SIST EN 14721:2005+A1:2008
(Main)Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
This European Standard specifies two methods of measuring the fibre content of metallic fibre concrete. Method A measures the fibre content of a hardened concrete specimen. Method B measures the fibre content of a fresh concrete specimen.
This European Standard does not apply to sprayed concrete.
Prüfverfahren für Beton mit metallischen Fasern - Bestimmung des Fasergehalts in Frisch- und Festbeton
Dieses Dokument legt zwei Verfahren zur Bestimmung des Fasergehaltes von Beton mit metallischen Fasern fest. Verfahren A dient der Bestimmung des Fasergehaltes in Festbetonproben, Verfahren B der Bestimmung des Fasergehaltes in Frischbetonproben.
!Diese Europäische Norm gilt nicht für Spritzbeton."
Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
Preskusna metoda za beton s kovinskimi vlakni - Merjenje deleža vlaken v svežem in strjenem betonu
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concretePreskusna metoda za beton s kovinskimi vlakni - Merjenje deleža vlaken v svežem in strjenem betonuMéthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durciPrüfverfahren für Beton mit metallischen Fasern - Bestimmung des Fasergehalts in Frisch- und FestbetonTa slovenski standard je istoveten z:EN 14721:2005+A1:2007SIST EN 14721:2005+A1:2008en,fr,de91.100.30ICS:SLOVENSKI
STANDARDSIST EN 14721:2005+A1:200801-marec-2008
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14721:2005+A1
September 2007 ICS 91.100.30 Supersedes EN 14721:2005 English Version
Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete
Méthode d'essai du béton de fibres métalliques - Mesurage de la teneur en fibres du béton frais ou durci
Prüfverfahren für Beton mit metallischen Fasern - Bestimmung des Fasergehalts in Frisch- und Festbeton This European Standard was approved by CEN on 27 June 2005 and includes Amendment 1 approved by CEN on 16 August 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14721:2005+A1:2007: E
EN 14721:2005+A1:2007 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Principle.4 4 Apparatus.4 5 Test specimens.5 6 Testing procedures.5 7 Expression of results.7 8 Test report.7 9 Precision.7
EN 14721:2005+A1:2007 (E) 3 Foreword This European Standard (EN 14721:2005+A1:2007) has been prepared by Technical Committee CEN/TC 229 “Precast concrete products”, the secretariat of which is held by AFNOR. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2008 and conflicting national standards shall be withdrawn at the latest by March 2008. This document includes Amendment 1, approved by CEN on 2007-08-16. This document supersedes EN 14721:2005. The start and finish of text introduced or altered by amendment is indicated in the text by tags ! ". According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EN 14721:2005+A1:2007 (E) 4 1 Scope This European Standard specifies two methods of measuring the fibre content of metallic fibre concrete. Method A measures the fibre content of a hardened concrete specimen. Method B measures the fibre content of a fresh concrete specimen. !This European Standard does not apply to sprayed concrete." 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12350-6, Testing fresh concrete – Part 6: Density EN 12390-7, Testing hardened concrete – Part 7: Density of hardened concrete 3 Principle Fibres are extracted from a hardened (Method A) or fresh (Method B) concrete sample and the fibre content is determined from the mass of fibre and the volume of the concrete sample. 4 Apparatus 4.1 Method A 4.1.1 Core drill equipment, capable of extracting test cores from the hardened concrete to the volume
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.