SIST EN 4641-101:2015
(Main)Aerospace series - Cables, optical 125 μm diameter cladding - Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter - Product standard
Aerospace series - Cables, optical 125 μm diameter cladding - Part 101: Tight structure 62,5 μm core GI fibre 0,9 mm outside diameter - Product standard
This product standard specifies the general characteristics, conditions for qualification, acceptance and quality
assurance for a fibre optic cable with a 62,5/125 μm Graded Index fibre core, 0,9 mm outside diameter and of
tight buffer construction, for inside wiring applications.
Luft- und Raumfahrt - Lichtwellenleiterkabel, Manteldurchmesser 125 μm - Teil 101: 62,5 μm Kerndurchmesser, Gradientenindexfaser Außendurchmesser 0,9 mm Leitung mit festem Aufbau - Produktnorm
Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 μm - Partie 101 : Câble à structure serrée, fibre à gardient d'indice cœur 62,5 μm, diamètre extérieur 0,9 mm - Norme de produit
Aeronavtika - Kabli, optični, zunanji premer obloge 125 µm - 101. del: Kompaktna struktura 62,5 µm, zunanji premer vlakna 0,9 mm - Standard za proizvod
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.L]YRG49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4641-101:2015SIST EN 4641-101:2015en,fr,de01-junij-2015SIST EN 4641-101:2015SLOVENSKI
STANDARD
SIST EN 4641-101:2015
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4641-101
April 2015 ICS 49.090 English Version
Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard
Série aérospatiale - Câbles, optiques, diamètre extérieur de la gaine optique 125 µm - Partie 101 : Câbles à structure serrée, fibre à gradient d'indice coeur 62,5 µm, diamètre extérieur 0,9 mm - Norme de produit
Luft- und Raumfahrt - Lichtwellenleiterkabel, Mantelaußendurchmesser 125 µm - Teil 101: Vollader, 62,5 µm GI-Faser, Kabelaußendurchmesser 0,9 mm
- Produktnorm This European Standard was approved by CEN on 29 November 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4641-101:2015 ESIST EN 4641-101:2015
EN 4641-101:2015 (E) 2 Contents
Page coreword .3 1 Scope .4 2 kormative references .4 3 qerms and definitions .4 4 oequired characteristics .4 5 Materials and description .5 6 qest methods and performances in accordance with bk mqno-100 .5 q nuality assurance . 12 8 aesignationf marking and colours . 12 9 aelivery conditions . 13 10 ptorage . 13
SIST EN 4641-101:2015
EN 4641-101:2015 (E) 3 coreword This document (EN 4641-101:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2015, and conflicting national standards shall be withdrawn at the latest by October 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4641-101:2015
EN 4641-101:2015 (E) 4
1 Scope This product standard specifies the general characteristics, conditions for qualification, acceptance and quality assurance for a fibre optic cable with a 62,5/125 µm Graded Index fibre core, 0,9 mm outside diameter and of tight buffer construction, for inside wiring applications. 2 kormative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2812, Aerospace series — Stripping of electric cables EN 3745-100 (all parts), Aerospace series — Fibres and cables, optical, aircraft use — Test methods — Part 100: General EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables EN 3909, Aerospace series — Test fluids and test methods for electric components and sub-assemblies EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts TIA/EIA-455-30-B, FOTP-30 — Frequency Domain Measurement of Multimode 1) TIA/EIA-455-175-B, FOTP175 — Chromatic Dispersion Measurement of Single-mode Optical Fibers by the Differential Phase Shift Method 1) ANSI/EIA 4920000-A, Generic Specification for Optical Waveguide Fibers 1) 3 qerms and definitions For the purposes of this document, the terms and definitions given in EN 3745-100 apply. 4 oequired characteristics The characteristics of the cables, tested according to the methods described hereafter shall comply with the values defined in this product standard. See Table 1. Table 1 mroperty Value Cable mass ≤ 1 g/m Operating temperature −55 °C to 125 °C Minimum bend radius (20 °C) Installation: 10 mm (~10 × outside diameter) Long term: 10 mm (~10 × outside diameter) Storage: 20 mm (~20 × cable outside diameter) Tensile strength > 20 N
1) Published by: National (US) American National Standard Institute (www.ansi.org/). SIST EN 4641-101:2015
EN 4641-101:2015 (E) 5 5 Materials and description The following table details a breakdown of materials used in the construction of the fibre optic cable. The list of materials is not exclusive and any materials used in the construction of the cable must meet the required operating and qualification requirements whilst being compatible with termination processes, methods of retention or epoxy adhesive application used in those processes. See Figure 1 and Table 2.
hey 1 Optical fibre 2 Primary coating 3 Outer jacket cigure 1 Table 2 blement Material Fibre Core Silica Cladding Primary coating Silicone Outer jacket Halogen free high temperature copolymer
6 qest methods and performances in accordance with bk mqno-100 6.1 lptical fibre tests See Table 3. SIST EN 4641-101:2015
EN 4641-101:2015 (E) 6 Table 3 — lptical fibre test methods Test method bk mqno- aesignation of test qest conditions and results 201 Fibre visual examination The coating shall be continuous and free of visible defects such as lumps, abrasions, cracks, splits or blisters 202 Fibre core dimensions Core diameter: 62,5 µm ± 3 µm 202 Fibre dimension cladding diameter Cladding diameter: 25 µm ± 2 µm Method A or B Sample should be in accordance with test methods Number of sample: 1 202 Fibre dimension core non circularity Core non circularity: ≤ 5 % (3 µm) Number of sample: 1 202 Fibre dimension cladding non circularity Cladding non circularity: ≤ 2 % (2,5 µm) Number of sample: 1 202 Fibre dimension concentricity error Concentricity error: ≤ 3 µm Number of sample: 1 501 Optical fibre proof test > 1 % 301 Method A Fibre attenuation < 4 dB/km at 850 nm at 20 °C < 2 dB/km at 1 300 nm at 20 °C 302 Numerical aperture Numerical aperture: 0,275 ± 0,015 (0,26 to 0,29) Number of sample : 1 Length of the sample: 2 m Wavelength: 850 nm ± 20 nm 303 Bandwidth Bandwidth ≥ 160 Mhz.km at 850 nm Bandwidth ≥ 500 Mhz.km at 1 300 nm Number of sample: 1 Minimal length of the sample: 1 km Central wavelengths: 850 nm ± 10 nm
1 300 nm ± 10 nm Spectral width (−3 dB): ≤ 10 nm for 850 nm and 1 300 nm
6.2 Fibre optic cable See Table 4. SIST EN 4641-101:2015
EN 4641-101:2015 (E) q Table 4 — Fibre optic cable test methods (1 of 5) Test method bk mqno- aesignation of test qest conditions and results 201 Visual inspection The outer jack
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.