 53 8.1 NWK features . 54 8.2 NWK feature to procedure mapping . 55 8.3 Application features . 59 8.4 Application feature to procedure mapping . 59 8.5 Distributed Communications . 60 8.5.1 Distributed Communications features . 60 8.6 Distributed Communications feature to procedure mapping . 60 9 Management Entity Requirements . 60 9.1 Introduction . 60 9.1.1 Management Entity (ME) operation modes . 60 9.1.2 Management Entity (ME) mode to procedures mapping . 61 9.2 Description of the DPRS operation principles. 62 9.2.1 General . 62 9.2.2 Service class 1 . 62 9.2.3 Service class 2 . 62 9.2.4 Service class 3 . 62 9.2.5 Service class 4 . 63 9.3 Resource and physical connection management for Class 1 and Class 2 systems . 63 9.3.1 Requirements applicable to the Fixed Part (FP) . 63 9.3.1.1 Conditions for resumption and management procedures . 63 9.3.1.1.1 General . 63 9.3.1.1.2 ME procedures for FT initiated connection resumption . 63 9.3.1.2 Connection Suspension conditions . 65 9.3.1.2.1 General . 65 9.3.1.2.2 Connection suspension due to no data activity . 65 9.3.1.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth command) . 65 9.3.1.2.4 Connection suspension by loss of all received bearers . 65 9.3.1.2.5 Activation of Fast Scan mode and/or high duty cycle paging detection after Connection suspension . 66 9.3.1.3 Conditions for Bandwidth modification . 66 9.3.1.3.1 General . 66 9.3.2 Requirements applicable to the Portable Part (PP) . 66 9.3.2.1 Conditions for connection resumption . 66 9.3.2.1.1 Procedure for PT initiated Connection resumption . 66 9.3.2.1.2 "RFP-busy-for-data" flag . 67 9.3.2.1.3 Waiting time for collision avoidance after deactivation of "RFP-busy-for-data" flag . 67 9.3.2.1.4 Bandwidth after resumption . 67 9.3.2.1.5 Resumption rejection by the FT . 67 9.3.2.2 Conditions for Connection Suspension . 67 9.3.2.2.1 General . 67 9.3.2.2.2 Connection suspension due to no data activity . 67 9.3.2.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth command) . 68 9.3.2.2.4 Connection suspension by loss of all received bearers . 68 9.3.2.2.5 Activation of fast scan mode after Connection suspension . 68 9.3.2.3 Conditions for Bandwidth modification . 68 9.3.2.3.1 General . 68 9.3.2.3.2 Rules for the bandwidth request by the PP . 68 9.4 Logical Connection and virtual call management . 69 9.4.1 Requirements for class 1 devices . 69 9.4.2 Requirements for class 2 devices . 69 9.4.2.1 General Description . 69 9.4.2.2 Normal procedures of virtual call setup and release. 69 SIST EN 301 649 V2.3.1:2015
ETSI ETSI EN 301 649 V2.3.1 (2015-03)5 9.4.2.2.1 Identification of the call as a DPRS call . 69 9.4.2.2.2 Bandwidth attributes of the call . 69 9.4.2.2.3 Creation of DLC link and MAC logical connection. . 70 9.4.2.2.4 Temporary states during the setup procedure . 70 9.4.2.3 Abnormal release of Virtual Calls . 70 9.4.2.4 Release of Logical Connection . 70 9.4.2.5 The handshake (stay alive) procedure . 70 9.4.3 Requirements for class 3 devices . 71 9.4.3.1 General Description . 71 9.4.3.1.1 Identification of the call as a DPRS call . 71 9.4.3.1.2 Connection attributes . 71 9.4.4 Requirements for class 4 devices . 71 9.4.4.1 General Description . 71 9.4.4.1.1 Identification of the call as a DPRS call . 72 9.5 Resource and physical connection management for Class 3 and Class 4 devices . 72 9.5.1 Simplified Class 3 connection management . 72 9.5.2 Suspend management (Tx side) . 72 9.5.3 Suspend management (Rx side) . 72 9.5.4 Resume management . 72 9.5.5 Stay alive (timer control) . 72 9.5.6 Stay alive (periodic resume) . 72 9.5.7 Simplified Class 4 connection management . 73 10 MAC layer procedures . 73 10.1 General . 