SIST EN 13126-7:2008
(Main)Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches
Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches
This European Standard specifies the requirements and test procedures for durability, strength, security and functionality of finger catches for windows and door height windows.
Baubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 7: Fallen-Schnäpper
Quincaillerie pour le bâtiment - Exigences et methodes d'essai des ferrures de fenetres et portes-fenetres - Partie 7: Verrous de ferme-imposte
La présente Norme européenne spécifie les exigences et les procédures d’essai relatifs a l’endurance, a la résistance, a la sécurité des biens et au fonctionnement des verrous de ferme-imposte pour fenetres et portes-fenetres.
Stavbno okovje - Zahteve in preskusne metode za okna in zastekljena vrata - 7. del: Prstne zaskočke
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catchesQuincaillerie pour le bâtiment - Exigences et methodes d'essai des ferrures de fenetres et portes-fenetres - Partie 7: Verrous de ferme-imposteBaubeschläge - Anforderungen und Prüfverfahren für Fenster und Fenstertüren - Teil 7: Fallen-SchnäpperTa slovenski standard je istoveten z:EN 13126-7:2007SIST EN 13126-7:2008en,fr,de91.190ICS:SLOVENSKI
STANDARDSIST EN 13126-7:200801-marec-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13126-7October 2007ICS 91.190Supersedes CEN/TS 13126-7:2004
English VersionBuilding hardware - Requirements and test methods for windowsand door height windows - Part 7: Finger catchesQuincaillerie pour le bâtiment - Exigences et methodesd'essai des ferrures de fenêtres et portes-fenêtres - Partie7: Verrous de ferme-imposteBaubeschläge - Anforderungen und Prüfverfahren fürFenster und Fenstertüren - Teil 7: Fallen-SchnäpperThis European Standard was approved by CEN on 23 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13126-7:2007: E
EN 13126-7:2007 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Classification.5 4.1 General.5 4.2 Category of use (1 – first digit).5 4.3 Durability (2 – second digit).5 4.4 Mass (3 – third digit).5 4.5 Fire resistance (4 – fourth digit).5 4.6 Safety in use (5 – fifth digit).5 4.7 Corrosion resistance (6 – sixth digit).6 4.8 Security (7 – seventh digit).6 4.9 Application (8 – eighth digit).6 4.10 Test sizes – Size limitations (9 – ninth digit).6 4.11 Example of classification for finger catches.6 5 Requirements.6 5.1 General.6 5.2 Additional tests.7 5.2.1 Mechanical resistance.7 5.2.2 Durability.7 6 Test equipment.7 7 Test methods.7 7.1 Samples.7 7.2 Durability test.8 7.3 Static load test.8 7.4 Corrosion resistance.8 Annex A (informative)
Test assembly.9 Annex B (normative)
Flowchart of test procedure.10 Bibliography.11
EN 13126-7:2007 (E) 3 Foreword This document (EN 13126-7:2007) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This document supersedes CEN/TS 13126-7:2004. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2008, and conflicting national standards shall be withdrawn at the latest by April 2008. EN 13126 Building hardware - Requirements and test methods for windows and doors height windows consists of the following parts: Part 1: Requirements common to all types of hardware Part 2: Casement fastener handles1) Part 3: Manoeuvring fittings for espagnolette bolts/sliding button1) Part 4: Espagnolette bolts1) Part 5: Specification for devices that restrict the opening of windows Part 6: Variable geometry stay hinges (with or without a friction system)1) Part 7: Finger catches Part 8: Tilt&Turn, Tilt-First and Turn-Only hardware Part 9: Pivot hinges1) Part 10: Specification for arm balancing systems Part 11: Specification for top hung fittings Part 12: Specification for side hung fittings Part 13: Sash balances1) Part 14: Sash fasteners1) Part 15: Rollers for horizontal sliding and sliding folding windows and doors Part 16: Hardware f
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.