SIST EN 3745-202:2006
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensions
This standard specifies several methods for measuring the diameter of an optical fibre or cable, the non circularity and the concentricity of the fibre core/cladding on an optical fibre.
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 202: Faserabmessungen
Diese Norm legt mehrere Verfahren zum Messen des Durchmessers von Lichtwellenleitern oder Licht¬wellenleiterkabeln sowie der Unrundheit und Konzentrizität des Faserkerns/mantels von Lichtwellenleitern fest.
Série aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 202 : Dimensions de la fibre
Aeronavtika – Optična vlakna in kabli za uporabo v zračnih plovilih – Preskusne metode – 202. del: Mere vlaken
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 202: Fibre dimensionsSérie aérospatiale - Fibres et câbles optiques a usage aéronautique - Méthodes d'essais - Partie 202 : Dimensions de la fibreLuft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 202: FaserabmessungenTa slovenski standard je istoveten z:EN 3745-202:2005SIST EN 3745-202:2006en49.060ICS:SLOVENSKI
STANDARDSIST EN 3745-202:200601-julij-2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-202November 2005ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 202: Fibre dimensionsSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 202 :Dimensions de la fibreLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 202: Faserabmessun-genThis European Standard was approved by CEN on 19 September 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-202:2005: E
EN 3745-202:2005 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Preparation of specimens.4 4 Apparatus.4 5 Method.5
EN 3745-202:2005 (E) 3 Foreword This European Standard (EN 3745-202:2005) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-ceived the approval of the National Associations and the Official Services of the member countries of A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.