73 10.1.1 Frame and multiframe structure . 73 10.1.2 Bit mappings . 73 10.1.2.1 Multiple bitmappings rule . 73 10.1.3 Void . 73 10.1.4 Scrambling . 73 10.1.5 Error control. 73 10.1.6 Void . 73 10.1.7 Void . 73 10.1.8 RFP idle receiver scan sequence . 74 10.1.9 PT receiver scan sequence . 74 10.1.10 PT states and state transitions . 74 10.1.10.1 PT states and state transitions for PTs not supporting fast setup . 74 10.1.10.2 PT states and state transitions for PTs supporting fast setup . 74 10.1.10.2.1 Fast setup control information provided by the FT . 75 10.1.10.2.2 PT states and state transitions when PT and FT supports complete setup detection . 75 10.1.10.2.3 PT states and state transitions when PT and FT supports Selective setup detection only . 76 10.1.10.2.4 Fast setup control information provided using MAC paging . 76 10.1.11 Identities . 77 10.2 Non continuous broadcast . 77 10.2.1 Request for specific Q channel information. 77 10.2.2 Request for a new dummy . 77 10.3 Downlink broadcast . 77 10.3.1 NT messages . 77 10.3.2 QT messages . 77 10.3.2.1 QT - static system information . 77 10.3.2.2 QT - FP capabilities . 78 10.3.2.2.1 Standard FP Capabilities . 78 10.3.2.2.2 Extended FP Capabilities. 79 10.3.2.2.3 Extended FP Capabilities part 2 . 79 10.3.2.3 QT - SARI list contents . 80 10.3.2.4 Multiframe number . 80 10.4 Paging broadcast . 80 10.4.1 Paging message formats . 80 10.4.1.1 Long or full page message format . 81 10.4.1.2 Short page message format . 81 10.4.1.3 Zero length page message format . 82 10.4.1.4 MAC resume and control page message format. 82 SIST EN 301 649 V2.3.1:2015
ETSI ETSI EN 301 649 V2.3.1 (2015-03)6 10.4.1.5 MAC layer information in zero and short length paging messages. 83 10.4.1.5.1 RFP status . 83 10.4.2 MAC layer information messages procedures . 84 10.4.2.1 Blind slot information for circuit mode service . 84 10.4.2.2 Bearer handover/replacement information . 84 10.4.2.3 Other bearer position . 84 10.4.2.4 Recommended other bearer position . 84 10.4.2.5 Dummy or C/L bearer position . 84 10.4.2.6 C/L bearer position . 84 10.4.2.7 RFP-status and Modulation Types . 85 10.4.2.8 Blind slot information for packet mode service . 85 10.4.3 Paging Procedures . 85 10.4.3.1
...
ETSI EN 301 649 V2.3.1 (2015-03)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
DECT Packet Radio Service (DPRS)
---------------------- Page: 1 ----------------------
2 ETSI EN 301 649 V2.3.1 (2015-03)
Reference
REN/DECT-00305
Keywords
access, data, DECT, DPRS, frame relay,
IMT-2000, internet, interoperability, interworking,
IP, IPv6, LAN, mobility, multimedia, packet mode,
profile, radio, synchronization, TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2015.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 301 649 V2.3.1 (2015-03)
Contents
Intellectual Property Rights . 15
Foreword . 15
Modal verbs terminology . 15
1 Scope . 16
2 References . 16
2.1 Normative references . 16
2.2 Informative references . 18
3 Definitions, symbols and abbreviations . 19
3.1 Definitions . 19
3.2 Symbols . 20
3.3 Abbreviations . 21
4 Description of services . 24
4.1 The DECT Packet Radio Service (DPRS) . 24
4.1.1 Service objectives . 24
4.1.2 Characteristics of the DECT packet data service . 25
4.1.3 Performance Objectives . 25
4.1.4 DPRS U-plane Services . 26
4.1.5 DPRS operation modes (Classes) . 27
4.1.6 DPRS System Categories . 27
4.2 Protocol architecture. 28
4.2.1 Reference configuration for Internet Protocol and LANs . 29
4.2.1.1 Reference configuration for Internet Protocol . 29
4.2.1.2 Reference configuration for IEEE 802.3 [13] . 30
4.3 Service and feature definitions . 30
4.3.1 PHL service definitions . 30
