SIST EN 3475-508:2004
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
This standard specifies the procedures for measuring the plating thickness and centricity of metallic coatings on single conductors.
It shall be used together with EN 3475-100.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 508: Schichtdicke des Überzugs
Diese Norm legt die Verfahren zum Messen der Schichtdicke und Zentrizität von metallischen Überzügen auf Einzeldrähten fest.
Sie ist in Verbindung mit EN 3475-100 anzuwenden.
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 508: Epaisseur du revetement
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thicknessLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 508: Schichtdicke des ÜberzugsSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essais - Partie 508: Epaisseur du revetementAerospace series - Cables, electrical, aircraft use - Test methods - Part 508: Plating thickness49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-508:2002SIST EN 3475-508:2004en01-maj-2004SIST EN 3475-508:2004SLOVENSKI
STANDARD
SIST EN 3475-508:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-508June 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 508: Plating thicknessSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essias - Partie 508: Epaisseurdu revêtementLuft- und Raumfahrt - Elektrischen Leitungen für LuftfahrtVerwendung - Prüfverfahren - Teil 508: Schichtdicke desUberzugsThis European Standard was approved by CEN on 20 January 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3475-508:2002 ESIST EN 3475-508:2004
EN 3475-508:2002 (E)2ForewordThis document (EN 3475-508:2002) has been prepared by the European Association of AerospaceManufacturers (AECMA).After enquiries and votes carried out in accordance with the rules of this Association, this Standard hasreceived the approval of the National Associations and the Official Services of the member countries ofAECMA, prior to its presentation to CEN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by December 2002, and conflicting national standards shall bewithdrawn at the latest by December 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway,Portugal, Spain, Sweden, Switzerland and the United KingdomSIST EN 3475-508:2004
EN 3475-508:2002 (E)31ScopeThis standard specifies the procedures for measuring the plating thickness and centricity of metallic coatingson single conductors.It shall be used together with EN 3475-100.2Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications.These normative references are cited at the appropriate places in the text and the publications are listedhereafter. For dated references, subsequent amendments to or revisions of any of these publications apply tothis European Standard only when incorporated in it by amendment or revision. For undated references thelatest edition of the publication referred to applies.ISO 6955Analytical spectroscopic methods – Flame emission, atomic absorption, and atomicfluorescence – VocabularyEN 3475-100Aerospace series – Cables, electrical, aircraft use – Test methods – Part 100: General3Test methodsFour methods may be used. In the event of dispute, method 4 shall be the reference method for themeasurement of plating thickness.3.1Test method 13.1.1PrincipleThis method uses an analytical procedure for evidence of elements and determining concentration by meansof measuring the atomic absorption of optical radiation. The average plating thickness is determined byconverting the measured element concentration.The determination of the centricity (distribution of the metal coating) is not possible with this method.3.1.2MethodA flame AAS (Atome Absorption Spectrometry) is sufficient to determine metal concentrations as defined inISO 6955.Other procedures, e.g. graphite tube, cold steam or hybrid technique, permit higher resolutions.General instructions on the necessary equipment, such as gas fuels, oxidizers, light sources, etc., and theactual operation of the equipment can be found in the operating instructions for the relevant AAS equipment.Typical detection limits for flame AAS: see table 1.Table 1Elementmg/lAg0,002Ni0,01Sn0,001SIST EN 3475-508:2004
EN 3475-508:2002 (E)43.1.3CalibrationIn atomic absorption spectrometry calibration shall take place by the use of reference solutions (standardsolutions).Standard solutions are solutions which contain the element to be assessed (e.g. Ag, Ni, Sn) in a knownconcentration and, if required, the chemicals used in producing the sample solution and the componentsaffecting the measurement in the same or a similar concentration to the sampl
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.