SIST ES 203 069 V1.2.1:2014
(Main)Access, Terminals, Transmission and Multiplexing (ATTM) - Remote management of CPE over broadband networks - CPE WAN Management Protocol (CWMP)
Access, Terminals, Transmission and Multiplexing (ATTM) - Remote management of CPE over broadband networks - CPE WAN Management Protocol (CWMP)
The present document defines a European Standard (ES) for remote management of CPE WAN interfaces over broadband networks. It provides an overview of a set of normative references to the suite of individual specifications comprising the Broadband Forum (BBF) CPE WAN Management Protocol (CWMP) and Data models.
Dostop, priključki, prenos in multipleksiranje (ATTM) - Daljinsko upravljanje opreme pri naročniku (CPE) prek širokopasovnih omrežij - Protokol za upravljanje prostranega omrežja opreme pri naročniku (CWMP)
Ta dokument določa evropski standard za daljinsko upravljanje vmesnikov prostranega omrežja opreme pri naročniku (CPE WAN). Zagotavlja pregled sklopa normativnih referenc za niz posameznih specifikacij, ki sestavljajo protokol za upravljanje prostranega omrežja opreme pri naročniku (CWMP) foruma Broadband Forum (BBF) in podatkovne modele.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST ES 203 069 V1.2.1:2014
01-julij-2014
'RVWRSSULNOMXþNLSUHQRVLQPXOWLSOHNVLUDQMH $770 'DOMLQVNRXSUDYOMDQMH
RSUHPHSULQDURþQLNX &3( SUHNãLURNRSDVRYQLKRPUHåLM3URWRNRO]DXSUDYOMDQMH
SURVWUDQHJDRPUHåMDRSUHPHSULQDURþQLNX &:03
Access, Terminals, Transmission and Multiplexing (ATTM) - Remote management of
CPE over broadband networks - CPE WAN Management Protocol (CWMP)
Ta slovenski standard je istoveten z: ES 203 069 Version 1.2.1
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
SIST ES 203 069 V1.2.1:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ES 203 069 V1.2.1:2014
---------------------- Page: 2 ----------------------
SIST ES 203 069 V1.2.1:2014
ETSI ES 203 069 V1.2.1 (2011-09)
ETSI Standard
Access, Terminals, Transmission and Multiplexing (ATTM);
Remote management of CPE over broadband networks;
CPE WAN Management Protocol (CWMP)
---------------------- Page: 3 ----------------------
SIST ES 203 069 V1.2.1:2014
2 ETSI ES 203 069 V1.2.1 (2011-09)
Reference
RES/ATTM-02014
Keywords
configuration, management, xDSL
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2011.
All rights reserved.
TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI
---------------------- Page: 4 ----------------------
SIST ES 203 069 V1.2.1:2014
3 ETSI ES 203 069 V1.2.1 (2011-09)
Contents
Intellectual Property Rights . 4
Foreword . 4
Introduction . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Conventions . 6
5 Recommendations . 7
6 Remote management of CPE over broadband networks . 8
6.1 Elements of the CPE WAN management protocol . 8
6.1.1 TR-069: CPE WAN management protocol (CWMP) . 8
6.1.2 Auto-configuration and dynamic service provisioning . 9
6.1.3 Software/firmware image management . 9
6.1.4 Status and performance monitoring . 9
6.1.5 Diagnostics . 9
6.1.6 Security . 9
6.2 Data models . 9
6.2.1 TR-181: Device data model for TR-069 . 10
6.2.2 TR-157: Component objects for CWMP . 10
6.2.3 TR-143: Enabling network throughput performance tests and statistical monitoring . 11
6.2.4 TR-104: DSLHome provisioning parameters for VoIP CPE . 11
6.2.5 TR-135: Data model for a TR-069 enabled set-top box. 11
6.2.6 TR-140: TR-069 data model for storage service enabled devices . 11
6.2.7 TR-196: Femto access point service data model . 12
Annex A (informative): Bibliography . 13
History . 14
ETSI
---------------------- Page: 5 ----------------------
SIST ES 203 069 V1.2.1:2014
4 ETSI ES 203 069 V1.2.1 (2011-09)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://ipr.etsi.org).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Access, Terminals, Transmission and
Multiplexing (ATTM).
Introduction
The basis of the present document is the Broadband Forum CPE WAN management protocol (CWMP), commonly
referred to as TR-069 [1].
The protocol is intended for communication between a CPE and an Auto-Configuration Server (ACS). The CPE WAN
management protocol defines a mechanism that encompasses secure auto-configuration of a CPE, and also incorporates
other CPE management functions into a common framework.
TR-069 [1] specifies the generic requirements of the management protocol, and methods that can be applied to any
TR-069 [1] CPE. Other Broadband Forum Technical Reports (TRs) specify the managed objects, or data models, for
specific types of devices or services.