4.3.2 MAC service definitions . 31
4.3.3 DLC service definitions . 33
4.3.4 NWK feature definitions . 34
4.3.5 Application service definitions . 36
4.3.6 Distributed Communication . 36
4.3.7 Management Entity . 36
4.3.8 Call Control (CC) and Mobility Management (MM) Service Class . 37
4.3.9 U-plane Service and Interworking type . 37
4.3.10 DPRS System Categories . 37
4.4 General Class/Service/Interworking support . 38
4.5 System categories . 38
4.5.1 Mapping between DPRS categories and features/services . 38
4.5.2 Supported data rates for equipment declaring compliance to a data category . 40
4.5.3 Indication of compliance with a data category . 42
5 PHL requirements . 43
5.1 Physical Layer services . 43
5.2 Modulation schemes . 43
5.3 PHL service to procedure mapping . 44
5.4 PHL layer procedures . 44
5.4.1 General radio requirements . 44
5.4.2 Minimum Normal Transmit Power (NTP) . 44
5.4.3 Radio receiver sensitivity . 45
5.4.4 Z-field . 45
5.4.5 Sliding collision detection . 45
5.4.6 Physical channel availability. 45
5.4.7 Synchronization window . 45
5.4.8 Power management . 45
5.4.9 Fast hopping radio . 45
6 MAC layer requirements . 45
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 301 649 V2.3.1 (2015-03)
6.1 MAC services . 45
6.2 MAC service to procedure mapping . 47
7 DLC-layer requirements . 52
7.1 DLC services . 52
7.2 DLC feature to procedure mapping . 52
8 NWK layer requirements. 53
8.1 NWK features . 54
8.2 NWK feature to procedure mapping . 55
8.3 Application features . 59
8.4 Application feature to procedure mapping . 59
8.5 Distributed Communications . 60
8.5.1 Distributed Communications features . 60
8.6 Distributed Communications feature to procedure mapping . 60
9 Management Entity Requirements . 60
9.1 Introduction . 60
9.1.1 Management Entity (ME) operation modes . 60
9.1.2 Management Entity (ME) mode to procedures mapping . 61
9.2 Description of the DPRS operation principles. 62
9.2.1 General . 62
9.2.2 Service class 1 . 62
9.2.3 Service class 2 . 62
9.2.4 Service class 3 . 62
9.2.5 Service class 4 . 63
9.3 Resource and physical connection management for Class 1 and Class 2 systems . 63
9.3.1 Requirements applicable to the Fixed Part (FP) . 63
9.3.1.1 Conditions for resumption and management procedures . 63
9.3.1.1.1 General . 63
9.3.1.1.2 ME procedures for FT initiated connection resumption . 63
9.3.1.2 Connection Suspension conditions . 65
9.3.1.2.1 General . 65
9.3.1.2.2 Connection suspension due to no data activity . 65
9.3.1.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth
command) . 65
9.3.1.2.4 Connection suspension by loss of all received bearers . 65
9.3.1.2.5 Activation of Fast Scan mode and/or high duty cycle paging detection after Connection
suspension . 66
9.3.1.3 Conditions for Bandwidth modification . 66
9.3.1.3.1 General . 66
9.3.2 Requirements applicable to the Portable Part (PP) . 66
9.3.2.1 Conditions for connection resumption . 66
9.3.2.1.1 Procedure for PT initiated Connection resumption . 66
9.3.2.1.2 "RFP-busy-for-data" flag . 67
9.3.2.1.3 Waiting time for collision avoidance after deactivation of "RFP-busy-for-data" flag . 67
9.3.2.1.4 Bandwidth after resumption . 67
9.3.2.1.5 Resumption rejection by the FT . 67
9.3.2.2 Conditions for Connection Suspension . 67
9.3.2.2.1 General . 67
9.3.2.2.2 Connection suspension due to no data activity . 67
9.3.2.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth
command) . 68
9.3.2.2.4 Connection suspension by loss of all received bearers . 68
9.3.2.2.5 Activation of fast scan mode after Connection suspension . 68
9.3.2.3 Conditions for Bandwidth modification . 68
9.3.2.3.1 General . 68
9.3.2.3.2 Rules for the bandwidth request by the PP . 68
