SIST-TS CEN/TS 13126-7:2005

Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7: Finger catches

This Part of prCEN/TS 13126 gives requirements and test methods for durability, strength, security and function of  finger catches for windows and door height windows.

Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 7: Fallen-Schnäpper

Der vorliegende Teil von EN XXXXX legt die Anforderungen an und Prüfverfahren für Fallen-Schnäpper für Fenster und Fenstertüren fest.

Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Exigences et méthodes d'essai - Partie 7: Verrous de ferme-imposte

La présente partie du prCEN/TS 13126 spécifie les exigences et méthodes d'essai relatives a l'endurance, a la résistance, a la sécurité des biens et au fonctionnement des verrous de ferme-imposte pour fenetres et portes-fenetres.

Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 7. del: Prstne zaskočke

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-2004
• Withdrawal Date: 17-Mar-2008
• ICS: 91.190 - Building accessories
• Technical Committee: ISTP - Doors and windows
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 10-Mar-2008
• Due Date: 02-Apr-2008
• Completion Date: 18-Mar-2008
• Directive: 89/106/EEC - Construction products
• Ref Project: CEN/TS 13126-7:2004 - Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7: Finger catches

Relations

• Replaced By: SIST EN 13126-7:2008 - Building hardware - Requirements and test methods for windows and door height windows - Part 7: Finger catches
• Effective Date: 01-May-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 13126-7:2005
01-januar-2005
6WDYEQRRNRYMHSULWUMHYDOQLVLVWHPL]DRNQDLQ]DVWHNOMHQDYUDWD±=DKWHYHLQ
SUHVNXVQHPHWRGH±GHO3UVWQH]DVNRþNH
Building hardware, fittings for windows and door height windows - Requirements and test
methods - Part 7: Finger catches
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 7: Fallen-Schnäpper
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Exigences et
méthodes d'essai - Partie 7: Verrous de ferme-imposte
Ta slovenski standard je istoveten z: CEN/TS 13126-7:2004
ICS:
91.190
SIST-TS CEN/TS 13126-7:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

TECHNICAL SPECIFICATION
CEN/TS 13126-7
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2004
ICS 91.190
English version
Building hardware, fittings for windows and door height windows
- Requirements and test methods - Part 7: Finger catches
Quincaillerie pour le bâtiment, ferrures de fenêtres et Baubeschläge, Beschläge für Fenster und Fenstertüren -
portes-fenêtres - Exigences et méthodes d'essai - Partie 7: Anforderungen und Prüfverfahren - Teil 7: Fallen-
Verrous de ferme-imposte Schnäpper
This Technical Specification (CEN/TS) was approved by CEN on 18 August 2003 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 13126-7:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

CEN/TS 13126-7:2004 (E)
Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions.4
4 Classification.4
5 Requirements. .5
6 Test apparatus.6
7 Test methods.6
(Informative)
Annex A Apparatus.8
Annex B (normative) Flowchart of test procedure.9
2

---------------------- Page: 3 ----------------------

CEN/TS 13126-7:2004 (E)
Foreword
This document (CEN/TS 13126-7:2004) has been prepared by Technical Committee CEN/TC 33
“Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by
AFNOR.
A full contribution to the preparation of this Technical Specification has been made by the European
manufacturers organisation ‘ARGE’ and National Standards institutions.
This Technical Specification is one of a series of Technical Specifications dedicated to building
hardware products. It is divided into seventeen parts to incorporate all types of windows and door
height windows.
Informative annex A of CEN/TS 13126-1 gives detailed schedules of the elements of components of
the seventeen parts of this Technical Specification.
Normative annex B of CEN/TS 13126-1 gives schedules of the elements of components used on the
21 types of window opening functions.
Normative and informative annex to all parts of this Technical Specifications are indicated in the
content of the seventeen parts.
The performance tests incorporated in this Technical Specification are considered to be reproducible
and as such will provide a consistent and objective assessment of the performance of these products
throughout CEN Member States.
Annex A is informative and annex B is normative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 4 ----------------------

CEN/TS 13126-7:2004 (E)
1 Scope
This Part of CEN/TS 13126 gives requirements and test methods for durability, strength, security and
function of finger catches for windows and door height windows.
2 Normative references
Th
...