The protocol can be used to manage various types of CPE, including stand-alone routers and LAN-side client devices. It
is agnostic to the specific access medium utilized by the service provider, although it does depend on IP-layer
connectivity having first been established by the device.
ETSI
---------------------- Page: 6 ----------------------
SIST ES 203 069 V1.2.1:2014
5 ETSI ES 203 069 V1.2.1 (2011-09)
1 Scope
The present document defines a European Standard (ES) for remote management of CPE WAN interfaces over
broadband networks. It provides an overview of a set of normative references to the suite of individual specifications
comprising the Broadband Forum (BBF) CPE WAN Management Protocol (CWMP) and Data models.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
reference document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE 1: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
NOTE 2: Broadband Forum Technical Reports are available at
http://www.broadband-forum.org/technical/trlist.php.
2.1 Normative references
The following referenced documents are necessary for the application of the present document.
[1] Broadband Forum TR-069: "CPE WAN Management Protocol (CWMP) v1.1".
[2] Broadband Forum TR-104: "DSLHomeTM Provisioning Parameters for VoIP CPE".
[3] Broadband Forum TR-106: "Data Model Template for TR-069-Enabled Devices".
[4] Broadband Forum TR-135: "Data Model for a TR-069 Enabled STB".
[5] Broadband Forum TR-140: "TR-069 Data Model for Storage Service Enabled Devices".
[6] Broadband Forum TR-143: "Enabling Network Throughput Performance Tests and Statistical
Monitoring".
[7] Broadband Forum TR-157: "Component Objects for CWMP".
[8] Broadband Forum TR-181: "Device Data Model for TR-069".
[9] Broadband Forum TR-196: "Femto Access Point Service Data Model".
2.2 Informative references
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
[i.1] ITU-T Recommendation Y.101 (2000): "Global Information Infrastructure terminology: Terms
and definitions".
[i.2] Broadband Forum Technical Report Approval Process.
NOTE: Available at http://www.broadband-forum.org/about/download/trapprovalprocess.pdf.
[i.3] Broadband Forum TR-181 (Issue 1 - February 2010): "Device Data Model TR-069" (superseded
by BBF TR-181 Issue 2).
ETSI
---------------------- Page: 7 ----------------------
SIST ES 203 069 V1.2.1:2014
6 ETSI ES 203 069 V1.2.1 (2011-09)
[i.4] Broadband Forum TR-098 (Amendment 2 - September 2008): "Internet Gateway Device Data
Model for TR-069" (superseded by BBF TR-181 Issue 2).
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ITU-T Recommendation Y.101 [i.1],
Broadband Forum Technical Report Approval process [i.2] and the following apply:
Customer Premises Equipment (CPE): end use system including private network elements connecting the customer
applications to the access line
remote management: management of CPE over a WAN by a service provider
Technical Report (TR): approved technical specification of the Broadband Forum [i.2]
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
3G Third Generation Mobile
ACS Auto-Configuration Server
CPE Customer Premises Equipment
CWMP CPE WAN Management Protocol
FAP Femto Access Point
FDD Frequency Division Duplex
HNB 3G Home NodeB (aka femtocell)
IPTV Internet Protocol TeleVision
LAN Local Area Network
MGCP Media Gateway Control Protocol
NAS Network Attached Storage
PVR Personal Video Recorder
QoE Quality of Experience
QoS Quality of Service
RG Residential Gateway
SIP Session Initiation Protocol
STB Set-Top Box
TR Technical Report
UMTS Universal Mobile Telecommunications System
VoIP Voice over Internet Protocol
WAN Wide Area Network
WEP Wireless Encryption Protocol
4 Conventions
There are no particular notations, styles, presentations, etc., used within the present document.
ETSI
---------------------- Page: 8 ----------------------
SIST ES 203 069 V1.2.1:2014
7 ETSI ES 203 069 V1.2.1 (2011-09)
5 Recommendations
The present document defines the requirements for the remote management of networked devices by a service provider
in a consumer's home. It provides an overview of and the necessary normative references to a family of technical
specifications (see figure 1). It describes how the various technical specifications in this family are related.
The protocol is intended to provide flexibility in the connectivity model:
• The protocol allows both CPE and ACS initiated connection establishment, avoiding the need for a persistent
connection to be maintained between each CPE and an ACS.
• The functional interactions between the ACS and CPE should be independent of which end initiated the
establishment of the connection. In particular, even where ACS initiated connectivity is not supported, all ACS
initiated transactions should be able to take place over a connection initiated by the CPE.
• The protocol allows one or more ACSs to serve a population of CPE. Each CPE can only be associated with
one ACS, while each A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.