9.4 Logical Connection and virtual call management . 69
9.4.1 Requirements for class 1 devices . 69
9.4.2 Requirements for class 2 devices . 69
9.4.2.1 General Description . 69
9.4.2.2 Normal procedures of virtual call setup and release. 69
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 301 649 V2.3.1 (2015-03)
9.4.2.2.1 Identification of the call as a DPRS call . 69
9.4.2.2.2 Bandwidth attributes of the call . 69
9.4.2.2.3 Creation of DLC link and MAC logical connection. . 70
9.4.2.2.4 Temporary states during the setup procedure . 70
9.4.2.3 Abnormal release of Virtual Calls . 70
9.4.2.4 Release of Logical Connection . 70
9.4.2.5 The handshake (stay alive) procedure . 70
9.4.3 Requirements for class 3 devices . 71
9.4.3.1 General Description . 71
9.4.3.1.1 Identification of the call as a DPRS call . 71
9.4.3.1.2 Connection attributes . 71
9.4.4 Requirements for class 4 devices . 71
9.4.4.1 General Description . 71
9.4.4.1.1 Identification of the call as a DPRS call . 72
9.5 Resource and physical connection management for Class 3 and Class 4 devices . 72
9.5.1 Simplified Class 3 connection management . 72
9.5.2 Suspend management (Tx side) . 72
9.5.3 Suspend management (Rx side) . 72
9.5.4 Resume management . 72
9.5.5 Stay alive (timer control) . 72
9.5.6 Stay alive (periodic resume) . 72
9.5.7 Simplified Class 4 connection management . 73
10 MAC layer procedures . 73
10.1 General . 73
10.1.1 Frame and multiframe structure . 73
10.1.2 Bit mappings . 73
10.1.2.1 Multiple bitmappings rule . 73
10.1.3 Void . 73
10.1.4 Scrambling . 73
10.1.5 Error control. 73
10.1.6 Void . 73
10.1.7 Void . 73
10.1.8 RFP idle receiver scan sequence . 74
10.1.9 PT receiver scan sequence . 74
10.1.10 PT states and state transitions . 74
10.1.10.1 PT states and state transitions for PTs not supporting fast setup . 74
10.1.10.2 PT states and state transitions for PTs supporting fast setup . 74
10.1.10.2.1 Fast setup control information provided by the FT . 75
10.1.10.2.2 PT states and state transitions when PT and FT supports complete setup detection . 75
10.1.10.2.3 PT states and state transitions when PT and FT supports Selective setup detection only . 76
10.1.10.2.4 Fast setup control information provided using MAC paging . 76
10.1.11 Identities . 77
10.2 Non continuous broadcast . 77
10.2.1 Request for specific Q channel information. 77
10.2.2 Request for a new dummy . 77
10.3 Downlink broadcast . 77
10.3.1 N messages . 77
T
10.3.2 Q messages . 77
T
10.3.2.1 QT - static system information . 77
10.3.2.2 Q - FP capabilities . 78
T
10.3.2.2.1 Standard FP Capabilities . 78
10.3.2.2.2 Extended FP Capabilities. 79
10.3.2.2.3 Extended FP Capabilities part 2 . 79
10.3.2.3 Q - SARI list contents . 80
T
10.3.2.4 Multiframe number . 80
10.4 Paging broadcast . 80
10.4.1 Paging message formats . 80
10.4.1.1 Long or full page message format . 81
10.4.1.2 Short page message format . 81
10.4.1.3 Zero length page message format . 82
10.4.1.4 MAC resume and control page message format. 82
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 301 649 V2.3.1 (2015-03)
10.4.1.5 MAC layer information in zero and short length paging messages. 83
10.4.1.5.1 RFP status . 83
10.4.2 MAC layer information messages procedures . 84
10.4.2.1 Blind slot information for circuit mode service . 84
10.4.2.2 Bearer handover/replacement information . 84
10.4.2.3 Other bearer position . 84
10.4.2.4 Recommended other bearer position . 84
10.4.2.5 Dummy or C/L bearer position . 84
10.4.2.6 C/L bearer position . 84
10.4.2.7 RFP-status and Modulation Types . 85
10.4.2.8 Blind slot information for packet mode service . 85
10.4.3 Paging Procedures . 85
10.4.3.1 LCE Paging .
...
