SIST EN 3745-411:2007
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids
This standard specifies methods of measuring the fluid resistance of a finished cable.
It shall be used together with EN 3745-100, EN 3909 and TR 4542.
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 411: Beständigkeit gegen Flüssigkeiten
Série aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 411 : Résistance aux fluides
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 411. del: Odpornost proti tekočinam
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluidsSérie aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 411 : Résistance aux fluidesLuft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 411: Beständigkeit gegen FlüssigkeitenTa slovenski standard je istoveten z:EN 3745-411:2007SIST EN 3745-411:2007en49.060Aerospace electric equipment and systemsICS:SLOVENSKI
STANDARDSIST EN 3745-411:200701-november-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-411August 2007ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 411: Resistance to fluidsSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 411 : Résistanceaux fluidesLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 411: Beständigkeitgegen FlüssigkeitenThis European Standard was approved by CEN on 23 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-411:2007: E
EN 3745-411:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Test procedures.4 4 Preparation of specimen.5 5 Methods.5 6 Requirements.5
EN 3745-411:2007 (E) 3 Foreword This document (EN 3745-411:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.