SIST EN ISO 10215:2011
(Main)Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)
This International Standard specifies a visual method for determining the image clarity of anodic oxidation coatings on aluminium and aluminium alloys, using a chart scale and a lightness scale, which are defined. The method can be applied only to flat surfaces that can reflect the image of the chart scale pattern.
Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010)
Diese Internationale Norm legt ein visuelles Verfahren zur Bestimmung der Abbildungsschärfe von anodisch
erzeugten Oxidschichten auf Aluminium und Aluminiumlegierungen fest, das ein Messgitter und eine
Helligkeitsskala verwendet. Die Prüfung kann nur auf einer ebenen Fläche angewendet werden, die das Bild des
Messgitters reflektieren kann.
Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)
L'ISO 10215:2010 spécifie une méthode visuelle pour la détermination de la netteté de l'image réfléchie par les couches anodiques déposées sur l'aluminium et les alliages d'aluminium, utilisant une échelle graduée et une échelle de clarté. La méthode n'est applicable qu'aux surfaces planes susceptibles de refléter l'image d'une échelle graduée type.
Anodizacija aluminija in aluminijeve zlitine - Vizualno ugotavljanje ostrine slike v anodizirani plasti - Metoda tabelarične lestvice (ISO 10215:2010)
Ta mednarodni standard določa vizualno metodo za ugotavljanje ostrine slike v anodizirani plasti na aluminiju in aluminijevih zlitinah z uporabo lestvice za ostrino in svetlost, ki sta opredeljeni. Metoda se lahko uporablja le za ploščate površine, ki lahko odsevajo sliko vzorca tabelarične lestvice.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010)Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)77.120.10Aluminij in aluminijeve zlitineAluminium and aluminium alloys25.220.20Površinska obdelavaSurface treatmentICS:Ta slovenski standard je istoveten z:EN ISO 10215:2010SIST EN ISO 10215:2011en,fr,de01-maj-2011SIST EN ISO 10215:2011SLOVENSKI
STANDARDSIST EN 12373-14:20021DGRPHãþD
SIST EN ISO 10215:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 10215
August 2010 ICS 25.220.20 Supersedes EN 12373-14:2000English Version
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2010)
Anodisation de l'aluminium et de ses alliages - Détermination de la netteté d'image sur couches anodiques - Méthode des échelles graduées (ISO 10215:2010)
Anodisieren von Aluminium und Aluminiumlegierungen - Visuelle Bestimmung der Abbildungsschärfe von anodisch erzeugten Oxidschichten - Messgittermethode (ISO 10215:2010) This European Standard was approved by CEN on 14 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 10215:2010: ESIST EN ISO 10215:2011
EN ISO 10215:2010 (E) 2 Contents Page Foreword .3 SIST EN ISO 10215:2011
EN ISO 10215:2010 (E) 3 Foreword This document (EN ISO 10215:2010) has been prepared by Technical Committee ISO/TC 79 "Light metals and their alloys" in collaboration with Technical Committee CEN/TC 132 “Aluminium and aluminium alloys” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2011, and conflicting national standards shall be withdrawn at the latest by February 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12373-14:2000. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 10215:2010 has been approved by CEN as a EN ISO 10215:2010 without any modification.
SIST EN ISO 10215:2011
SIST EN ISO 10215:2011
Reference numberISO 10215:2010(E)© ISO 2010
INTERNATIONAL STANDARD ISO10215Second edition2010-08-15Anodizing of aluminium and its alloys — Visual determination of image clarity of anodic oxidation coatings — Chart scale method Anodisation de l'aluminium et de ses alliages — Détermination de la netteté d'image sur couches anodiques — Méthode des échelles graduées
SIST EN ISO 10215:2011
ISO 10215:2010(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
©
ISO 2010 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii © ISO 2010 – All rights reserved
SIST EN ISO 10215:2011
ISO 10215:2010(E) © ISO 2010 – All rights reserved iii Contents Page Foreword.iv Introduction.v 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Principle.2 5 Apparatus.2 6 Test piece.4 7 Procedure.5 7.1 General.5 7.2 Determination of image clearness C.5 7.3 Determination of image distortion I.5 7.4 Determination of haze value Hn.5 8 Expression of results.6 9 Test report.6 Bibliography.7
SIST EN ISO 10215:2011
ISO 10215:2010(E) iv © ISO 2010 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 10215 was prepared by Technical Committee ISO/TC 79, Light metals and their alloys, Subcommittee SC 2, Organic and anodic oxidation coatings on aluminium.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.