Draft ETSI EN 301 649 V2.3.0 (2014-11)
EUROPEAN STANDARD
Digital Enhanced Cordless Telecommunications (DECT);
DECT Packet Radio Service (DPRS)
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 301 649 V2.3.0 (2014-11)
Reference
REN/DECT-00305
Keywords
access, data, DECT, DPRS, frame relay,
IMT-2000, internet, interoperability, interworking,
IP, IPv6, LAN, mobility, multimedia, packet mode,
profile, radio, synchronization, TDD, TDMA
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
The present document can be downloaded from:
http://www.etsi.org
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2014.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 301 649 V2.3.0 (2014-11)
Contents
Intellectual Property Rights . 15
Foreword . 15
Modal verbs terminology . 15
1 Scope . 16
2 References . 16
2.1 Normative references . 17
2.2 Informative references . 18
3 Definitions, symbols and abbreviations . 19
3.1 Definitions . 19
3.2 Symbols . 20
3.3 Abbreviations . 21
4 Description of services . 24
4.1 The DECT Packet Radio Service (DPRS) . 24
4.1.1 Service objectives . 24
4.1.2 Characteristics of the DECT packet data service . 25
4.1.3 Performance Objectives . 26
4.1.4 DPRS U-plane Services . 26
4.1.5 DPRS operation modes (Classes) . 27
4.1.6 DPRS System Categories . 27
4.2 Protocol architecture. 28
4.2.1 Reference configuration for Internet Protocol and LANs . 29
4.2.1.1 Reference configuration for Internet Protocol . 29
4.2.1.2 Reference configuration for IEEE 802.3 [13] . 30
4.3 Service and feature definitions . 30
4.3.1 PHL service definitions . 31
4.3.2 MAC service definitions . 31
4.3.3 DLC service definitions . 33
4.3.4 NWK feature definitions . 34
4.3.5 Application service definitions . 36
4.3.6 Distributed Communication . 36
4.3.7 Management Entity . 36
4.3.8 Call Control (CC) and Mobility Management (MM) Service Class . 37
4.3.9 U-plane Service and Interworking type . 37
4.3.10 DPRS System Categories . 37
4.4 General Class/Service/Interworking support . 38
4.5 System categories . 38
4.5.1 Mapping between DPRS categories and features/services . 38
4.5.2 Supported data rates for equipment declaring compliance to a data category . 40
4.5.3 Indication of compliance with a data category . 42
5 PHL requirements . 43
5.1 Physical Layer services . 43
5.2 Modulation schemes . 43
5.3 PHL service to procedure mapping . 44
5.4 PHL layer procedures . 44
5.4.1 General radio requirements . 44
5.4.2 Minimum Normal Transmit Power (NTP) . 44
5.4.3 Radio receiver sensitivity . 45
5.4.4 Z-field . 45
5.4.5 Sliding collision detection . 45
5.4.6 Physical channel availability. 45
5.4.7 Synchronization window . 45
5.4.8 Power management . 45
5.4.9 Fast hopping radio . 45
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 301 649 V2.3.0 (2014-11)
6 MAC layer requirements . 46
6.1 MAC services . 46
6.2 MAC service to procedure mapping . 47
7 DLC-layer requirements . 52
7.1 DLC services . 52
7.2 DLC feature to procedure mapping . 52
8 NWK layer requirements. 53
8.1 NWK features . 54
8.2 NWK feature to procedure mapping . 55
8.3 Application features . 59
8.4 Application feature to procedure mapping . 60
8.5 Distributed Communications . 60
8.5.1 Distributed Communications features . 60
8.6 Distributed Communications feature to procedure mapping . 60
9 Management Entity Requirements . 61
9.1 Introduction . 61
9.1.1 Management Entity (ME) operation modes . 61
9.1.2 Management Entity (ME) mode to procedures mapping . 62
9.2 Description of the DPRS operation principles. 62
9.2.1 General . 62
9.2.2 Service class 1 . 63
9.2.3 Service class 2 . 63
9.2.4 Service class 3 . 63
9.2.5 Service class 4 . 63
9.3 Resource and physical connection management for Class 1 and Class 2 systems . 64
9.3.1 Requirements applicable to the Fixed Part (FP) . 64
9.3.1.1 Conditions for resumption and management procedures . 64
9.3.1.1.1 General . 64
9.3.1.1.2 ME procedures for FT initiated connection resumption . 64
9.3.1.2 Connection Suspension conditions . 66
9.3.1.2.1 General . 66
9.3.1.2.2 Connection suspension due to no data activity . 66
9.3.1.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth
command) . 66
9.3.1.2.4 Connection suspension by loss of all received bearers . 66
9.3.1.2.5 Activation of Fast Scan mode and/or high duty cycle paging detection after Connection
