SIST IEC 60072-3:2001

Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors - Flange numbers BF10 to BF50

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Dimensions et séries de puissances des machines électriques tournantes - Partie 3: Petits moteurs incorporés - Désignation des brides BF10 à BF50

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Dimensions and output series for rotating electrical machines - Part 3: Small built-in motors; flange numbers BF10 to BF50

General Information

• Status: Published
• Publication Date: 28-Feb-2001
• ICS: 29.160.30 - Motors
• Technical Committee: ERS - Rotating machinery
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Mar-2001
• Due Date: 01-Mar-2001
• Completion Date: 01-Mar-2001
• Ref Project: IEC 60061-3:1969/AMD21:1999 - Amendment 21 - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges

Standards Content (Sample)

SLOVENSKI STANDARD
SIST IEC 60072-3:2001
01-marec-2001
Dimensions and output series for rotating electrical machines - Part 3: Small built-
in motors; flange numbers BF10 to BF50
Dimensions and output series for rotating electrical machines - Part 3: Small built-in
motors - Flange numbers BF10 to BF50
Dimensions et séries de puissances des machines électriques tournantes - Partie 3:
Petits moteurs incorporés - Désignation des brides BF10 à BF50
Ta slovenski standard je istoveten z: IEC 60072-3
ICS:
29.160.30 Motorji Motors
SIST IEC 60072-3:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST IEC 60072-3:2001

---------------------- Page: 2 ----------------------

SIST IEC 60072-3:2001
NORME CEI
INTERNATIONALE IEC
72-3
INTERNATIONAL
Première édition
STANDARD
First edition
1994-03
Dimensions et séries de puissances
des machines électriques tournantes -
Partie 3:
Petits moteurs incorporés -
Désignation des brides BF10 à BF50
Dimensions and output series for rotating
electrical machines -
Part 3:
Small built-in motors -
Flange numbers BF10 to BF50
Droits de reproduction réservés — Copyright — all rights reserved
© CEI 1994
de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
Aucune partie
forme et par aucun pro- any form or by any means, electronic or mechanical,
utilisée sous quelque que ce soit
ron ue ou mécanique, compris photocopie et including photocopying and microfilm, without permission
cédé, élect iq y la
les microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher.
Bureau Central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève, Suisse
Commission Electrotechnique Internationale CODE PRIX
International Electrotechnical Commission
D
PRICE CODE
IEC MeautriaponHaa 3neKrporexHw iecKaa HoMHCCHR
Pour prix, voir catalogue en vigueur
•
For price, see current catalogue

---------------------- Page: 3 ----------------------

SIST IEC 60072-3:2001
72-3 ©IEC:1994 - 3 -
INTERNATIONAL ELECTROTECHNICAL COMMISSION
DIMENSIONS AND OUTPUT SERIES
FOR ROTATING ELECTRICAL MACHINES
Part 3: Small built-in motors -
Flange numbers BF10 to BF50
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international cooperation on all questions concerning standardization in the electrical and
electronic fields. To this end and in addition to other activities, the IEC publishes International Standards.
Their preparation is entrusted to technical committees; any IEC National Committee interested in
the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC also participate in this preparation. The IEC
collaborates closely with the International Organization for Standardization (ISO) in accordance with
conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of the IEC on technical matters, prepared by technical committees on
which all the National Committees having a special interest th
...