suspension . 67
9.3.1.3 Conditions for Bandwidth modification . 67
9.3.1.3.1 General . 67
9.3.2 Requirements applicable to the Portable Part (PP) . 67
9.3.2.1 Conditions for connection resumption . 67
9.3.2.1.1 Procedure for PT initiated Connection resumption . 68
9.3.2.1.2 "RFP-busy-for-data" flag . 68
9.3.2.1.3 Waiting time for collision avoidance after deactivation of "RFP-busy-for-data" flag . 68
9.3.2.1.4 Bandwidth after resumption . 68
9.3.2.1.5 Resumption rejection by the FT . 68
9.3.2.2 Conditions for Connection Suspension . 68
9.3.2.2.1 General . 68
9.3.2.2.2 Connection suspension due to no data activity . 69
9.3.2.2.3 Connection suspension due to violation of the minimum number of bearers (MAC Bandwidth
command) . 69
9.3.2.2.4 Connection suspension by loss of all received bearers . 69
9.3.2.2.5 Activation of fast scan mode after Connection suspension . 69
9.3.2.3 Conditions for Bandwidth modification . 69
9.3.2.3.1 General . 69
9.3.2.3.2 Rules for the bandwidth request by the PP . 69
9.4 Logical Connection and virtual call management . 70
9.4.1 Requirements for class 1 devices . 70
9.4.2 Requirements for class 2 devices . 70
9.4.2.1 General Description . 70
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 301 649 V2.3.0 (2014-11)
9.4.2.2 Normal procedures of virtual call setup and release. 71
9.4.2.2.1 Identification of the call as a DPRS call . 71
9.4.2.2.2 Bandwidth attributes of the call . 71
9.4.2.2.3 Creation of DLC link and MAC logical connection. . 71
9.4.2.2.4 Temporary states during the setup procedure . 71
9.4.2.3 Abnormal release of Virtual Calls . 71
9.4.2.4 Release of Logical Connection . 72
9.4.2.5 The handshake (stay alive) procedure . 72
9.4.3 Requirements for class 3 devices . 73
9.4.3.1 General Description . 73
9.4.3.1.1 Identification of the call as a DPRS call . 73
9.4.3.1.2 Connection attributes . 73
9.4.4 Requirements for class 4 devices . 73
9.4.4.1 General Description . 73
9.4.4.1.1 Identification of the call as a DPRS call . 73
9.5 Resource and physical connection management for Class 3 and Class 4 devices . 73
9.5.1 Simplified Class 3 connection management . 73
9.5.2 Suspend management (Tx side) . 73
9.5.3 Suspend management (Rx side) . 74
9.5.4 Resume management . 74
9.5.5 Stay alive (timer control) . 74
9.5.6 Stay alive (periodic resume) . 74
9.5.7 Simplified Class 4 connection management . 74
10 MAC layer procedures . 74
10.1 General . 74
10.1.1 Frame and multiframe structure . 74
10.1.2 Bit mappings . 75
10.1.2.1 Multiple bitmappings rule . 75
10.1.3 Void . 75
10.1.4 Scrambling . 75
10.1.5 Error control. 75
10.1.6 Void . 75
10.1.7 Void . 75
10.1.8 RFP idle receiver scan sequence . 75
10.1.9 PT receiver scan sequence . 75
10.1.10 PT states and state transitions . 76
10.1.10.1 PT states and state transitions for PTs not supporting fast setup . 76
10.1.10.2 PT states and state transitions for PTs supporting fast setup . 76
10.1.10.2.1 Fast setup control information provided by the FT . 77
10.1.10.2.2 PT states and state transitions when PT and FT supports complete setup detection . 77
10.1.10.2.3 PT states and state transitions when PT and FT supports Selective setup detection only . 78
10.1.10.2.4 Fast setup control information provided using MAC paging . 78
10.1.11 Identities . 78
10.2 Non continuous broadcast . 79
10.2.1 Request for specific Q channel information. 79
10.2.2 Request for a new dummy . 79
10.3 Downlink broadcast . 79
10.3.1 N messages . 79
T
10.3.2 Q messages . 80
T
10.3.2.1 Q - static system information . 80
T
10.3.2.2 Q - FP capabilities . 81
T
10.3.2.2.1 Standard FP Capabilities . 81
10.3.2.2.2 Extended FP Capabilities. 81
10.3.2.2.3 Extended FP Capabilities part 2 . 82
10.3.2.3 Q - SARI list contents . 82
T
10.3.2.4 Multiframe number . 82
10.4 Paging broadcast . 83
10.4.1 Paging message formats . 83
10.4.1.1 Long or full page message format . 83
10.4.1.2 Short page message format . 84
10.4.1.3 Zero length page message format . 84
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 301 649 V2.3.0 (2014-11)
10.4.1.4 MAC resume and control page message format. 85
10.4.1.5 MAC layer information in zero and short length paging messages. 85
10.4.1.5.1 RFP status .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.